top 91 comments

sorted by: hot top controversial new old
[–] 226 points 1 year ago (30 children)

Uhh, because of the heat of the raspberry pi & camera behind there

  • source
  • hideshow 30 child comments
  • [–] 9 points 1 year ago (17 children)

    Suppose you were in this situation and suspected something. I’d imagine the space behind it would be totally dark, so what would be a safe way to check if there’s a gap in between without breaking the glass?

  • source
  • parent
  • hideshow 17 child comments
  • [–] 26 points 1 year ago (3 children)

    there are no "one-way" mirrors. You just need to make your side darker than the other side (there's a reason the observation side of a two-way mirror is never brightly lit, but the interrogation room is)

    Tldr: put your face right up against it and use your hands to block out as much light as you can

  • source
  • parent
  • hideshow 3 child comments
  • [–] -1 points 1 year ago (2 children)

    there are no “one-way” mirrors. You just need to make your side darker than the other side

    15 upvotes? Really? Mirrors are painted on the back with opaque paint.

    Are we cross posting this to a flat earth science forum?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 8 points 1 year ago* (last edited 1 year ago) (12 children)

    I read a long time ago that putting something flat against the mirror will show you. I think if the mirror is legit you’ll see the reflection directly on the surface, if it’s two way the reflection will look like it’s inside the glass.

    But I’ve never had the chance to actually test that, so take it with a grain of salt.

    Edit: Turns out this is incorrect; thanks to everyone for educating me!

  • source
  • parent
  • hideshow 12 child comments
  • [–] 23 points 1 year ago (6 children)

    You want there to appear a "space" between your fingertip and the mirror, if touching it directly. If there's no space, then say cheese.

  • source
  • parent
  • hideshow 6 child comments
  • [–] 5 points 1 year ago (3 children)

    If you’re touching, someone’s watching.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 15 points 1 year ago* (1 child)

    This is ancient advice for two-way mirrors, IIRC nowadays even legit mirrors can reflect directly from the front instead of the back. In this age of spy cameras this is mostly irrelevant.

    Another tip was shining a bright light to illuminate the supposedly dark room on the other side, which again, would be way more expensive than a smoke detector spy camera.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 5 points 1 year ago

    Yes, darkening your room and then pushing a bright light up against the one-way, taking care to not have it leak into your room, should make the other room brighter so you can see it.

    Not that this is a one-way mirror anyway.

  • source
  • parent
  • [–] 15 points 1 year ago (1 child)

    It would be the other way around, if at all.

    "First-surface" mirrors where the reflective layer is on the front of the glass are quite fragile, so wouldn't typically used for residential applications (you'd remove the reflective coating by cleaning it).

    A regular mirror has the reflective surface on the back of the glass (which is then is further coated with a protective paint), leading to the effect you describe.

    I don't however know enough to say one way or the other whether a surveillance mirror would becessarily be a first-surface mirror.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 5 points 1 year ago

    think if the mirror is legit you’ll see the reflection directly on the surface, if it’s two way the reflection will look like it’s inside the glass.

    scientific use mirrors are front mirrors, the metal is deposited on the outer surface. They are delicate and difficult to clean.

    Every household mirror is rear coated, and then painted to protect the metal from oxidation.

  • source
  • parent
  • [–] 6 points 1 year ago (8 children)

    Ahh yes, because that would produce exactly square shaped heat.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 7 points 1 year ago (3 children)

    It a very big Pi. Might even be a Tau.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 52 points 1 year ago

    It’s heated.

  • source
  • [–] 47 points 1 year ago (3 children)

    There's a ghost in your house that's trying to tell you "rectangle", but it's illiterate.

    Try to figure out what "rectangle" means.

  • source
  • hideshow 3 child comments
  • [–] 29 points 1 year ago (2 children)

    Nah, just means that the mirror can't render the Unicode character that the ghost has sent.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 37 points 1 year ago* (last edited 1 year ago)

    Don't believe any of the other comments, this is clearly a one-way mirror with a camera inside. That conspiracy theory you've been thinking about a lot lately is true, and even worse they know you are on to them. Remember that creak in the floorboards you dismissed as the house settling? Footsteps. The way your coffee mug was turned slightly counterclockwise this morning? Intentional. They watch you when you sleep, and know how much time you spend looking at your phone.

    Or it's what the top comment said. Sleep tight!

  • source
  • [–] 37 points 1 year ago (14 children)

    There are coatings /sprays for this

  • source
  • hideshow 14 child comments
  • [–] 62 points 1 year ago (2 children)

    I think in this particular case it might be an integrated heating element like this: https://clearmirror.com/products/shower-clearmirror

    They're popular in shower rooms in Japan.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 4 points 1 year ago (8 children)

    You can also just rub some shaving cream on it and wipe it off.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 5 points 1 year ago (7 children)
  • [–] 8 points 1 year ago (6 children)

    Or rain-x anti-fog or similar coating to achieve the same.

