[–] 31 points 5 months ago (1 child)

Insurance is always a technical gamble. If you need it for something moderate to big you'll easily run up a much higher bill than 5k. Could even be enough to eat the years of savings you had.

If you had paid that 5k that year, you'd still have your savings.

  • source
  • [–] 16 points 6 months ago* (1 child)

    I agree with the general decline but man every once in a while there is an episode that I can almost compare with the golden era. (Even if others disagree).

    It's in the eye of the beholder. For me it's the pseudo realism of the feel of the storyline.

    Pseudo since I still love the monorail episode and the escalator to nowhere.

    Edit: also this chart ends early. There are several more seasons.

  • source
  • [–] 7 points 8 months ago* (7 children)

    I'm curious, what is your alternative here?

    If you say crypto, I'll say lol. If you say under your mattress I'll lmao. If you say physical gold, I'll chuckle subtly.

    In this world there aren't perfect answers. You do the best with what you're dealt.

  • source
  • [–] 1 point 8 months ago

    I'll also give credit to windows for compatibility. If I compile something on the latest Ubuntu it won't work on a slightly older one. IDK why they seem to hate static linking so much.

    I can still compile stuff for XP on Windows.

  • source
  •  

    I have this PETG; its Kingroon Blue PETG. I can't get it to print nicely no matter what I do. Been testing with benchy over and over.

    The filament is as dry as I can make it. It's been in the dryer for at least 12 hours before each print. I even have tried snipping the part of the filament not in the dryer to start from a dried state. The Relative Humidity doesn't drop anymore at this point (from 19ish).

    I've tried different temperatures from 220 to 260. I've tried different retraction lengths and speeds. I've tried with the cooling fan on/off and at a couple middling percentages. Also different speeds from 30mm/s to 45 to 60.

    I tried printing a retraction tower and it fell apart after the first level.

    The first layer prints more/less fine, then eventually it either just falls apart (most of the time) or produces something in awful quality.

    I've attached images of everything I can think of from the way it looks on the first layer, to the case where its a benchy out of a horror film, to when it just fails miserably.

    Printer Elegoo Neptune 3 Plus. .4mm nozzle (i've tried both copper and hardened steel). Besides the nozzle its stock. If I swap to PLA it prints generally fine.

    I feel like I'm missing something obvious. Everyone says dry the filament, but I can't dry it anymore 😢 .

    Thanks folks (and if you celebrate: Happy Turkey Day!)

     

    Does anyone know where I can get the latest firmware for the intel res2sv240 raid expander card? Their website seems to just not have it anymore. (Sidebar: It is obnoxious that vendors take down support info and downloads after a certain point. Why is that even a thing?)

    I'm not even really sure what the latest is at this point. Mine currently reports a

    Storcli in efi shows:

    product revision level = 0d00. ProdId = RES2SV240 VendorSpecific = x36-254.13.0.0

    No idea what that stuff means. I just know that sometimes I boot and I can see the drives behind the expander, other times I can't. In other words I can always see my LSI Megaraid card (LSI MegaRAID SAS 9285CV-8e .. on latest firmware), but can't always see the drives.

    It goes LSI Megaraid -> Intel SAS Expander -> Drives.

    I'm guessing that the firmware on the expander might have an update to fix the behavior but who knows.

    Any thoughts are appreciated. Thanks!

     

    Hey folks,

    I was printing a frame with a fresh unopened roll of PETG. I haven't seen this type of thing before. I'm guessing it's because I tried a new (to me) cura setting to move the seam to the corner.

    Besides this area, everything came out great.

    Any tips on how to get PETG and corner seams to not do this? (Or is the issue unrelated?)

     

    Every day at about 5pm he puts out holiday decorations (right now Halloween, but same idea for Christmas later in the year), then at about 9:30pm (~4.5 hours later) he brings them in the garage.

    Every.. single.. day. Same schedule.

    We're talking multiple lawn inflatables, led lights, and other misc decorations.

    I've never seen anyone else do this before (especially every day).

    Is this a normal thing for others?

    Sidebar questions (sh.itjust.works)
     

    Is there a way to always show the instance name after you swipe into the sidebar? I think now it doesn't always show the @instance.com part.

    I guess one other sidebar thing: if I'm in the a community scrolling then I swipe to get the bar, it doesn't seem to come out. Is there a setting to make it so I can swipe to go back then swipe to get the sidebar?

    Thanks folks!

     

    Link: https://www.walmart.com/ip/XPG-CYBERCORE-ATX-Modular-PSU-1000W-80-Plus-Platinum-26-Connectors-Intex-ATX-12V/724286138

    PC Part Picker Link: https://pcpartpicker.com/product/rtD7YJ/adata-xpg-cybercore-1000-w-80-platinum-certified-fully-modular-atx-power-supply-cybercore1000-bkcus

    .. why is this PSU so cheap? It's on at least one tier list as being A+ rated. It's 80+ Platinum. No idea if it has the latest connector for Nvidia, but I don't really personally need or care about that.

    Sold and shipped by walmart.com, so should be a legit seller. Has a 10 year warranty. Returnable in store. What am I missing? lol

    (I acknowledge there are some bad reviews.. but still sold and shipped by walmart. Maybe a bad batch?.. but come on that price still)

    Why is this so cheap?

    view more: next ›