
post
Thats a peanits
Why's the TP holder pointing up?
Also, is the TP just kinda floating there a little?
Because AI confused a toilet roll holder with a wall mounted lamp and gave us something in-between.
I’m on vacation in Switzerland right now and I’ve seen this in a bunch of people’s home bathrooms.
Maybe because you’re less likely to accidentally whack the roll and knock it to the floor? 🤷♂️
Does it unravel a little and brush against things?
It actually doesn’t. They have this absurdly high quality toilet paper that’s about 1.5x longer than the squares I always see in Canada, and it’s got to be like quilted 3 ply. It unrolls reluctantly and I swear I hear an angel chorus every time I pull a sheet.
Interesting. I usually go for the charmin strong, but even it, when I place it on my toilet paper holder which holds 5 rolls vertically like that. If the first glued on roll comes loose it'll unravel annoyingly.
Bro I have been to Europe once in my life and one of the few things my shattered psyche committed to long term memory was the multi-ply toilet paper. Like, the middle layer was a different material from the outer layers. These mfs have bidets AND good tp dude we live in the stone age on this side of the pond
Must be cat owners.
Huh I thought we were laughing at the dick button but apparently people are confused by wall mounted toilets? 😅
I hate it. it must have absolutely massive wall support
Would not work for the average American
It's funny I've lived with these all my life without even considering it 😅 Even public bathrooms which have to accommodate all kinds of people and ungodly usage scenarios commonly have those here. I've never heard stories of it being a problem ever.
However, these are usually mounted in solid brick or concrete walls, so that's probably why it works here
Very common in Europe.
There is a steel frame behind the wall bolted to the wall and to the floor with the water container/chamber, and the toilet is held up by huge metal bolts.
The ceramic toilet part can usually hold minimum 300-400 kg, so you could dance on it without any issue.
It can be fully serviced through the push button plate.
Advantages: visually more clean, easier cleaning under the bowl, quiet operation behind the wall while filling up the chamber with water.
-
window
-
transdimensional tp
-
penis button
-
gap under toilet for extra cleaning
-
open plan bathroom with no door
-
rounded wall corner
-
wallpaper close enough to absorb poop particles
-
lid doesn't match rest of throne
-
no access to plumbing in my private domicile
get me outta here
Looks like a pretty typical European toilet? What’s the problem?
The large flush button looks like it got clipped on the left but that could be a weird artistic decision.
The flush button looks like a penis.
I hate european toilets for this reason. If I cannot access the cistern due to a plumbing problem and have to literally rip apart panelling to diagnose any issue, then this toilet is anti-consumer
Edit: Actual Europeans pointing out that you can access the cistern by pulling out the button plate. Makes sense now, apologies, I didn't know - it really looked like it was access hostile
You can access and replace the entire internal mechanism through the hole the wall plate for the flush buttons is mounted on.
No need to apologize. Even access through that panel is ridiculous. Those panels are 20x40cm max. Working at 90 degrees through a small opening is unnecessarily hard. And major repairs, which will be once every 30 years or so will require ripping the wall open.
It only makes sense for commercial installs where Hotels go through complete renovations every 10 years and and an extra .5 meter clearance is critical because the bathrooms are tiny in downtown European cities.
Maybe there's a closet for it rather than it just being in the wall?
Yes, but where -- in a different room or an outside panel even.
Imagine needing to check the cistern and flush it - you have to run into the bathroom and out of it constantly to check
It's right there behind the buttons. The whole button panel comes off, and leaves a hole in front of the mechanism.
Yeah, it could be a pain occasionally, though the amount of times I've opened it up to look in the past few years is few and the times I actually needed to get in there has been none so far here.
Though there was one toilet at one place I lived that wouldn't close that seal properly and would just keep running the water since it couldn't fill the reservoir and it needed to be pushed down every flush. But it was a college age problem that would have been better solved by solving the issue instead of dealing with it for the years we were there.
And on the pros side, less cleaning required, and what you need to clean is a simpler shape. Even better if that bathroom has a drain in the floor and the shower head can reach everywhere, though I doubt that's the case with those floors.
Press button for penis in ass
That wood floor is going to be gross in a few years.
You mean you don't have a full-length window to peer down on the peasants as you take your morning constitutional on your wall-mounted designer toilet?
That's a normal toilet? Are US-Americans again confounded by something completely mundame, simply cos it doesn't exist in their narrow mind which only consists out of US stuff? Lol
I wouldn't trust whatever is holding it to the wall long term.
Why? Most commercial toilets are wall mounted and get shat in way more than consumer plinth toilets.
Because, on Lemmy, trust, optimism, and most expressions of positive thinking are seen as weakness, ignorance, or both.
As a disabled dude who sits down on the shitter with the force of a kid literally jumping into bed, I give this toilet 2 visits with my ass before it tears off the wall.
Most consumer toilets are attached to concrete or cinder block walls but home walls are usually wood and drywall.
As I'm currently building myself a house I can tell you that the wall mounted toilets are rated for 400kg at the tip,the furthermost from the wall, of the bowl.
400kg
That's only 3 USAians if they are static.
Get 250kg (combined) humping reverse cowgirl and see what forces you get.
OK. It just seems like unnecessary engineering for the small advantage of being easier to clean under.
It's really just a steel frame that gets bolted to the wall. Further down someone linked to one from Geberit, cost like 120€. It also has the water tank.
Easier cleaning is one thing and the best feature if you don't care about the ecstatics. You can also chose the height freely.
AI? Absolutely seamless window frame and baseboard trim, like it’s one single piece and completely uniform.
It's a 3D render. They also provide their CAD files.
It is pretty funny to me that AI has made people completely forget that things like Photoshop and Blender exist, instead categorizing all content as "100% real" or "100% AI".
It is pretty funny to me that Photoshop® has made people completely forget that image editors like krita and the gimp exist, instead categorizing all tool categories by brand names.

all 84 comments