I'm not changing to a seed box because I prioritize the fun of maintaining my own hardware.

IfnXpXZtekLBlFk.png

Given the jurisdiction that I live in, I have to use a VPN. It's on my routers, so I don't need to bind my client to any particular interface. Anyway, since I'm not recording/logging my traffic, I can't be sure, but the fastest speeds that I have observed was 60+ Mbps. I guess it's the choice of Linux IOs, being all Blu-ray remuxes. Too bad I have to "waste" a 1 Gbps connection on seeding passively...

Night.

all 45 comments

sorted by: hot top controversial new old
[–] 57 points 1 day ago (1 child)

I think I can speak in the name of every person who sails the high seas here.

We thank you for your service!

☠️ 3
  • source
  • hideshow 1 child comment
  • [–] 21 points 1 day ago (1 child)

    In the name of all sailors on the high seas: Thank you for your service

  • source
  • hideshow 1 child comment
  • [–] 12 points 1 day ago* (2 children)

    Qbit uses Mibibytes so your upload speed is actually 392Mbps in that photo

  • source
  • hideshow 2 child comments
  • [–] 7 points 1 day ago (3 children)

    Fuck save some ratio for the rest of us.

    My shit tier asymmetric network is lucky to hit 1 MiBps (~8 Mbps) upload. Mostly it sits idle because of Chads like OP. I have yet to see it go much above that even though I'm supposed to get like 50 Mbps up. So with a box that's got years of uptime, I'm barely at a ratio of 1.1.

  • source
  • hideshow 3 child comments
  • [–] [S] 2 points 23 hours ago (2 children)

    Wait a minute... this, I never thought of before. Are the clients defaulting to draw from higher bandwidth sources? I guess it makes sense out of... "gimme ma data FAST", but then it's not surprising that some comrades over at those private trackers fight for their LIVES trying to bump up their ratios. Aww shit. Best of luck to you!

    Also, what's an asymmetric network? :3

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 20 hours ago

    Are the clients defaulting to draw from higher bandwidth sources?

    That's just a consequence of big differences in speeds between clients. The downloads are segmented, but for example, while you serve 10k segments he serves only 1. Now, consider seedboxes, people with 1+ Gib upload speeds... So it's very hard for him to have upload credits.

  • source
  • parent
  • [–] 2 points 19 hours ago

    Are the clients defaulting to draw from higher bandwidth sources?

    In addition to the raw difference in upload rate for a file, most torrent clients will cycle out the slower seeders if they think there are faster seeders available.

    My seed box with years of uptime is sitting around 12 TB down, 13 TB up, which is like 1/10 your total upload.

    While I have to be a little bit mindful, it's not a huge issue because most trackers with ratio requirements have enough free leech and alternative currencies to let slowpokes hang without concern.

    Also, what's an asymmetric network? :3

    Cable with like 200 Mbps down / 20 Mbps up (as opposed to fiber which is usually symmetric 1 Gbps down / 1 Gbps up). The big cable companies in the US pretty much all grossly over prioritize downloads over uploads.

  • source
  • parent
  • [–] 6 points 1 day ago (1 child)

    Thank you for your service

  • source
  • hideshow 1 child comment
  • [–] 6 points 1 day ago (1 child)
  • [–] 5 points 1 day ago (1 child)

    A true beacon of humanity!

  • source
  • hideshow 1 child comment
  • [–] 5 points 1 day ago (2 children)

    What a fuckin humble brag, very large of you though, that's some serious data transfered. I was proud of my like 2.0 seed ratio

  • source
  • hideshow 2 child comments
  • [–] 4 points 1 day ago (1 child)

    Pretty wild stats. I've been going for over 2 years on these stats, but they actually suck compared to your 25 ratio. Nice.
    I rarely see speeds above 25 MiB/s despite having a 1 Gbps.

    Btw. are you on the enhanced client? I don't have the "Request latency" statistic.

  • source
  • hideshow 1 child comment
  • [–] [S] 2 points 23 hours ago

    Yeah, but if you take a look at my downloads, it's not that crazy. I haven't downloaded nearly as much as you, so don't beat yourself up about it! :)

    Hm... I'm using qbittorrent-nox, the one with the web UI, because I'm one of those if there is but ONE BINARY DIGIT on my system that I don't need to SURVIVE, that's "bloat"!!!. The normal client for Linux is probably fine too. xD I haven't heard of this "enhanced client" thought.

