you are viewing a single comment's thread
view the rest of the comments
[–] 34 points 1 year ago (17 children)

Seriously though.... This will get better gaming performance won't it?

This seems dumb, but I'm struggling to think of why that would be the case.

  • source
  • hideshow 17 child comments
  • [–] 52 points 1 year ago (8 children)

    You need a radiator, otherwise the glass of water will eventually be the same temp as the phone.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 12 points 1 year ago (2 children)

    not quite, the glass of water itself acts as a radiator since it has a significantly larger surface area than the phone, and water evaporation cools it down ever so slightly

    even at equilibrium it'll probably keep the phone a degree or two colder, i'd wager.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 26 points 1 year ago (7 children)

    Usually those water resistant seals are just a tiny bit of adhesive gunk like so (looks better before removal obviously). Eventually it may just break down. Also it isn't waterproof, so holes like the charging port, speaker, microphone, stylus, you don't want submerged for long. Might do better flipped upside down, but there is usually a speaker and mic at the top as well.

  • source
  • parent
  • hideshow 7 child comments
  • [–] 14 points 1 year ago (5 children)

    It is flipped, isn't it? I see a cable coming out and that's usually the bottom.

    I'm wondering if the phone in a ziplock bag would work as well. thin plastic but an extra layer of security and a trivial heat insulator. But none of the shock factor lol

  • source
  • parent
  • hideshow 5 child comments
  • [–] 3 points 1 year ago (1 child)

    I feel like the problem with that is that you can't get all the air out. air doesn't conduct heat well at all, you would need airflow which you would get were the phone in the open. Maybe keep the ziplock bag open. I would try foil, for better heat conduction than plastic but I'm also afraid of foil reflecting heat radiation. I am in no way knowledgeable in this but i am hoping someone who is could provide some insight.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 6 points 1 year ago

    If we’re gonna talk about actual implementation, you can probably stick a few simple waterblocks on both of the phone’s sides with some thermal pads and have water flowing through everything. Maybe two CPU sized blocks on each side. Not the fancy stuff, the questionable cheap ones.

    I don’t even think you need a radiator, a phone will only dissipate so much heat. A loop sucking water out of a metal bucket and dumping it back in will probably radiate enough heat to keep everything relatively cool. Unless we’re doing 25W phone processors now.

  • source
  • parent