dd if=/dev/urandom of=/dev/null  

Feel free to fork.

all 37 comments

sorted by: hot top controversial new old
[–] 96 points 3 days ago (7 children)

You can also heat your place while doing science: https://foldingathome.org/

  • source
  • hideshow 7 child comments
  • [–] 32 points 3 days ago (4 children)

    Unironically. I did this with my 480 back in the day in an uninsulated apartment. Also crypto mining in the narrow slice of time where it was profitable-ish to do so with a consumer GPU. But then ASICs took off and I went back to folding / SETI

  • source
  • parent
  • hideshow 4 child comments
  • [–] 6 points 3 days ago (1 child)

    I remember trying this for a little bit too and did some crypto mining, but after leaving it on for days my room refused to warm up at all. I think the room was just too big for the heat output of the pc to handle. In the end i gave up and just turned on the heater again.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 6 points 3 days ago* (last edited 3 days ago)

    Yeah, it was basically like me running a ~400 watt heater. It's not a ton, but it's also not nothing. Even when I did use resistive electric heaters, I still kept it going because it still contributed. 15A 120v circuits, ~1500w heaters are the norm. At the time I did that I was also running Dual Xeons; so, full system draw was in the ballpark of ~600w. At the time, it was cheaper-than-free heat, so why not, even if just supplemental.

    Of course, now that doesn't work at all; always a loss. But still: It's a heater that does some limited good while also heating. The electricity is the same anyways... May as well push it through some logic gates before warming my room.

    100% efficient. (of course, heat pumps can go over 100%... But as far as resistive heating goes, it's not like a GPU is any worse then a space heater... Watts are watts)

  • source
  • parent
  • [–] 5 points 3 days ago (1 child)

    How much did someone make from that? With one ordinary PC I mean, to not turn my question into a "how long is a rope" type.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 4 points 3 days ago*

    At the time I was running it, it was about enough to offset the cost of electricity and maybe turn a slight profit. Nothing substantial. But then it got way harder to mine btc and asics dominated the field.

    Of course, had I started a few years earlier, I'd probably be a billionaire.

  • source
  • parent
  • I did this a long time ago but found that by the time my systems completed work, they were already completed and I never got any credit. Not that credit was the reason I did it, but also my results were just wasted. It's probably been well over a decade since even looked at it and longer still since I tried doing it. Has it gotten any better about assigning smaller units of work or any other mitigation of those kinds of issues?

  • source
  • parent
  • So for a while I was the weed hookup of my D&D group. It was great because they all worked in education, except me and one other guy. The other guy worked as IT at a company that works with IBM on printers. Due to this he was more than happy to bring me a tower that they were going to throw away anyway, in exchange for an 1/8th or 1/4 depending on the specs.

    Due to this, and a fairly strong EvE Online habit at the time, I ended up with 8 former servers that I had maxed out everything that their boards could handle. Going and setting up my accounts to mine in a belt was enough to heat my apartment all winter.

  • source
  • [–] 12 points 3 days ago (2 children)

    i no joke heated my room with gentoo on ppc one winter.

  • source
  • hideshow 2 child comments
  • [–] 23 points 3 days ago (5 children)

    Look at ol' Moneybags here, with their computer hooked up to their neighbor's electric meter.

  • source
  • hideshow 5 child comments
  • [–] 16 points 3 days ago (3 children)

    If the alternative is an electric heater, it's not gonna be any less efficient to use your PC... Saves you the cost of a heater too!

  • source
  • parent
  • hideshow 3 child comments
  • [–] 7 points 3 days ago (4 children)

    Great opportunity to get into mining monero, I've been using my gaming PC as a heater for years now, compute generated heat is almost 100% as power efficient as a regular electric heater.

  • source
  • hideshow 4 child comments
  • [–] 5 points 3 days ago (1 child)

    Regular electric heaters kinda suck, though. Heat pumps are 3-5x as efficient (they can go above 100% because they move heat rather than creating it) and natural gas is often cheaper per BTU.

    I'm not saying that mining crypto in the winter is bad, just that it isn't necessarily completely "free" if your regular heater is something other than electric resistance.

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 2 points 3 days ago (1 child)

    But my 3080 is LHR :(

    Other than that, what wallet do you recommend? :)

  • source
  • parent
  • hideshow 1 child comment
  • [–] 5 points 3 days ago

    Monero is cpu mined. I think there are ways to mostly bypass lhr now if you wanna gpu mine. For monero I use feather wallet on pc but the official gui wallet is also pretty good. For android cake/monero.com wallet is often recommended, personally I use unstoppable wallet and monerujo.

    Check out https://whattomine.com/ to figure out the most profitable coins for your system.

    For monero have a look at https://www.getmonero.org/get-started/mining/ If you want the simplest solution you can just download xmrig, change the config to point it at your wallet address and a centralized pool like https://hashvault.pro/monero/getting-started , supportxmr.com or https://www2.aterx.com/ and run it with sudo. There is a slightly more profitable decentralized way called p2pool but you have to run your own node to use it, https://gupax.io/ is a tool that makes it very easy.

    ❀️ 1
  • source
  • parent
  • That's my kind of humour. Ace!

  • source
  • [–] 6 points 3 days ago* (last edited 3 days ago) (3 children)

    Just have a LLMs commit some felonies

  • source
  • hideshow 3 child comments
  • [–] [S] 1 point 3 days ago (2 children)

    Never installing an LLM again πŸ˜‚ unless it's meant to work on things like: https://norecognition.org/about

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 2 days ago (1 child)

    This LLM-speak on the site is unreadable

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 1 point 2 days ago

    It is quite poorly written, not very accessible for the uninitiated. But to summarize, this hacker has developed a visual pattern that he prints onto clothes. These patterns confuse those AI-backed cameras with which the government spies on its population.

  • source
  • parent
  • [–] 4 points 3 days ago

    Time to drag out my G5 Power Mac.

  • source
  • [–] 4 points 2 days ago (1 child)

    Any sufficiently advanced compiler would optimize this away.

    beepThis is obviously a joke.

  • source
  • hideshow 1 child comment
  • [–] [S] 2 points 2 days ago

    If we all work together, maybe, just maybe, we can dumb down the kernel not to handle excessive syscalls? But then again, the CPU itself is probably riddled with malware that throttles it when it senses overheating :((( stupid microcode or whatever.

  • source
  • parent
  • [–] 3 points 3 days ago (5 children)

    For research purposes, any way to parallelize across all cores?

  • source
  • hideshow 5 child comments
  • [–] 3 points 3 days ago (1 child)

    for((i=0;i<$(grep -c '^processor' /proc/cpuinfo);i++)); do dd if=/dev/urandom of=/dev/null & done

    killall dd if you want to kill them

    Caveats: Runs on my machine. Might not work on yours. If it does, you accept all responsibility for any system damage from running it or any version with typos.

    Other notes: This doesn't actually lock each process to a specific processor, but the system ought to spread the load anyway. taskset --cpu-list $i before the dd if you absolutely have to have that.

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 2 points 3 days ago (2 children)

    Good question. I only know of the nice command, which only manipulates affinity and priority. I wonder how to target multiple cores from the CLI.

  • source
  • parent
  • hideshow 2 child comments