I was just looking to plug a new zigbee coordinator into a POE switch today, then thought - that's going to be on the wrong VLAN, or, did I trunk the uplink...?

So... that made me think - is anyone using / tried / failed to export device configs, feed it into an AI, and get it to draw out the network??

Just a bit of an open discussion really...

I did my CEH a few years ago and luckily work paid for it - if it was my own money, I'd be asking for a refund.

The course content included stuff from ~10 years earlier, inc. referring to tools that hadn't been maintained (ie in github) for years and basically didn't work any more... and topics like warchalking.. ok, it's interesting to know the history, but as the Wikipedia article mentions, I don't think it really took off and no-one uses it anymore.

So, I let my certification slide and the EC Council have been continually trying to "remind" me to pay for my membership.

I just don't have the feeling that they're really trying to keep up and improve the industry.

I'm now managing a team of Cyber Security Engineers and this came up as a training topic recently, so I'm looking for others to help me reset my bias.

So... did you have the opposite experience?

Hi good people... just looking for some feedback ...

I have a couple of Raspberry Pi 3 with audio amp outputs (one has a touchscreen as well).

They're currently running Volumio (v2) which we can control remotely with our phones, but that software is old, insecure, and could really do with an update...

Volumio (v4) doesn't inspire me much, plus, it's good to check out the alternatives.

So, I'm looking at replacing the local-audio playback with perhaps Moode ... or maybe piCorePlayer and perhaps adding Navidrome for remote access??

I'd need to be able to play radio streams too, with a sleep timer / wakeup function, so not sure if that's a deal breaker (it's hard to find these features on their websites)

Any alternatives that others can suggest (rAudio?) or other feedback?

Or am I ahead of the curve and I have found the Best Solution™️?

TIA

So. I have a nice HA system setup at home, based on a VM with lots of sensors and offline control. All good.

It's getting to that time where I'm looking to simplify my Mother's apartment so that she can use voice to turn on the lights, TV, etc.

She's completely embedded in the Amazon / Alexa ecosystem...

As I've built up a non-cloud, offline self-hosted setup over the years, I've no idea where to start with a very simple, but obviously cloud-connected system for her to use Alexa.

What's the best way here? HA Green? Intel NUC?

I don't need any LLMs - she's got Alexa for that... so I think even a Pi would be fine.

Anyone recently done something similar?

We're not setup for hot weather, so we resort to all kinds of things to keep us and our homes cool.

Apart from ordering fans from Amazon, what else have you been doing to keep cool?

It seems that Fairphone will finally end the Fairphone 3 (and 3+) support in August after 7 years.

I am still using my FP3+ daily - the only thing that has gone wrong with it was that I wore out the USB connector with cheap charging cables... so a new bottom connector (and a spare battery, just in case) and I'm all good again...

... which means, I might not be buying another phone for another couple of years yet, let's see if it'll make 10 years with LineageOS, etc!

I'm sure there's other phones still chugging along...

I'm running a <cough, cough> years old instance of Volumio 2 on a Raspberry Pi 3

The security of this is terrible, but it sits in my bedroom with a local USB drive full of music and works absolutely fine with a Nanosound DAC audio preamp hat / board which makes it sound lovely... which I don't want to change (it handles a remote control with power on / off)

When Volumio 3 came along, I wasn't impressed, didn't see the software improving much... it was starting to be more of a pull towards their subscriptions

So, I've left it alone and feel like it might be worth a revisit.

So, how's Volumio 4? Or... should I consider another FOSS product ( has to work with the same hardware).

TL:DR; Has anyone here successfully migrated their data & workflow from Logseq to Silverbullet?

... wall of text follows ...

I've been using Logseq for a few years and it has been a life saver at work, trying to track the stuff going on - honestly, I'd have burned out if I hadn't found it.

However, I still haven't quite got all the things organised and I feel Logseq's development is taking a different track that I don't want to go down (db, collab, etc)

SilverBullet.md appears to be developing into the solution I'm looking for... although I don't want a server-client architecture, so I'm running it standalone at the moment.

But, the learning curve feels so steep it's tending to curve back on itself... or... I'm just too busy to focus on learning it.

I see how the file structure works, but I don't understand how the templates, journals, etc work (really simple.in Logseq)

It appears to be 1 person developing this with lots of helpers who all seem happy to chip in with some AI generated code in the forum, but no meaty documentation, examples, etc.

