My wife was trying to clean our kettle

I said, it needs CLR

she asked what CLR is

I said Calcium Lime and Rust. There is also Lime-Away.

She put the CLR in there. Then she washed it out many times. All of the mineral deposits washed away. She rinsed it out with water many more times, and then eventually cleaned it with vinegar after rinsing it many times. At least, I think that's how she cleaned it. She's the kettle cleaner, I don't know much about it, other than that CLR exists.

It was very clean for a few months.

We got a regular kettle after that

top 68 comments

sorted by: hot top controversial new old
[–] 24 points 4 months ago (5 children)

Citric acid.

Drop a teaspoon of citric acid into a full kettle, boil it, empty it, rinse it out, repeat if needed. That blasts away the build up. It is how high end kettles like Fellow stag recommends cleaning their kettle too because you can't scrub its mirror finish hotplate.

  • source
  • hideshow 5 child comments
  • [–] 20 points 4 months ago (9 children)
  • [–] 12 points 4 months ago* (last edited 4 months ago) (4 children)

    Used to do this and stink up the room, then discovered citric acid powder. 1tbps in 2 cups of water. Boil in it the kettle. Rise Rinse repeat once. Then fill it up with regular water and boil again.

    No smell. And a clean kettle.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 5 points 4 months ago (3 children)
  • [–] 17 points 4 months ago

    I just boil a tablespoon or two of vinegar. Unless you let it get totally out of control any weak acid will work instantly, it's food safe, and I already have vinegar in my pantry. Rinse twice or your next coffee/tea may taste off.

  • source
  • [–] 11 points 4 months ago (11 children)

    Tbh doesn't sound that hard, unless I'm missing something in the description.

    What would make the stove-top kettle easier to descale?

  • source
  • hideshow 11 child comments
  • [–] [S] 2 points 4 months ago (10 children)

    It's all smooth in there. There aren't a bunch of grooves and components in there.

  • source
  • parent
  • hideshow 10 child comments
  • [–] 5 points 4 months ago (9 children)

    You do know there are electric kettles available that are smooth inside? I wouldn't buy the kind with an open heating element and plastic on the inside. Instead, get one with stainless steel inside.

  • source
  • parent
  • hideshow 9 child comments
  • [–] [S] 3 points 4 months ago (8 children)
  • [–] 2 points 4 months ago (7 children)

    They're also safer than stove top with the auto shutoff. You can get them at thrift stores pretty cheap.

  • source
  • parent
  • hideshow 7 child comments
  • [–] [S] 2 points 4 months ago (6 children)

    No, most cheap ones are the metal kind with exposed components, not the glass kind with the metal bottom.

  • source
  • parent
  • hideshow 6 child comments
  • [–] 1 point 4 months ago (5 children)

    The kind I mean has a detachable platform, and a very simple kettle interior. They are very cheap. No glass to be found.

  • source
  • parent
  • hideshow 5 child comments
  • [–] [S] 1 point 4 months ago (4 children)

    That's what they look like! There's a big wire inside!

  • source
  • parent
  • hideshow 4 child comments
  • [–] 2 points 3 months ago (3 children)

    I will have to show you a picture of inside mine when I get home.

    I assume the one you had looks like this inside: https://www.youtube.com/watch?v=_yMMTVVJI4c&t=406

    The one I have doesn't have an exposed heating element, it is flat and smooth in there.

    Like this one, but cheaper because it isn't all glassy fancy: https://www.youtube.com/watch?v=_yMMTVVJI4c&t=716

  • source
  • parent
  • hideshow 3 child comments
  • [–] [S] 2 points 3 months ago (2 children)

    I didn't click on these, but I imagine it's Never Gonna Give You Up.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 11 points 4 months ago (4 children)

    Damn, you must have some really hard water. I've never really felt the need to clean out any of my kettles.

  • source
  • hideshow 4 child comments
  • [–] 14 points 4 months ago* (last edited 4 months ago) (2 children)

    Not sure where OP lives, but I’m in the UK and have to descale my kettle at least twice a year.

    According to the internet, my area is around 297ppm.

    Never heard of CLR, but we get descaling sachets from the supermarket - I assume it’s similar? Either way, they’re dirt cheap and quick to do, so it’s not really an issue.

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 5 points 4 months ago*

    I learned about CLR because of a similar product, called Lime-Away

    "Lime, Calcium and Rust, Lime-away is a must!"

    So when I went to the store to find Lime-away, I saw CLR, which is titled just like the Lime-away commercial, and I just used that instead. I don't know if I've ever even tried Lime-away.

    Then, years later, I met my wife.

  • source
  • parent
  • [–] 10 points 4 months ago (1 child)

    So glad I live in a soft-water area. Weirdly, the local supermarkets still sell limescale removal products. No idea who's buying them.

  • source
  • hideshow 1 child comment
  • [–] 7 points 4 months ago

    Blogs and influencers telling you to use them without providing context about why you’d use them.

    People following those blogs and influencers without asking the same questions.

    Every comment thread on TikTok is people loudly arguing about things like that and later they potentially realize not everything is the same in every place.

    Sigh.

  • source
  • parent
  • [–] 7 points 3 months ago

    All you need is vinegar and water.

  • source
  • [–] 6 points 4 months ago (6 children)

    What's a "regular" kettle?

