96
Let’s Do This! Remove Tarriffs on EVs (pressreader.com)
submitted 1 year ago by to c/canada@lemmy.ca
25 comments fedilink hide all child comments
 

If we want to advance our economy, we need to embrace EV adoption. We already invested heavily into EV supply chains.

you are viewing a single comment's thread
view the rest of the comments
[–] 7 points 1 year ago (5 children)

I know one of the problems is the clips we use for attaching car seats for small children. Since they don't match what we use, we'd probably have to switch to European car seats too. No idea which is safer or why we have the differences, but I'd bet there are lots of little safety things that don't line up between countries. I'm not sure I'm willing to give up our autonomy in this regard just so we can have more products. While I think Europe would probably have better standards than the US, I don't like the idea of relying on any other countries to determine what is safe enough for Canadians to use.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 5 child comments
    •
  • [–] 7 points 1 year ago (1 child)

    We are currently more or less relying on the US on car safety standards...

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 4 points 1 year ago

    Yeah, we're pretty close. Put a stronger front bumper and a DRL module on an American car, and it's about the same. But we also aren't that different from Europe either. Build a Canadian car with a weaker roof, rear bumper, and child seat anchors, while beefing up the side impact ratings, and adding ESC, AEB, ACC features as standard and you have a European car. Maybe we can agree to take the best of all standards and agree to make them that way. Seems the best way to open things up without just arbitrarily agreeing to adopt another country's standards wholesale in an attempt to get some market share. We have enough problems with that as is.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 5 points 1 year ago (2 children)

    Most (maybe all) car seats have two methods of attachment - LATCH/LUAS system and just using the seatbelt.

    A quick Google search shows me that they use it in Europe too, but call it ISOFIX. As far as I can tell it's just three different names for the same system.

    The seat belt method should work regardless of whether the car was made for North America or EU.

    Plus, safety standards change all the time. This is just one new standard for them to follow (if it is even different at all).

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 1 year ago

    Yeah, I looked them up out of curiosity after posting. They look pretty similar. In CanUS, most LATCH seats use a lap belt with clips on either end to connect to the anchors. This lets you slip it between the upper and lower parts of the seat more easily. Looks like ISOFIX is designed so the seat latches right to the anchors, and there is a removable part of the seat that exposes the anchors. The top tether in Europe usually goes to a roof while it is usually on the bottom of the rear part of the seat in CanUS. I think the Euro implementation would likely minimize installation issues, which was the whole point of both standards. To get the lap belt tight enough is a real pain, so they get installed wrong a lot over here. Apparently there are LATCH car seats that also connect directly to the seat anchors, but I have never seen one. Seema like it would be rougher on the interior given how we hide the anchors over here, but it would probably result in fewer bad installs.

  • permalink
  • fedilink
  • source
  • parent