1
 
 

So I wanted to try Heroic Game Launcher, to see how well it works with GOG games. So I bought Tainted grail from GOG at half the price it was at Steam to try it out. 😋

  1. Purchasing was of course easy as always, no sweat except it gave me a warning that Tainted Grail isn't compatible with my Linux OS. Installing Heroic Game launcher was also easy because it's in the repositories of my distro. So off to a good start. 👍

  2. But then it went a bit sideways, because the game launcher absolutely refused to log into my GOG account, I even tried logging out and in again to check if I was using the correct info.
    Well that sucked.

  3. So I tried the galaxy download/install which would be very convenient if it worked. But apparently it didn't, it kept working on it for an hour, but there was no visible window for the install progress so I ended giving up on that.

  4. But luckily GOG is without DRM and we can download the game installation files. So on to that. There were the install files and lots and lots of patches, so I downloaded everything. And when finished I started the installer exe that runs a GOG installer that luckily works in wine. So I fainally got the game installed. 🎉

  5. On to launching the game, but for some reason the installer had not made a menu item for the game, so I had to find it in the hidden wine folder under GOG games, so finally GAME LAUNCH!! 😀😀

(Except later I found it had made the menu item, it's just under wine and not under games.)

  1. Now it gets exciting ProtonDB state the game to have platinum ranking, so I figured there would be a good chance for it to fine from here. But no, rendering shader were extremely slow, and after 5 minutes it crashed. Goddam that was unexpected. ⁉️
    Ok I reboot my system, and try again with the plan of bypassing the pre rendering. The game did that by itself for some reason, and I was presented with an introduction and I could start a new game.

  2. But already when being introduced to making my character it was obvious the graphics 3D rendering didn't work at all, lots of missing textures and flickering where the textures should have been. I tried to start the game with my weird character anyway. An was presented with unplayable graphics, and then it crashed. 😭

  3. Then I remembered that when I was in Heroic Game Launcher there was an option to add a game. So I figured let's try that. Now that I have a complete installation. So Heroic Game Launcher got another chance, and adding the game was easy peasy, it defaulted to launch with GE Proton 10-34, I'm not even sure I had that installed, and it also made an icon with one of the well known pictures for the game adverts. Wow this is pretty cool. 👍😎

  4. Now to see if this works, I have no idea how the game launcher figured out what it did, but I launched the game from the Heroic Game Launcher: Aaaaannnnddd
    Everything was perfect 🎉 🎉 🎉 Played the game for 4 hours straight before I had to go to bed, no problems detected whatsoever!!!

So this is definitely not the last time I buy on GOG, it would be cool if the Heroic Game Launcher could log into GOG, but even without that, it is absolutely stellar.

HUGE SUCCESS IMO.

2
3
4
5
 
 

I was a bit sad getting my steam controller, and it not even working outside steam on linux (before kernel 7.3 apparently).

So I decided to spend the night (vibe) coding a solution that integrates better into a linux desktop based on wayland (many supported, not gnome sorry...).

Essentially provides what steam input provides while steam is started, but compared to steam it actually works well under wayland (e.g. pointer / mouse input in desktop mode working).

  • provides emulated controllers so any games can actually use the steam controller
  • switchable desktop / gamepad mode via long press of menu button
  • on screen hud, keyboard, settings
  • button remapping
  • changing what controller to emulate
  • seamless handover to steam input when steam starts. -> this is pretty nifty, because steam accesses some features of the controller no other app does yet, there is a special mode, where puckd hands over full control to steam automatically. You can dynamically switch back to giving puckd control by pressing + ≡ for ~half a second.
  • programs that actually can use the controller "natively" will get a pass trough device that has the full features set. Similar to steam pass trough, but it still allows switching between desktop and gamepad mode, open on screen keyboard without the steam / puckd switchover
  • presets
  • allow automatic preset switching based on application having focus on your desktop
6
 
 

sorry if this is the wrong place to post this.

