This is PETG, one was left out in about 40% humidity the other was dried to about 20%

you are viewing a single comment's thread
view the rest of the comments
[–] 2 points 1 year ago (6 children)

Will someone divulge their drying technique pls.

  • source
  • hideshow 6 child comments
  • [–] [S] 2 points 1 year ago

    Mine is just Polydryer. Keep the box low humidity keep the filament low humidity.

    Need more testing to see how well this works though since swapping filament in these boxes is inefficient and the beads quickly get used before you need to reset them.

    Only do this if you have money to burn, or you are doing 3d printing as a business and at scale

  • source
  • parent
  • [–] 2 points 1 year ago

    I have a dedicated box with a heated carpet for reptiles that can regulate temp between 25-60 C, two 12v coolers and two boxes with silicagel, this one runs constantly. If there is a need to dry multiple spools - oven at 50 C for 4-5 hours. That's my setup for petg.

  • source
  • parent
  • [–] 1 point 1 year ago

    Place the spool on the bed set to 60-80°C, then put an empty filament box that's missing the bottom side (when flat) on top of it. Place silica, make some holes on the top side. Some youtuber made tests and this method lands pretty nicely in between low-end and high-end dedicated dryers

  • source
  • parent