  • source
  • hideshow 6 child comments
  • [–] [S] 3 points 4 months ago (4 children)

    you know, it's got a lil spout, you put it on the stove.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 10 points 4 months ago

    Why would you think that would be easier to clean? The water will still partially evaporate, and the mineral contents will also be the same.

    Granted, maybe you got a kettle that is really hard to look into, which would "solve" the cleaning problem.

  • source
  • parent
  • [–] 3 points 4 months ago (1 child)

    Right, I've heard of that. Never seen one in my life.

    I second the citric acid tip, it dissolves the limescale really well, no scrubbing needed. How do you clean the stovetop kettle?

  • source
  • parent
  • hideshow 1 child comment
  • [–] 4 points 3 months ago (4 children)

    We have a bosch glass kettle and they sell this expensive kettle cleaner.

    We found out you just boil a cut in half lemon in there and it comes out spotless.

  • source
  • hideshow 4 child comments
  • [–] 3 points 3 months ago* (3 children)

    Citrus acid is an outstanding cleaner. You can get a bag of it cheap. (Compared to using real fruit)

  • source
  • parent
  • hideshow 3 child comments
  • [–] 4 points 3 months ago (2 children)

    Luckily we just pull them off the tree out the front when it's kettle cleaning season

  • source
  • parent
  • hideshow 2 child comments
  • [–] 4 points 4 months ago (3 children)

    Nobody uses baking powder/soda? It's how I used to clean my black tea thermos: baking powder, hot water on top (might foam iirc), let it stand for a few hours. Repeat if required.

    Mixed with vinegar it's even more potent.

    BTW, CLR is the name of the prodcut, not its ingredients, which are a mix of acids.

  • source
  • hideshow 3 child comments
  • [–] 5 points 4 months ago*

    I wouldn’t imagine baking powder/soda would be terribly effective to dissolve calcium buildup in a kettle. I suppose it could work like a water softener exchanging calcium/sodium ions over time…

    I haven’t thought to use baking soda for tea stain because it is so mild a base, but it just might work! I’ll have to give that and washing soda a try. I usually use oxiclean or denture cleanser.

  • source
  • parent
  • load more comments (1 reply)
    [–] 4 points 3 months ago*

    Vinegar, water, let it sit over night and wash it out the next day.

    Or just ignore it, it's not like it boils water noticeable less effective.

  • source
  • [–] 3 points 4 months ago (7 children)

    so vinegar alone was not cutting it. works for me usually but our water is not that hard.

  • source
  • hideshow 7 child comments
  • [–] [S] 3 points 4 months ago (6 children)
  • [–] 3 points 4 months ago (5 children)

    Half n half, vinegar and water. Fill the kettle halfway with this solution and turn it on. It'll boil, limescale disappears and you can boil a second, water only cycle to get rid of any lingering vinegar taste, or wash with soap as normal.

    Regular kettles will also pick up limescale and minerals after boiling water repeatedly. I've not found this to be unique to an electric kettle.

  • source
  • parent
  • hideshow 5 child comments
  • [–] [S] 2 points 4 months ago (4 children)

    It's unique in that it's harder to clean. Yes the smooth ones do also build up minerals.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 3 points 4 months ago (3 children)

    Ah, didn't realize it's the kind that has the element exposed. Those aren't common where I am. The cheap kettle I have uses a hot plate instead so I forgot about the other variety. Don't blame you for going back to the stovetop one then

  • source
  • parent
  • hideshow 3 child comments
  • [–] [S] 2 points 4 months ago (2 children)

    The stovetop ones are more common. They're usually made of ceramic or metal, sometimes glass or cast iron. I had a glass one I really loved, but it shattered. I replaced it three times before I gave up. Metal it is.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 4 months ago

    Like others have said, all it takes is a weak acid. I use white vinegar because it’s cheap and I already have it on hand, but lemon/lime juice or whatever will do in a pinch too.

    I have really hard water at my work and all I ever need to clean my kettle is white vinegar and time. If it’s not to bad, I use a splash of vinegar (a tablespoon or several) and enough water to cover the buildup and be swirlable. Then just let it sit and work for 20 minute to an hour. Rinse well and you’re done.

    If I’m impatient and want to speed it up (or just want to feel like I’m contributing effort), I’ll warm it up a little, swirl it around it every so often, or give it a light brushing from time to time to dislodge any loose crusties.

    If the buildup is bad, you don’t really need to dilute the vinegar. If there’s still residue after an hour or two, you can dump it if you like. and rinse out any loosened buildup, and refresh the vinegar. Repeat as needed.

  • source
  • [–] 2 points 3 months ago

    I have an electric kettle at work and a stove top kettle at home, in an area with incredibly hard water. I just rinse them occasionally and some flakes come out. Why care? They still work fine to boil my water. The electric kettle is only 2 years old, but the other one is about 20 now and still is fine.

  • source
  • [–] 2 points 3 months ago

    I only use reverse osmosis filtered water in mine, no deposits!

    Can also help to pour out the remaining water instead of letting it evaporate.

  • source
  • [–] 1 point 3 months ago (1 child)

    I just heat water in the microwave.

  • source
  • hideshow 1 child comment
  • [–] 1 point 4 months ago

    I pound it out with an air needle scaler, but I'm a barbarian.

  • source
  • [–] 1 point 3 months ago

    You need to choose your kettles carefully and get one that is easy to clean. Or just don't look. The iron and calcium won't kill you.

  • source