If you've read this far... is it worth sticking with? Is there an FAQ I've missed? Any pointers or encouragement...?

Ok, this seemed like a simple one, but damned if Google / Youchoob will give me a straight answer...

I'm putting up a greenhouse in a clay soil garden, so I want a nice concrete foundation (ring, like for a house, not a slab)

What mix do I need for that base, assuming it'll be underground / water and I'll put a row of block on top for the base to screw in to?

And... if it's easier than dragging stuff through the house, can I get away with just bags of postcrete?

After being home for weeks, I went away for business, the 1st night away there was a brief powercut and the firewall (on a UPS) seemed to get stuck.

So, that's no DNS, DHCP, or connectivity between wifi and LAN... All due to (admittedly aging) hardware issue.

Since then my entire home system has had issues whilst it all settles down.

It made me think about getting some redundancy into the system to handle a single failure.

So,.can you give me any insights into High Availability like CARP (for pfSense), VM failover (on Incus?), mesh wifi, Home Assistant, etc?

Of course there are going to be single points, like ISP line, etc, but seems like something to test out.

So, just a light post, I upgraded my Pi4 last night and found the Linux firmware breaks a 32bit install.

I've been meaning to change to 64bit for months, but as it's my DMZ box for torrents, radicale, etc, then it's just finding the right time to convert an adhoc setup into my ansible scripts.

Luckily I had a SD backup from September to get it running again

So, what have you broken over the holidays?

I've been generally running various different ways of backing up files to my NAS (which then backs up to other locations...) - mostly syncthing for photos and large collections of files, but I tend to use rsync to push out config backups to the NAS once something's working.

But, the NAS is only powered up a few times a day (to save on electricity costs), which is fine for manual pushes, but makes scheduling backups a bit tricky.

It dawned on me that it might be better for the NAS to pull the files via rsync instead of pushing them.

Anyone tried this route and have any advice?

Just been supporting someone remotely and was waiting for them to turn on their laptop...

Whilst troubleshooting I ran uptime to see how long we'd been working on the problem and saw it was up for ~2 weeks...

Which made me think ... how do you tell how long a device (laptop) has been running, but since it's last suspend / hibernation?

I can find it from other clues such as journalctl -b -fu systemd-logind and look for Lid opened, but I was really looking for an smarter way...

Just a nice little challenge for anyone bored at this time of year :)

cross-posted from: https://discuss.tchncs.de/post/49194514

I stumbled across Diode whilst looking for ways to do secure off-site backups (to my own equipment at another house) and it feels like a paid-for TOR (Ok, there is a free option)

I'm looking for any real experience as the site has too much marketing lingo in it:

Every Client is secured with a public/private key self-custody identity

And this doesn't seem very dynamic if I want to change something:

Diode’s Blockchain Name System can be used for Client friendly names

And somewhere on the site it infers unlimited storage...!

So, is the free option worth me looking into, or is it a waste of time?

The internet is down... well, if you use AWS services it would appear to be true.

Things such as Alexa (now working again?), Ring, etc are either slow or not responding whilst they try to get things running again

A colleague was discussing an option to use different vendors either side of a DMZ and suggested StormShield... I'd not heard of them before.

Looks interesting, albeit an old Gartner "magic quadrant" showed their firewalls as being in the bottom left corner... so I thought I'd ask here for real-life opinions on them... if any?

Interesting article where ~35k devices from 45 manufacturers have vulnerabilities

Advice is probably not as easy to implement as this in real life:

Forescout recommends that you immediately stop the direct connection of devices to the Internet, to use VPNs or segmented networks, and to ensure prompt firmware updates. Otherwise, tens of thousands of systems around the world will remain a potential entry point for attackers.

I saw a similar post here recently, but this is slightly different.

I'm running MythTV on Arch which is working fine (of course), but when MythTv came out of the main packages and went to the AUR, it was just a little harder to maintain and had some compolation issues due to ffmpeg, etc - to the point: my last update was probably 3 years ago.

The (minor) issues I currently have are:

• terminator won't start 1st time, but starts fine 2nd time
• shutdown's take a few minutes due to a systemd issue
• everything's woefully out of date

So... considering all the changes with audio and video over the last few years do I just pacman -Syuv and crack on... or... start again from scratch?

(Yep, full backup 1st)