you are viewing a single comment's thread
view the rest of the comments
[–] 27 points 1 year ago (18 children)

I don't think we'll have open source 2d printers. Not the way they're built now, anyway.

On first glance, it might look like 2d is an easier problem than 3d. However, laying down plastic filament doesn't need the same precision level as 2d ink/toner printing. Even 300dpi is far more precise than any 3d printer does, and that's not particularly impressive for a modern 2d printer.

That's not even getting into mixing and aligning color cartridges.

The industry also has a lot of patents around it. So there's that whole mess to deal with.

Framework looked at making their own 2d printer, and they noped right out.

Would you accept a printer that works like a typewriter with arms that strike the page to lay down text? That might work. They're mechanically quite complex, though. There's lots of OK designs that tend to jam up.

  • source
  • hideshow 18 child comments
  • [+] [S] 17 points 1 year ago (6 children)
  • [–] 6 points 1 year ago (3 children)

    You are missing a vital part of how a laser printer works. The toner is dusted onto a drum that has a static charge. That charge is manipulated by the laser, which means that there is a very specific frequency that the laser has to utilize and it has to be keyed to the material used for the drum. I would have to dig more into the specific interaction, but I am pretty sure that off the rack lasers and drums are not going to be functional, both in wattage and frequency.

    So the laser printer process is: a laser traces the negative space on a drum with a static charge to discharge those spots, next a pigment substrate is dusted onto the drum, being held by the static where the positive space is going to be. Following that, a heater heats the substrate to permanently affix it to the page.

  • source
  • parent
  • hideshow 3 child comments
  • [+] [S] 2 points 1 year ago (2 children)
  • [–] 4 points 1 year ago (1 child)

    Just letting you know that you are definitely suffering a Dunning Kruger moment. I have had to study how printers work all the way down to the electrochemical level and no paper printer is simple to make aside from a dot matrix printer. In my educated opinion I will say that you are borderline correct that a laser printer might be more feasible from a materials standpoint, neither are feasible in general for a home lab, let alone a guy at his kitchen table assembling a kit.

    Laser printers and ink jet printers involve extremely complex electrochemical and physical processes to function that a home lab is going to struggle to replicate. The optics for laser printers have to be assembled in a clean room because even a single stray particle of dust will destroy the print quality for a large section of the page. Ink jet printers use tiny heaters to vaporize the ink and electric fields to propel it through a nozzle to the page. These jets are created using multilayer acid etched circuitboards that are precicely tuned for the specific inks and substrates that are used.

    These are just examples of challenges to overcome, and are by no means exhaustive.

    I hate the printer companies probably more than anyone here, so do not think I am a shill for them. I am articulating why what you are saying is impractical and unreasonable. Laser printers are probably easier to source most of the mechanical parts, but assembly is obscenely delicate and prohibitive. Ink jet printers are simpler to recreate and assemble, but the miniaturization required makes it impossible to do at home.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 6 points 1 year ago (4 children)

    Would you accept a printer that works like a typewriter with arms that strike the page to lay down text?

    What about a 2d pen plotter? Not nearly as fast as an inkjet, but still open source

  • source
  • parent
  • hideshow 4 child comments
  • [–] 3 points 1 year ago (2 children)

    We wouldn't need to reinvent the printer, just replace the computer in it. It wouldn't be completely open source but it would be cheap.

    Also, maybe we can make inkjet resin 3d printers

  • source
  • parent
  • hideshow 2 child comments
  • [–] 3 points 1 year ago (1 child)

    The software is where most of the magic happens. How do you control steppers and ink output otherwise?

  • source
  • parent
  • hideshow 1 child comment
  • [–] 2 points 1 year ago

    Not to dismiss the very real problem you raise, but that only has to be solved once per hardware configuration. This is why digital piracy is so successful - you only need the efforts of some very talented individuals to solve that particular problem and you're good. As hard as that may be, it's still simpler than manufacturing and assembling hardware where accuracy to 1/1000" in a dust-feee environment is a requirement.

  • source
  • parent