Recently i switched to steam os on my pc, installed battle net and everything went smoothly. I played in beta and i dont have issue but when i play on live my ping would shoot to 1000 to 4000. and it only smooth on the first 10 minutes or so. I dont know what else i should do so any help is appreciated.

things i tried

restarting.

Im using starlink so i tried to relocate the dish.

turning off firewall in my asus modem

turning off firewall in my pc

turning on and off qos

turning on and off ipv6

changing poton

I tried several ping checker and in my browser everything seem normal


For those who come after,

if youre here and you prob has the same issue, the fix for me was using a vpn. its not permanent fix but it works for me

7
 
 

so I tried for the longest time to game on my 12-16 year old system with varying results. the constant issue was with Far Cry 5 - whatever I tried, it was always laggy, choppy, sometimes it's 30 fps, sometimes it's 50, altering resolutions, details, nothing worked or at least, no consistent results. my specs are above the recommended ones (i5-4670K, 16 GB, RX 580 8 GB, Fedora 44, Lutris, Wine 11.x) yet it always ran like ass.

so I read somewhere that the new NTSYNC is da bomb for CPU heavy games, which this one is, and in lieu of any succinct tutorial, I stumbled around and did the following:

  1. sudo dnf install ntsync-autoload
  2. sudo modprobe ntsync
  3. turned off Esync and Fsync in Lutris

ran it with MANGOHUD_CONFIG=full to verify, and verily, there it is, says NTSYNC.

the game - forgetaboutit, butter smooth, constant 60 fps, no issues, no stutters, no frame gen spikes, this is like a new machine!

so it's possible this isn't the proper way to do it, but if you got issues, doesn't hurt to try.

8
9
 
 

Overview page: https://www.gog.com/en/anniversary

Direct sign up for Galaxy Linux beta: https://www.smartsurvey.co.uk/t/YEF5EV/

10
 
 

I am building a game using the Super Tux assets. It is NOT an asset flip, game has a totally different main concept, new mechanics, 4 new boss fights, built with a different engine.

When I first started building the game, it was supposed to be a FOSS game. But after spending a ton of sleepless nights working on it, I would like to get compensated.

Donations will probably not cut it, judging by what most FOSS games go through. I'm a huge fan of FOSS, so it does feel wrong releasing a commercial games where 80% of the assets are from volunteer work.

On the other hand, the license approves of this. If they have an issue with it, they would have chosen another license, correct?

What do you think?

11
 
 

Do native source ports exist? Or should I go with running the game using wine?

12
13
14
 
 

Patch notes in spoiler

spoilerChanges since GE-Proton11-11.

Component Updates

  • Wine: Valve bleeding-edge 2026-10-31, plus newer bleeding-edge commits:

  • XInput now rescans controllers only when a device could have changed. This replaces the Far Cry 4 and Witcher 3 rescan hacks.

  • The thread pool worker timeout is now 60 seconds.

  • Voice Capture DSP (mfwmaaec) supports audio capture.

  • HID input reports are cut to their declared length.

  • The Radeon Software version is now set in the registry.

  • nvapi is disabled for every game when the NVIDIA driver isn't loaded.

  • Xalia was updated to 0.5.0.1.

  • wineopenxr was updated to OpenXR 1.1.65, adds initial support for D3D-consumed swapchains and fixes extension string lengths.

  • lsteamclient: better path resolution for ISteamApps::GetFileDetails(), and matchmaking request handles are now validated.

  • DXVK: v3.1.1-174:

  • Command submission throttling and memory eviction rework.

  • Present timing fixes, including an NVIDIA fence workaround.

  • D3D9 YUV conversion fix and D3D11 ForcedSampleCount fix.

  • D7VK: large DirectDraw/D3D7 and older rework:

  • Viewport, material and texture objects are shared between interface versions.

  • Gamma, display mode and present handling fixes.

  • New legacy aspect-ratio and overlay options.

  • VKD3D-Proton: v3.1:

  • Arc Raiders wave32 workaround.

  • UE4 ray tracing glitch fix on AMD.

  • Memory allocation fallback across memory types.