  • source
  • parent
  • [–] 4 points 10 hours ago (1 child)
    [–] 3 points 1 day ago (1 child)

    Thank you for sharing.

    How may HDDs have you gone through?

  • source
  • hideshow 1 child comment
  • [–] [S] 3 points 23 hours ago*

    Thanks for commenting!

    It was a dark winter night when it suddenly hit me: I'm a grown ass person and I can do whatever I want with my own money and nobody can tell me otherwise. This was before the darkness. Before the Empire*. I bought four 4TB SSDs and called it a day. It has been that day every since. My torrenting needs are fortunately extremely limited to a few movies and shows - and the occasional requests placed by friends - so I have never had to go beyond the 16TBs available to me. I guess I "rotated" (deleted) some stuff that I was rarely watching at some point, but that's about it storage management wise. Since none of it is operation sensitive data, I don't have to invest in backups either. For those few gems that I never ever want to risk losing, I have a small 2TB HDD that a rarely fire up.

    *Read: LLM datacenters and semiconductor shortages driving up storage and RAM prices.

  • source
  • parent
  • [–] 3 points 16 hours ago* (last edited 16 hours ago) (1 child)

    I just hit 200 TiB upload the other day, staying at a solid ~12 ratio.

    ty for your service

  • source
  • hideshow 1 child comment
  • [–] 3 points 52 minutes ago* (1 child)

    i recently set up my limits to 10kb/s overnight up and 50kb/s daytime up from infinity just to keep my sanity but i still think its pretty reasonable; usually between 80-100 in active at a time.

    a lot of them are more niche older stuff with few seeders and peers so they're active if anyone wants them but not popular persay

    qbt all time statistics

  • source
  • hideshow 1 child comment
  • [–] 3 points 1 day ago (1 child)
  • Awesome work! If you're running an openwrt router, there have been some important security patches in the the recent firmware updates.

  • source
  • [–] 2 points 1 day ago (1 child)
  • [–] 2 points 12 hours ago* (last edited 12 hours ago) (1 child)

    Serious effort. Thanks.

    Im only at 3TB uploaded but also only public trackers.

  • source
  • hideshow 1 child comment
  • [–] 2 points 17 hours ago (7 children)

    And here's me who i don't even know how to seed

  • source
  • hideshow 7 child comments
  • [–] [S] 1 point 17 hours ago* (6 children)

    If you have downloaded something using a torrenting client and don't delete the torrent file/entry from the client and you don't move the download file(s) to another location outside of the client (other than using some "move file" function from within the client), then other people are going to be able to download the file, or pieces of it, from your computer. When that happens, you are seeding. In other words, you don't have to actively do anything in order to seed. Just let the files and torrents sit. 😊

  • source
  • parent
  • hideshow 6 child comments
  • [–] 2 points 10 hours ago (3 children)

    I might be doing something wrong as I leave my torrents in place for weeks and it's always on upload speed 0.00 and uploaded amount on 0 as well.

  • source
  • parent
  • hideshow 3 child comments
  • [–] [S] 1 point 4 hours ago (2 children)

    As @eah@programming.dev mentioned, you might have to configure your firewall.

    1. Are you on Linux or Windows?
    2. What firewall are you using?
    3. Show us your firewall rules (make sure to blurr out your public IP if it's visible)
  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 1 hour ago (1 child)

    I am on debian stable and use ufw. I only allow ssh, http, https, sunshine (streaming server) ports and kde connect ports. What port am i missing?

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 1 point 1 hour ago* (last edited 1 hour ago)

    If you are using the default settings of ufw, then you shouldn't have to do anything to start passively seeding, since your firewall shouldn't be blocking outgoing connections. The then established connections count as, well, "established", and the default configuration of ufw is supposed to allow those incoming established connections.

    Passively seeding means that you are only able to connect to users that have forwarded some port on their router - which is also set in the torrenring client - that directs traffic to your torrenting client. It also means that others can't connect to you before you have made a connection to them first. This, again, shouldn't be an issue, since the client should be smart enough to initiate those connections. It does however impact your discoverability, which impacts your seeding efficiency.

    The stats you see in my OP are from passive seeding only, non port forwarded configuration. My firewall allows all outgoing traffic and blocks all incoming traffic, except for those that come with the established flag.

    Are you perhaps seeding only a smaller number of not very popular torrents? Do you have particularly slow/low bandwidth network?

    Edit: perhaps try adding some trackers. There should be public tracker lists out there which you're supposed to be able import, but I don't know how to find these and what - if any - caveats they come with.

  • source
  • parent