all 12 comments

sorted by: hot top controversial new old
[–] 7 points 7 months ago

Urutau is not based on the FGC9. Literally the only printed part they have in common is the ejector. Likewise, Rogue and Rebel may be "inspired" by FGC9, but they're from-scratch designs.

Urutau is the easiest full DIY build of those you listed. The Decker is even easier, but it's 380ACP instead of 9mm (a 9mm version is in beta).

For 22LR your best bet is something specifically designed for it. The Yippee Ki Yay or EZ22 are worth a look.

  • source
  • [–] 6 points 7 months ago (3 children)

    The rebel and rogue 9 aren't really based off the fgc9. a slightly more accurate statement is they stand on the shoulders of the fgc9 as a completely new iteration of the same goal with attention to lessons learned by previous designers.

    Are you just interested in building an fgc9 because it's iconic or you're not in the US? If you're in the US and you just wanna try the hobby id recommend a Mac upper build like Mac Daddy or DB alloy that's enough to feel the accomplishment of a build without being so difficult to get a functional firearm you never wanna build anything else again. This stress will compound if have to wait all week to go to your favorite trash pile just to test your last tweak. If you're really confident then the ump build will provide the extra feeling if accomplishment with too much extra difficulty and it's a great shooting setup provided you get the barrel retainer right.

  • source
  • hideshow 3 child comments
  • [+] [S] 3 points 7 months ago (3 children)
  • [–] 2 points 7 months ago (2 children)

    That makes sense. If .22 ram sets aren't hard to come by id make a pen15 and call it a day. One of those should be much easier to make,keep,shoot and if it were to come down to it explain away as a toy or fireworks launcher as opposed to a firearm. A solid 15mm whistle round will penetrate 1/4 inch plywood at ten feet with the green ramset.

  • source
  • parent
  • hideshow 2 child comments
  • [+] [S] 2 points 7 months ago (2 children)
  • [–] 1 point 7 months ago (1 child)

    For the pen15 the only additional material required that wouldn't be found in a cluttered garage/shed is the metal tubing you cut into a sleeve that acts as the chamber for the ramset. Which tbh you're gonna be buying this tube type for for any other .22 project to substitute for a barrel liner anyway so think of it as your admission ticket to the hobby given you'll have leftovers

  • source
  • parent
  • hideshow 1 child comment
  • [+] [S] 1 point 7 months ago (1 child)
  • I've built both ignoring the ability to load ramset by break action on the pd they're virtually the same other then the pen15 has two firing style options. I'd start with the no trigger variation of the pen 15 then work up to the PD when you are comfortable with your striker shaping. When I built the triggered version of the pen 15 it took two attempts before I was satisfied with how secure it was from bumps and drops when cocked from a lack of attention to mating surfaces

  • source
  • parent
  • load more comments (-1 replies)
  • load more comments (-1 replies)
  • load more comments (-1 replies)
    [–] 6 points 7 months ago

    If you're wanting to build a fully DIY 9mm gun in 2026, I would recommend either the Urutau or the Rogue / Rebel. The Rogue / Rebel works better but is more complicated to fully DIY, the Urutau I have found more difficult to get running right but has an easier build process.

    As others have said, if you're in the US and just want to "build a gun", you may want to start with a Mac build or something a little easier first. Although for what it's worth, if you use a parts kit for the Rogue / Rebel, I think it's as easy as a Mac build. Actually I think the Rogue / Rebel is easier than the Urutau, if you're using a parts kit.

  • source
  • [–] 4 points 7 months ago (1 child)

    I miss MOD 9, in this day nobody talk about it .I so hype when it release at fcg9 arc. good old day.

  • source
  • hideshow 1 child comment
  • Ngl, I have a semi auto uzi barrel and I'm considering taking the FGC9 and trying to make a blow-forward abomination

  • source