  • Fence event and present timing fixes.

  • VKD3D: shader compiler updates (HLSL namespaces, .mips[][], d3dbc parsing).

  • DXVK-NVAPI: v0.9.3. Available video memory now matches nvidia-smi.

  • FEX: FEX-2610-116. Adds AVX-NE-CONVERT and x87 FIP, plus decoder fixes.

  • DXVK, D7VK and VKD3D-Proton built from a GE-patched tree now carry -GE-Proton(dirty) in their version string. This lets upstream developers see in bug reports that the build is modified.

Controllers

  • Final Fantasy VII Rebirth, Horizon Forbidden West and Horizon Zero Dawn Remastered: Duariggers now work together over USB. These games now default toPROTON_SONY_WINDOWS_DEVICE_NAMES=1 (#860).

  • Armored Core VI: controllers now work through the Steam Input fallback with Steam Inpute received no input.

  • The automatic Sony Steam Input fallback is kept when Steam Input is disabled for one game but enabled globally for PlayStation controllers.

  • Added PROTON_STEAM_INPUT_XBOX_PROMPTS. It reports the Steam Deck and Steam Controllermes show controller prompts instead of keyboard prompts. Enabled by default for RuneFactory 5 (#841).

  • Where Winds Meet now defaults to PROTON_SONY_AUTO_XINPUT=0, which fixes the DualSenseeplugged (#829).

  • The Forest: fixed a crash when joining a dedicated server from the in-game browser.

Steam Overlay

  • Wine-Wayland on niri and other Smithay compositors: fixed the overlay cursor drifting or staying in place, and the overlay responding late to input (#904, thanks @yahya637).

  • Fixed the overlay cursor freezing in pointer-locked games on compositors that skip `wl_

Wayland and Windowing

  • Hyprland: fixed fullscreen games dropping to a tiled or maximized window. Examples are UT2004 rendering into a tile-sized viewport and UT4 losing fullscreen at the menu. This was a regression since GE-Proton11-7 (#871).

  • Fixed IME input (Fcitx5) freezing games with PROTON_ENABLE_WAYLAND=1 (#798).

  • Fixed a Wine-Wayland deadlock during present and focus changes, and a hang on exit, in Galaxy Idle Clicker (#908).

  • GNOME: fixed tray icons of Wine-Wayland applications not appearing. This was a regression in GE-Proton11-11 (#872).

  • Wine-Wayland: animated game cursors now animate (#919).

  • RuneScape (Vulkan beta): fixed the game window never appearing on Wine-Wayland with NVIDIA and antialiasing enabled (#837).

  • Cinnamon: windows keep their title bars and borders again. GE-Proton now treats Muffin ke Valve's Proton does(#767).

  • X11: games no longer hang waiting for a pointer grab on focus changes (#920, thanks @Syrupdesu).

  • Layered overlay windows such as Desktop Mate (#897, thanks @Mihnea8848):

  • Fast readback is now kept for windows larger than the screen.

  • New opt-in WINE_LAYERED_OVERLAY_DIRECT=1 presents directly, which avoids duplicated

  • Fixed DXVK and VKD3D-Proton device creation failing on Wayland when an OpenXR runtime iyZ (#852).

Video Playback

  • MSFS 2024: 4K intro videos no longer play in slow motion. The faster GPU conversion path is enabled again (#389).

  • Warrior Cats: Clans of the Forest: intro videos with AAC audio no longer stop playback https://github.com/GloriousEggroll/proton-ge-custom/issues/882)).

  • VRChat TopazPlayer: RTSP streams are now reported as live, so AVPro Video no longer reloads them as stalled. Patch by @l12436 (#896).

  • The Godfather: FMVs no longer flicker or flash at the edges (#909, thanks @AITUS95).

  • Arcade and Konami movie fixes, thanks @aderumier (#880, #884,#894, #895, #905,

#915, #918):

  • Silent Hill: The Arcade: movies no longer stay black.

  • Cooper's 9: MP42 movies play.