  • source
  • parent
  • hideshow 6 child comments
  • [–] 3 points 1 year ago (4 children)

    Oh high neighbors! No, no, I'm not shaving the car again! This is so it doesn't fog!

  • source
  • parent
  • hideshow 4 child comments
  • [–] 4 points 1 year ago* (last edited 1 year ago) (3 children)

    This reminds me of something I heard on the radio a million years ago:

    https://www.npr.org/2018/09/29/652927798/-1839-the-chia-pontiac

    Here's Click and Clack from the Car Talk radio show

    Putting this show on is so bittersweet. I miss this from my upbringing and these two guys were so great; I was genuinely sad when I heard one of them had passed

    I'll try to get the timestamp for the relevant part, but the title of the episode hopefully gives a hint and it's worth listening to it in the entirety anyways

    Edit: alright, the timestamp is 31:50!

    Edit 2: I forgot to include who it is

  • source
  • parent
  • hideshow 3 child comments
  • [–] 2 points 1 year ago (2 children)

    I just woke up. Is that click and clack the tappet brothers?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 3 points 1 year ago (1 child)

    Yes!!! I love those guys

    I grew up with my family listening to NPR so some of my fondest memories are getting up to my parents or grandparents making breakfast with that on, or any other of their wonderful shows

  • source
  • parent
  • hideshow 1 child comment
  • [–] 28 points 1 year ago (3 children)

    I had this happen in a hotel, and being curious I removed the mirror, and yes there was a hole in the wall behind it, no there wasn't a camera there. It was just were they had ran the wiring for the lights on the mirror.

    It would make sense that it serves like an access hatch to a terminal block that feeds the whole room. It's simple, costs nothing, is easy to get to (compared to having it sealed in the wall), protected from splashing and prying guests, and close to where you want most lights and outlets.

  • source
  • hideshow 3 child comments
  • [–] 38 points 1 year ago (2 children)

    being curious I removed the mirror
    protected from [...] prying guests,

    blobcat, googly, think

  • source
  • parent
  • hideshow 2 child comments
  • [–] 32 points 1 year ago (3 children)

    This comments section feels like schizophrenia.

  • source
  • hideshow 3 child comments
  • [–] 31 points 1 year ago* (last edited 1 year ago) (5 children)

    For anyone who wants to achieve the same effect take a dry bar of soap and rub some into an area of a mirror in whatever shape you like (circle, square etc). Then buff it out with a dry soft towel or cloth until you can no longer see the soap. Next time you take a shower that part of the mirror won't be fogged up. Reapply soap and buff out every couple weeks or so if you want it to stay that way.

  • source
  • hideshow 5 child comments
  • [–] 2 points 1 year ago

    Yes for anybody wearing goggles or glasses outside if you rub soap like dish soap and circles on the lenses it will prevents them from fogging up and will not streak because the circles thing. Vinegar sort of works too but doesn't stick on as well as soap.

  • source
  • parent
  • [–] 14 points 1 year ago

    Maybe somebody's stashing delicious freshly baked goods back there?

  • source
  • [–] 20 points 1 year ago (2 children)

    These are such a good idea. It works by having a mirror behind the heater which prevents the reflection.

  • source
  • hideshow 2 child comments
  • [–] 13 points 1 year ago (12 children)

    It's a two-way mirror and there's a camera on the other side recording you 24/7.

  • source
  • hideshow 12 child comments
  • [–] 8 points 1 year ago (6 children)

    Isn’t a two-way mirror just a window? I think you meant “one way mirror.”

  • source
  • parent
  • hideshow 6 child comments
  • [–] 31 points 1 year ago (5 children)

    No. English is just hella stupid. 🤣

    A one-way mirror, also called two-way mirror...

    https://en.m.wikipedia.org/wiki/One-way_mirror

  • source
  • parent
  • hideshow 5 child comments
  • [–] 11 points 1 year ago (2 children)

    How many ways is a normal mirror, then? Do we call it a "no way mirror"?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 0 points 1 year ago

    Well I mean dictionaries. Kind of like how webster defines literally with

    Definition 1: In a literal manner such as ....

    Definition 2: used in an exaggerated way to emphasize a statement or description that is not literally true or possible.

  • source
  • parent
  • [–] 3 points 1 year ago (4 children)

    jokes on them, I'm already pornhub famous.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 10 points 1 year ago (1 child)

    Just posting to say I was here when everyone replied with "These are such a good idea. It works by having a heater behind the mirror which prevents the condensation."

  • source
  • hideshow 1 child comment
  • [–] 4 points 1 year ago

    It's heated.

  • source
  • [–] 7 points 1 year ago

    Your part of a TV show!

  • source
  • [–] 15 points 1 year ago* (last edited 1 year ago) (3 children)

    These are such a good idea. It works by having a heater behind the mirror which prevents the condensation.

    Ps. Excuse the multiple posts. fedia.io was having a moment. I’ve deleted them now

  • source
  • hideshow 3 child comments
  • [–] 5 points 1 year ago

    that’s the two-way section

  • source
  • load more comments
    view more: next ›