278
Running the joke to the ground (sh.itjust.works)
submitted 1 year ago by to c/linuxmemes@lemmy.world
26 comments fedilink hide all child comments
 

After this post, here is how you can ACTUALLY do all of that with Emacs.

All of these Emacs extensions are basically text-based and more or less difficult to use. You WILL have the core functions of the Google stuff, but don't expect to have a good time.

Degoogling:

For all my Emacs users out there, am I missing something ? Do you have alternatives / more usable recommandations ?-

A half-joking guide on how to replace all the Google services with Emacs packages.

all 26 comments

sorted by: hot top controversial new old
[–] 45 points 1 year ago (3 children)

Great, now I need a replacement for emacs

runs

  • permalink
  • fedilink
  • source
  • hideshow 3 child comments
    •
  • [–] [S] 24 points 1 year ago (2 children)

    ofc if you don't want to edit code with Emacs, you can always run Vim in eshell in Emacs ! =P

    or even (god forbid) running VSCode in Emacs in exwm mode

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
    • [–] 15 points 1 year ago (12 children)

    I have been so lazy when it comes to learn emacs and vim, but this sounds interesting enough as a start

  • permalink
  • fedilink
  • source
  • hideshow 12 child comments
    •
  • [–] [S] 18 points 1 year ago (9 children)

    Interesting for sure, but I would not recommend going for most of these packages unless you are already very familiar with Emacs.

    Here are the steps I would recommend if you find motivation to learn the editor:

    1. Install it, learn the basic use and navigation
    2. Focus on learning and configuring it for your main use-case (writing code in a specific language, taking notes, writing papers, playing Tetris, etc.). This might take a while.
    3. Question life, re-try VSCode and get instantly grossed out.
    4. ???
    5. Try weird packages, moving most of you digital life inside Emacs.

    Enjoy =)

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 9 child comments
    •
  • [–] 11 points 1 year ago* (1 child)

    May I suggest trying VS Codium instead of VS Code for step 3 and potentially (not guaranteed) not be grossed out too much? It's a FOSS version of VS Code that removes telemetry and most of the gross Microsoft stuff.

    @chottomatte@lemdro.id, see above

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 5 points 1 year ago

    Thank you, I've tried it before, but it still has some restrictions like extensions , in my experience I didn't notice a difference as I don't use a lot of extensions, but I still prefer to stay away from anything that Microsoft put limitations on , even if it doesn't affect me now, it might later

  • permalink
  • fedilink
  • source
  • parent
  • [–] 5 points 1 year ago* (6 children)

    Thank you, I didn't mean I'll rush and install all of the mentioned things in the post, but it motivates me to learn

    actually I have two problems: 1- I don't know where to start 2- I'm too lazdy to search for resources so I start

    And please don't mention that VS code piece of shit in front of me even as an example, I can only use Windows as OS , one product by Microsoft is enough to tortue me

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 6 child comments
    •
  • [–] [S] 4 points 1 year ago (3 children)

    Okay so here's the thing: Emacs runs best on Linux and MacOS (allegedly, bc UNIX-like) but it is more difficult to make it do what you want on Windows (afaik, never tried this). You'll probably need WSL.

    So if you have to stick with Windows, I'd suggest to search specifically for configurations and advice from other people who have done this. It will give you a base for installing and probably running a custom configuration.

    From there, that my point 2), you should focus on trying and making YOUR workflow to run in Emacs. I really suggest to focus on one thing at the time and configuring it until it works the way you want. Otherwise you'll end up with many half-backed systems and that's frustrating.

    What is your main use-case then? Maybe I can give some more precise advice if I'm familiar with it!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 3 points 1 year ago (2 children)

    Thank you, I'll take your notes into consideration , currently it's just learning C , I use Code::Block for it

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 1 point 1 year ago (1 child)

    Sweet! It's actually my main language. C mode is built-in so no concern on that side.

    Some general advice:

    • I leaned it way too late, but you can use M-x compile and then type your build command (make clean && make all) instead of using a terminal to compile your project.
    • Try to learn a bit about Makefiles, it's useful. Avoid cmake like plague.
    • C is great for embedded, so you should look up TRAMP if that's your use case; it basically removes the need for SSH-ing from a shell.

    To have Emacs behave like an IDE:

    • Install clang17 clang17-extra-tools bear on the host system.
    • Configure eglot and company in your Emacs config:
    (use-package eglot)
(add-hook 'c-mode-hook 'eglot-ensure)
(with-eval-after-load 'eglot
  (add-to-list 'eglot-server-programs
               '((c-mode c++-mode)
                 . ("clangd"))))

(use-package company)
(add-hook 'after-init-hook 'global-company-mode)
    • Use the bear tool (ex. bear --config bear_config.json -- make all) to make the non-trivial project understandable by Emacs. Since it re-uses your Makefile, it even works for cross-compilation!

    Good luck!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
    • [–] 9 points 1 year ago* (1 child)

    You should remove ) after https://www.emacswiki.org/emacs/mu4e)

    And

    https://lucidmanager.org/productivity/using-emacs-image-dired/)

    And all the others

  • permalink
  • fedilink
  • source
  • hideshow 1 child comment
    •
    • [–] 9 points 1 year ago

    Love emacs, and have lots of ease-of-life functions and keybinds in it. But the UX of the base editor feels so dated. Like how pointer moves with scroll, how scrolling isn't smooth etc etc

  • permalink
  • fedilink
  • source
    •
    [–] 13 points 1 year ago (1 child)

    Gptel is better than ellama. Ollama only runs small junk. Llama.cpp is way better because it will split CPU and GPU and run bigger quantized models, especially large MoEs on a 16 GB GPU.

    I started trying to mess with image-dired today for a few minutes to try and get my training images and caption files to sync and scroll, but didn't get very far before just tiling... such a noob

  • permalink
  • fedilink
  • source
  • hideshow 1 child comment
    •
    • [–] 4 points 1 year ago

    We need a degoogle.el to implement this!

  • permalink
  • fedilink
  • source
    •
    [–] 2 points 1 year ago

    Rad

  • permalink
  • fedilink
  • source
    •
    [–] 2 points 1 year ago

    I really want to get into using Emacs properly but it really seems too difficult. I actually already use org a little bit but I don't think I'm using it properly lol. It runs and works really well on my potato pc compared to other electron garbage though..

  • permalink
  • fedilink
  • source
    •
    [–] 0 points 1 year ago

    Google Chromium, sans integration with Google https://github.com/ungoogled-software/ungoogled-chromium if you need a chromium browser

  • permalink
  • fedilink
  • source
    •