  • Yu-Gi-Oh! 5D's Duel Terminal 6: mode previews no longer turn grey.

  • Wangan Midnight Maximum Tune 5: WMV movies play.

  • Need for Speed Underground (Global VR): no longer crashes at the first movie frame.

  • Madden NFL Football Season 2 (Global VR): no longer crashes at the end of attract mov

  • PGA TOUR Golf Championship Edition III: gray blocks after fades are gone.

  • khdays-port: the game now gets past the first cutscene. Fixes a work queue shutdown deacom/GloriousEggroll/proton-ge-custom/issues/899)).

Rendering and HDR

  • RuneScape: colors no longer look washed out. Swapchains now report the same first surfahttps://github.com/GloriousEggroll/proton-ge-custom/issues/837)).

  • KDE Plasma 6.8: MangoHud and the Steam overlay no longer look oversaturated in HDR10 games on Wine-Wayland. WINE_WAYLAND_HDR_PASSTHROUGH=1 restores the previous behavior (#898, #916).

  • HDR detection on KDE no longer uses KWin's private protocol and now uses the same stands (#838).

  • Added PROTON_FORCE_HDR=1. It reports HDR when KDE's SDR brightness is set to the monitor's peak, and on compositors that switch to HDR only for fullscreen HDR clients, such as Hyprland's cm_auto_hdr.

  • Star Citizen: DLSS works on NVIDIA again without disabling bottom-up allocation. GE-Proton now keeps free the address range the NVIDIA driver reserves for DLSS.

  • Titanfall 2 and the EA app on Wine-Wayland with NVIDIA: fixed the EA app crashing at stVIDIA driver bug when Vulkan instances are destroyed(#881).

  • Arc Raiders: fixed an NVIDIA crash when the window is unfocused while a level loads (#891).

  • StarCraft II: the GPU hang workaround now applies only to Navi 10 (RX 5000) GPUs. Otherreaming (#845).

  • Warhammer 40,000: Darktide: on AMD-only systems the game now uses its native AGS library without amdxc64, restoring the FSR 4 option on RDNA3. This is skipped when PROTON_FSR4_UPGRADE is set or amdxc64

is overridden (#869).

Protonfixes

  • Added PROTON_STREAMLINE_UPGRADE. It downloads a current NVIDIA Streamline so the DLSSrks in games that ship an old one(#875).

  • Upscalers:

  • User-defined DLLs can now be passed.

  • PROTON_FSR4_UPGRADE and PROTON_MLFG_UPGRADE are now passed through.

  • The FFX4 version is controlled through the FSR4 version when OptiScaler is used.

  • Setup is skipped when the fix's conditions aren't met.

  • The Witcher 3: the Wine version is hidden for the other store versions too (#879).

  • Kingdoms of Amalur: Re-Reckoning: installs d3dcompiler_43 and d3dcompiler_47 (umu-database#159).

  • Star Citizen:

  • The libcuda workaround was replaced by the DLSS address-range fix above.

  • PROTON_DLL_COPY is applied early for the .NET install.

  • Added a fix for Ultima Online (ClassicUO Launcher).

  • Removed the Gray Zone Warfare EAC hash fix.

  • Updated the umu database.

  • The protonfixes debug output now shows the Proton build and the prefix version.

Other Changes

  • Helldivers 2:

  • Fixed a memory leak of about 34 GiB of address space and 360 MiB of RAM per hour (#917, thanks @jegglest).

  • Fixed threads and file descriptors piling up during a session (#921, thanks @jegglest).

  • Both leaks come from killed threads not being cleaned up.

  • Fixed unbounded heap growth. In EVE Online with 5 clients, memory growth went from 292 ttps://github.com/GloriousEggroll/proton-ge-custom/pull/907), thanks @greg2010).

  • Space Marine 2: fixed crashes after long play sessions. This is Proton-JE's `RtlWaitOnA

  • ntsync: a mutex whose owner dies is now abandoned even after its handles were closed, aer block forever.

