[–] [S] 1 point 1 week ago

Thanks for the advice. It’s a bit much for me to store blades outside the bathroom. I wouldn’t mind doing that on in mounted blades, but it’s a bridge too far on mounted ones. I think I’ll just have to pay attention to the kind of steel.

  • source
  • parent
  • context
  •  

    Hey all.

    I had my routine down to the point taking it for granted. I had settled into brush and bar soap ( mostly Irish spring) using persona USA made blades.

    It was comfortable for me, blades lasted about a week each, no nicks or cuts for years now.

    I went to reorder the blades and they were now 2x what I last paid.

    I ordered a box of Indian made astra blades and it was like I was new at shaving again. They only last a shave or 2 with water.

    Does anyone have a hidden gem cheap blade?

    I have made the astra work for me using an alcohol gel instead of soap but I wasn’t looking to be that hard on my skin daily.

    Does anyone here have a good shave with astra blades? What’s your routine?

    [–] 2 points 1 week ago

    Well, not likely a breakthrough. As we are seeing in the Russian numbers taking territories incurs more losses than defending territory. Russia is still advancing though making no significant gains.

    Even with the amazing combined arms Ukraine has moving from defensive positions to offensive ones you need to outnumber the now defenders. It’s going to be hard for Ukraine to have the numerical advantage in anything more that small specific pockets of the battlefield.

    A big breakthrough just isn’t in the cards until there are 100’s of thousands of robots or a country steps up with troops to support Ukraine.

  • source
  • parent
  • context
  • [–] 7 points 2 weeks ago

    I misread this as roasted potatoes and chill and thing it was a lord of the rings meme.

    I go though the same step to get a crisp on my potatoes and have gone as far as tossing a tsp of cornstarch with them for a really nice shell. Make sure there is a paste like slurry no matter if it’s the potato starch or other.

    I also use kosher style salt or granulated soup mix to get the starch spread out. Granulated onion also works, fried onion gave me disappointment compared to the other methods

  • source
  • [–] 3 points 3 weeks ago

    I started in revised just after legends . Still I remember my local shop stocking Arabian packs. I saw someone buying packs one after another to get a specific card.

    One of my fav combos was Ali from Cairo and spectral cloak. Ali and lich was fun as well.

    Those first 3 expansions were something special.

  • source
  • parent
  • context
  • [–] 4 points 3 weeks ago (2 children)

    There were 2 printings of this card. The 1 in the casting cost is what looked different. I really liked the art from Arabian Nights. I collected almost all of it at one point.

  • source
  • [–] 7 points 3 weeks ago (3 children)

    There is no ‘deal’

    There are some extremely active and vocal users on .ml that have a specific view point that they feel is extremely important.

    You will see that viewpoint expressed not just on political posts, but in the comments of seemingly unrelated topics.

    It seems that .ml was defederated from world to keep some separation of that view point and other topics.

    You are still fully free to join any instance you want. You can even find community here to post that content if you wish, but there is a more active and vibrant community on .ml for that content.

  • source
  • [–] 5 points 3 weeks ago (2 children)

    That is a bit crazy if you are in the US. There is no ‘business Id’ just say you are a sole proprietorship, meaning the business is just you, no corporation structure or anything like that and you are dba, doing business as, and your name.

    That is how you technically describe yourself when you are a business when you are a person.

    Your tax id number would just be your social security number.

    It’s legal to transact business as a person.

  • source
  • [–] 3 points 1 month ago*

    Having preferences is one of the few joys that we can have left in this world.

    Where I live most coffee cost the same to have it made, about $5 a cup for McDonald’s to the hyper local sourced from speciality farm brew.

    The one you like most is best. people trying to share their favorite with you is a way of sharing joy.

    Some people can’t share in that. Just like some people are partially deaf, some people have muted taste. They can hear something, but not enough to enjoy it. Just because someone can’t tell one piece of music from the next doesn’t mean all music is the same.

    That said I think you opinion is unpopular. Most people have favorites when it comes to food and drink.

  • source
  •  

    This was brought on by the Sony news that all disk based distribution will stop.

    At what point do I have be concerned that a cart or disk I buy won’t work on my system without a mandatory download?

    The ps3 seem pretty clear but I seem to recall a game or two that did require a download, or system update, to play.

    How many ps4/ps5 games would I be able to play without a server connection?

    What about switch 1 /2 games?

    Is there a website that tracks this or a way to tell?

     

    I’m not looking to homeschool my kids, but I do I want to create some effective age (8 -11 year olds) appropriate lessons and teaching materials for some summer learning.

