Spent all weekend assembling this Core One. It probably took 14 hours in total. 12 hours to build and 2 hours to troubleshoot issues. Broke some parts made some mistakes but I finished the build.

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 8 points 1 year ago (12 children)

I broke one of the tension adjustment pulley thing. I loosened the belts to calibrate the y axis. When I was tightening the tension belt I absentmindedly tightened the bolt all the way and then some which broke something. Not sure what but turning that bolt now no longer moves the tension belt pulley. I can see the screw spinning so it's not a stripped screw.

I'm going to look into what actually broke in a few days. Kind of exhausted from assembling the thing. As a result of this the top belt is a bit tight (its like 105HZ) but the prints come out ok-ish so I'm not in a rush to fix it.

  • source
  • parent
  • hideshow 12 child comments
  • [–] 13 points 1 year ago* (6 children)

    Obviously, your next print is a replacement tension adjustment pulley thing, as is tradition.

  • source
  • parent
  • hideshow 6 child comments
  • [–] [S] 1 point 1 year ago* (5 children)

    I have some PETG filament on the way which is another reason why I haven't looked at the issue yet. All I have is PLA at the moment.

  • source
  • parent
  • hideshow 5 child comments
  • [–] 5 points 1 year ago (4 children)

    I don't know how critical this part is but if it sees any kind of load, re-pint in abs/ASA or better. Petg and PLA creep under consent load.

  • source
  • parent
  • hideshow 4 child comments
  • [–] [S] 1 point 1 year ago (2 children)

    It's pretty critical. It holds one of the pulleys that the belt is attached to. The belt moves the print head in the x/y axis. I actually did print the part in PETG. Hopefully it just works and I won't have to touch it for a year :D

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 1 year ago (1 child)

    You will definitely want to reprint it in something else while the printer is working. Otherwise you're going to see dimensional accuracy issues crop up over time that require you to keep adjusting the belts.

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 1 point 1 year ago*

    I can't really print it in a better material until I get ventilation figured out which might not be until spring of next year. I did order some parts from Prusa in case the part I printed fails so worst case I have to swap it out but so far it works very well :D

    Gotta give it to them for making the machine so repairable. Even if the design here is a bit questionable.

  • source
  • parent
  • [–] 6 points 1 year ago (4 children)

    On the chance that it helps you at all, I broke the same part.

    For some reason Prusa loves using those slim squarenuts that tend to bind up due to how few threads they have. Chances are the nut in the pully bound up and stripped out the plastic so now it's just spinning with the bolt.

    There's a few community made models on printables that replace the nut with threaded inserts. The part should be printed in pc-cf however, and that's frequently out of stock it seems.

  • source
  • parent
  • hideshow 4 child comments
  • [–] [S] 1 point 1 year ago (3 children)

    Ah I see. I'm guessing I need a hardened nozzle since it's CF. :/

  • source
  • parent
  • hideshow 3 child comments
  • [–] 4 points 1 year ago (2 children)

    A hardened nozzle for sure.

    You got this repair, you built this thing remember? You are the master of your printer.

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 2 points 1 year ago

    I think I'm just going to buy the part from Prusa.

    • They appear to be out of stock for PC - CF
    • PC releases harmful fumes and needs to be ventilated. I'm going to find a venting solution eventually but not now.
    • The part is way cheaper than a spool of the filament, I can get a few in case they break. I know I can print a lot of parts with that same filament but I don't really have an interest in printing with PC - CF.
  • source
  • parent
  • [–] [S] 1 point 1 year ago

    Actually ended up printing the part with PETG. It worked and the issue is fixed (for now). Removing the broken part was a huge pain. I ended up using a drill and just drilling around where the nut is until I could fit tweezers onto the nut then I used the tweezers to keep the nut from moving and a screwdriver to loosen the nut until the part came out. All-in-all it was pretty time consuming and annoying. Hope I won't have to do that again for a while.

  • source
  • parent