  • Persona 5 Royal: fixed crashes with Reloaded-II mods (#873).

  • The Last of Us Part II: daily-run leaderboards work again (#463).

  • NCSOFT PURPLE launcher (#870): - Runs in WoW64 mode.

  • No longer stays closed after restarting itself for an update, which fixes cmd /C choice /T timeouts.

  • EA app: fixed installs failing with INST-14-1603. New prefixes include the Wine Mono support package again (#857, #881).

  • Prefixes moved from Valve's Proton to GE-Proton no longer fail .NET 4.0 and 4.8 installs. Leftover read-only links to the other install are replaced.

  • Prefix upgrades:

  • Prefix upgrade and downgrade logic runs again (#900).

  • The prefix version now follows Valve's (11.0-100). The log shows the GE build name.

  • 32-bit OpenXR applications are now supported (#906).

  • Liarsoft games (codeX RScript): reduced audio crackling. The high-quality resampler is buffers (#521).

  • Fixed WoW64 processes crashing on exit with the Wayland driver.

  • The compatibility report template now asks for Wine-Wayland and launcher details, and spresets for common problem areas.

  • Release workflow: an already uploaded release build is never replaced.

15
 
 

This is probably only interesting for a minority. But eg for those few poor souls using a linux based living room setup with an AMD GPU hooked up to a 4K120 capable TV the struggles are finally over! No more shitty DP adapters which may or may not work with VRR.

Proof:

p8pW2LKYN7B3MvT.jpg

I thought VRR would only start working with 7.4. But here we are. 4L10 stands for 4 Lanes 10Gbits which isnt the full 48Gbits but the LG CX series can only do 40gbits for whatever reason. Its still 10bit 4:4:4.

It isnt activated by default from what i understand. In my case on CachyOS with Limine i had to add:

KERNEL_CMDLINE[default]+=" amdgpu.dcfeaturemask=0x400"

to /etc/default/limine

and to apply the changes run the following in your terminal:

sudo limine-mkinitcpio

After that reboot.

If you see VRR flickering on your KDE desktop go to the display configuration and set Adaptive sync from "always" to "automatic". With that it shouldnt switch between 40hz and 120hz and vice versa when you stop or start using the mouse in desktop use. But when a game starts it should detect it and switch VRR automatically on.

You could also just wait a few weeks/months until 7.4 drops. Anyway, this makes me so fucking happy. Fuck the HDMI Forum!

Feel free to discuss what a dumbass i am for not buying a display port cabable display device.

16
17
 
 

Came across this great option, coming to steam soon but currently available on itch.io. works well to play immersive VR videos on the steam frame.

It looks like streaming VR content from websites is not something that can easily be done current state on the frame. If you have VR videos loaded on a local hard drive, this app works great to view them via the 6ghz dongle.

Hope this helps someone because I was not having success with deovr or other players on steam.

Edit: Realizing this might not be gaming related but steam frame related. If there's a better community for this sort of content would you please let me know?

18
 
 

So I'm new to modding PC games. I wanted to recommend a way using a mod manager called Amethyst-Mod-Manager, which installs and manages game mods from Nexus Mods. It has native support for almost 100 games listed at https://github.com/ChrisDKN/Amethyst-Mod-Manager/wiki#supported-games . But one can add manually more games to the list, but I didn't test that out. Just tried out modding Stardew Valley for the first time, and plan on trying Cyberpunk 2077 too.

My little documentary of the steps and what is needed:

