[–] 1 point 2 weeks ago* (last edited 2 weeks ago) (2 children)

I don't think anybody makes anything like that. It's doable but impractical. What's the purpose? Best I can suggest is some foldable mechanism to hang it from which let you choose the angle to balance it at. Think circular pocket sundial but instead there's a laser pointer attachment.

If you need full motion compensation you need an actual gimbal (not that small, but accessible) or a tiny laser projector with a full 6DOF IMU (good luck finding one) and ideally SLAM surface tracking (not happening in a keychain size object lol).

If you have the budget I feel like you could call up one of the companies making either multitools and laser levels, or call a company making handheld LIDAR scanners or 3D object scanners. If you don't have the budget, get a basic gimbal.

I know surface tracking projectors exists, but they're all research prototypes and none are small.

  • source
  • parent
  • context
  • [–] 6 points 2 weeks ago

    Just joined my local tool library so I can check out tools as part of my membership. Anything I should be doing this fall to clean up for the winter? Any excuse to play with tools

  • source
  • [–] 8 points 2 weeks ago

    i just collected the last of my tools from my former job. it’s nice to have everything together again. it’s no good to turn around to grab the whatever and realize it’s sitting in the toolbox at work.

  • source
  • [–] 5 points 2 weeks ago

    I'm in the same boat. Just moved into a place and the garage has a lot of work to be set up. I had been at my last place for six years, so everything was well established. Different space, different configuration, different mindset... I had to get axles on my project to get it rolling before the move, so the moment that was done, it was a rush to throw everything into boxes and get it all to the new place. It has not helped me on this end, but it is all here and I've been slowly going through everything to get it where it needs to be for whatever project or job I've got to do.

  • source
  • parent
  • context
  • [–] 9 points 2 weeks ago (2 children)

    Nice! Welcome.

    Hrm recent tool experiences. A friend got me a new pruning saw. Dang that thing's sharp!

    Some cycling specific tools (and parts) on the way to help rebuild my old mtb.

    Storage is what's killin me currently. New garage and nothing's set up nicely yet. Carp everywhere

  • source
  • Actually I bought I a 1/3 horsepower craftsman garage door opener for my father and helped him install it because my mother didn't trust him to do it when i was 16 (says a lot about my mother's trust of her husband) but that was more than 20 years ago now. Garage door has to be rated for 175mph (281kph) winds because they live in Florida for building codes. Never had an issue since.

  • source
  • parent
  • context
  • [–] 9 points 2 weeks ago (2 children)

    And you had a damn good chance of never needing to use their warranty. Their wrenches in particular were beast mode. My socket set was a gift from my grandparents back in 93 or 94, and every socket and both wrenches are perfect. Well, a little bit of grease in the grooves of the lettering, but they keep cranking along over the decades with no issues at all same with the standard wrenches I bought myself not long after.

    I've hammered on the big socket wrench trying to break stubborn bolts back when I was too young to do the smart thing and work at it patiently. Didn't even dent the bugger, much less bend it.

    My dad's screwdriver set is even older and other than the handles showing chips and dings, are fine.

    Craftsman was the absolute most reliable brand back before the company got gutted.

  • source
  • parent
  • context
  • [–] 10 points 2 weeks ago* (3 children)

    Craftsman tools used to be great years ago, and sold by a company called sears "now bankrupt" but basically had a policy that was if you bought a wrench of x size and it broke, they would replace it without a receipt with the same or newer model they sell now. Then battery powered tools came out and they obviously had to change their policies, but still non electric tools was the same. 9mm socket, bring in the broken one, no questions

  • source
  • parent
  • context
  • [–] 18 points 2 weeks ago* (6 children)

    I left reddit years ago, and am not familiar with the sub, but what's it about? Are you going to tell me that my craftsman c3 19.2volt batteries are to old, lol. Because I'm amazed every time I need to use them and they still charge and work for the small tasks I ask of them. I must have got them between 2006-2008 maybe?

  • source
  • [–] [S] 0 points 1 month ago (1 child)

    think of the person you stole from, and ask for forgiveness in the mind, even if you stole something at nine years old. This will clear your head of running thoughts, clear your mind of mental fog, and help you sleep better at night, so you can make better decision, judgments, and life choices. Otherwise, you will just delete others and yourself using Alzheimer’s disease. Use “there is a right way to do anything”, to keep yourself in the clear-minded state. Do this, even if you stole something at nine years old, stole something one time, stolen a small piece of Lego toy, or stolen from a family member or relative (in which case, you might need to personally apologize to the relative).

  • source
  • parent
  • context
  • [–] 2 points 1 month ago

    I know they exist because a job I worked at need some for assembling certain products. I don’t remember the brand name but they were expensive enough they’d really only ever be bought for professional use. These were for smaller screws in electronics, but I’m sure they exist for larger sizes, too

  • source
  • view more: ‹ prev next ›