    Is there a community that sort of does that?

    A separate and related question How can I do home tutoring for subjects they are weak in?

     

    Thanks everyone who chimed into my first help request.

    I picked up a set of winsor newton acrylic paint and a paint pen. That was definitely the right advice.

    The red could go straight onto the board, but all the other colors needed to be backed by white.

    Does anyone have good tips on mixing skin colors for paints? Right now all of these on the board were solid colors ,

     

    I’m an absolute beginner that decided to make a comic character poster for my kids. I found a nice tutorial and was able to sketch a nice 24,36” picture of the character Luffy from the cartoon they watch called one piece.

    It’s all pencil outlines and it cleaned up pretty nicely. I unfortunately only had fluorescent pink poster board.

    I’d like to paint the character in, but I’m afraid the paint won’t cover the pink and it would look pretty bad.

    There are only a few colors in the character and it’s line art.

    At any rate I would want a paint marker for the black lines. Would the oil based sharpie paint market be a good choice? Does anyone have an overall recommendation?

    Here is the drawing tutorial. I followed. https://www.drawingtutorials101.com/how-to-draw-monkey-d--luffy-full-body-from-one-piece

    Here is the color palette

    https://www.anime-colors.com/one-piece-series/monkey-d-luffy

    It will never be fine art, but I want to make something nice for my kids.(ideally before Easter)

    Thanks for any beginner friendly advice

     

    I’ve recapped an Apple 2e and started playing what was one of my first games, the bards tale.

    I distinctly recall I beat the game, but I can hardly get 1/2 through the first floor of the first dungeon.

    I started grinding near a temple where I can heal my party but the rng encounters make a very hard battle every 4-5 battles that wipe party members.

    Reviving a party member cost 900 gold a level so if I do get them leveled up to 2 or 3 it’s too expensive to get a raise.

    Anyone else remember this game?

     

    I haven’t thought about it in a while but the premise of the article rings true. Desktops are overall disposable. Gpu generations are only really significant with new cpu generations. CPUs are the same with real performance needed a new chipset and motherboard. At that point you are replacing the whole system.

    Is there a platform that challenges that trend?

    Edit Good points were made. There is a lot to disagree with in the article, especially when focused on gaming.

    Storage For the love of your data : storage is a WEAR component. Especially with HDD. Up until recently storage was so cheap it was crazy not to get new drives every few years.

    Power Supplies Just because the computer still boots doesn't mean the power supply is still good. A PSU will continue to shove power into your system long past the ability to provide clean power. Scope and test an older PSU before you put it on a new build.

     

    I picked up some old CRTs from an ewaste find and had real trouble getting them to work around 2022.

    I found a guy in southern California that can fix them but he was 2+ hours away and the monitors weighted around 100 pounds.

    Just a few weeks ago I finally made the drive and got the first one repaired. It needed a few small parts and a service, but had a new picture tube installed.

    It was a Sony BVM-D24E1WU.

    The other monitor takes about 10 minutes to warm up. Pat the repair guy told me it would only support sd resolutions (480i) I didn't take it for repair since I didn't know what I would hook up to a SD only monitor. That one was a Sony BVM-20F1U.

    Doing some quick searches it seems I got super lucky in the model both displays they were, as well as finding someone who knows how to fix them.

    It seems that I should do some retro gaming. My retro system is a PS3 . Is there anything that just wows on these displays?

    Does anyone have an HDMI to sdi recommendation? How do I de-embed the audio?

    Update:

    I realized that my Taiko Drum Master machine is a PS2. I tried hooking it up the the 20" monitor and discovered the BVM does not have a composite input, component only. I'll get a component cable since I can't imagine I'd get an input card for less.

    Is there anything to look out for in PS2/PS3 component cables? I had a Sony set I got by mistake and can't seem to find them now that I need them.

     

    I wasn't sure if this was the best place to post this. A series of events happened and I recently changed up my home network.

    One of the larger changes I made was to add a Unifi Cloud gateway gateway ultra.

    Right away my biggest challenge is that it does not accurately list all of the client devices that it has given a DHCP lease to.

    Has anyone else run into this issue?

    I have some IP based security cameras that I have only been able to locate before by looking at my ISP's dhcp lease list and find the IP.

    So right now I have cameras on my network and I have to brute force lookup the IP of them to figure out where they are.

    A more minor annoyance is that the network topology map is wrong and that ubiquity switches are not being mapped.

    view more: next ›