  1. Download and install the application. Choose from https://github.com/ChrisDKN/Amethyst-Mod-Manager#install options, I chose the AppImage for testing. If it doesn't have self updating, I might go for Flatpak later.
  2. To download and manage mods from the app, you need an account on Nexus Mods. There is a free tier (which I use) with limitations such as download speed, but it does not cost any money. A new account can be created at: https://users.nexusmods.com/register For me it took a few minutes before the verification email landed, so have this in mind.
  3. If not already connected, in the Amythyst App go to Settings > Connections and click "Login via SSO". You should be connected to Nexus Mods now and can start adding mods.
  4. Add a game to the list. But first you need to download the game, in order it to be detected. I play on Steam and downloaded Stardew Valley in Steam (because its small, and I wanted to test it quickly). Then come back to the Amythist App and add the game, it should automatically find the location and configure it.
  5. Then I clicked the "Wizard" button on the app and installed "Install SMAPI".
  6. On the main page of the App, click "Nexus" button, and choose "Open Nexus Mods". This will open a new tab in the App, listing all mods for the game. Choose what you want to install, in my case I chose "SMAPI" again, the "Content Patcher" and "CJB Cheats Menu". Click the "Install" button for the mod.
  7. This should open the page in your external web browser (in my case Firefox) and ask you to open the link. Click it and select "Slow download" (if you are on free tier) and the download process should start. It will install the mod for you.

It's exciting to finally be able to mod PC games as well. And I hope this helps you figure this out, if you are new to this too. Especially so on Linux, where modding was always a bit problematic before. But this makes it so much easier for me to finally try it out. Have a nice day.

19
20
21
 
 

I got a gaming computer a few months ago and installed Pop OS on it. No particular reason for this distro-choice. When I buy a computer, I run with the first distro that installs easily.

I was gonna dual-boot with Windows, but well why assume Linux won't work and pre-empt. Let's try monobooting first.


The computer is basically offline. I connect to the internet when I need to download a driver or something like that. Was thinking of making the computer 100% offline, but that introduces headaches with certain uploads and installs. So all one-player-games, the way I like, might be hard for the amongus generation to relate.

I download games from Fitgirl to a Raspberry Pi and external drive. It's more energy-efficient anyway to leave my Pi running than a gaming computer. Then I transfer the games to the big computer.

I don't use Steam, not even sure what that is. I have never seen a microtransaction, online multiplayer, or ads. My games come with all DLCs bundled.


Do I have tech trouble making games work on Linux?

Sometimes. Standard operating procedure is run the installer on Bottles (https://usebottles.com/) and then run the game with wine game.exe

The more games you install, the more likely it is to be an error you've seen before, so gaming on Linux becomes easier over time. I keep a .txt file of how I got each game working so I can re-try solutions.

Two important tricks to save the headache of troubleshooting –

  • go to Plan B. If the Fitgirl repack didn't work, try the Dodi Repack. Or a different version number. No point wasting your time dealing with tech problems.
  • a gaming computer is the same thing as an AI computer. I run Qwen locally and show it the error messages, tell it to fix it, then come back after a few hours. This works great. Culture warriors will be like "oooh AI bad"... mate it just figured out my game was using Wine D3D instead of DXVK and the wrong card, and autonomously changed the settings. I don't care if you think "AI bad", I put in two minutes of effort instead of two hours and the problem got fixed.
22
23
24
 
 

Hey everyone!

I’ve tried digging on the web, GitHub and last resort asking the stupid robots (Claude) and I can’t figure this one out.

When I’m booted into Bazzite Gamescope (bazzite-deck) if I use my Steam Controller, the color looks fine, as soon as I use the trackpad or my mouse, I’ll see a reddish tint to the colors. It’s like it gets warmer and then when I switch back to controller it’s normal again. Doesn’t happen in Desktop mode.

I noticed initially when I first built my BC-250, internet suggested turning off HDR because I’m using a passive DisplayPort to HDMI adapter. This seemed to work and I hadn’t noticed it since. Then I booted up and ran updates the other day and noticed it’s back. Really frustrating if I want to play a RTS with my Steam Controller, color changes every time I use the mouse.

I found some stale issues on GitHub and they all suggest turning on Use Native Color Temperature, but this doesn’t make a difference for me.

Curious if anyone else has experienced similar issues?

  • BC-250
  • LG CX
  • JSAUX DP to HDMI Adapter
  • Steam Controller (2026)
  • Logitech Mouse
  • Bazzite (version 44, stable, bazzite-deck)

Let me know if I can share any additional information

25
view more: next ›