[–] [S] 1 point 2 months ago

I have an earlier post here going over it. But this 1 print is 3 separate prints. I first print the Spine, which has alignment groves. Then I remove it from the print surface and print the back. The print will stop after the first layer so I can add in the spine which is held down with magnets. The I resume. This will print the next layer ontop of the Spine, which melts it in and creates a solid connection, no weaker than a normal TPU print. I then remove it and do the same to the cover.

  • source
  • parent
  • context
  • [–] 6 points 2 months ago

    Sounds weird, but Ascendance of a bookworm and time. Use to work agile and doing things quick, then I read bookworm and the tiny gremlin who wanted to do things quick and now, and the consequences for doing so.

    Now I give as much time as I can/need for anything and everything. And I now start getting annoyed when family says they’re dropping in. Like dude, give me time to prepare, like 2-4 days heads up so I can clean, get more food and properly welcome you.

  • source
  • [–] [S] 2 points 2 months ago

    AM2R is on Portmaster, which is how I played it. Proton also lets you play on Linux if you want to there.

    Dread is next, but this system isn’t powerful enough for a switch title, and I’m yet to recover from my last play through to go back to that game.

  • source
  • parent
  • context
  • [–] [S] 3 points 2 months ago (1 child)

    Metroid always felt like you could get lost, but the environment had enough clues to get you back on track. Map has holes in the area here. Progression traps you there. There were times in Super, where the game almost gives you that sierra moon logic to get yourself out. Thankfully it doesn’t, but it’s mighty close.

  • source
  • parent
  • context
  •  

    When I originally designed my Virtual Boy Tripod Kit, it was the most complicated design I had done up to that point. However to make everything work I needed metal nuts and screw, plus an elastic band to hold everything together.

    Since I started modeling my own screws, I wanted to go back to this kit and re-design it to be properly 100% 3D printed without loosing the functionality.

    And this was my result. The body's shape is pretty much the same. However I am so please with how the mechanism works for the lock nut and thumb screw.

    The screws are a bit tricky to print. But man this is so cool to slim this down.

     

    Ran across this in a discussion about Nintendo's Virtual Game Cards and Key Cards.

    For myself it's

    Physical > Perpetual Digital (GOG) > Key Cards (Switch 2) > DRM Digital (Steam/PS3/Xbox 360) > Account DRM Digital (PS4/Switch/Xbox One) > System Locked Digital (3DS/Wii U) > GamePass > Streaming Games (Amazon Luna/Stadia)

    For some context.

    While Key Cards are digital they are not tied to hardware which means so long as the servers are still running the game can be downloaded and played... presuming no additional authentication is required.

    DRM Digital is bellow that since services like Epic Games, and Steam still require re-authentication from time to time. Though Steam is getting better thanks to the Steam Deck.

    GamePass is low because it is the same as Game Rental. You don't own the game. Good to try never to own.

    On that note, physical games with download codes inside don't even get a place on my list. Got tricked into buying Patapon 2 this way and I always read the games fine print ever since.

     

    Got myself a PolyDryer and was very confused why it included bowden tubes. But then I had an idea. Why not just include a mount for the tubes on my setup and use it to guide my filament into the printer. Love how well it turned out.

    https://www.printables.com/model/1354587-slim-filament-guide-for-prusa-mk4

     

    If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

    Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

    If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it's no on the layer lines.

    Using them in my own prints which had metal screws and they are holding quiet well.

     

    If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

    Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

    If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it's no on the layer lines.

    Using them in my own prints which had metal screws and they are holding quiet well.

    view more: ‹ prev next ›