Looks interesting and a really good deal, however there is a very big caveat when using cameras on your bike or car. Remember that they record everything you do and can be used against you as well as to protect you 👍
post
It would be interesting to see how steady the footage is - keep us posted
For the connection to turn on and off with the ignition, there are two red wires with a blue stripe. One is on all the time and the other one goes on and off as required.
This is out of a small four wise fuse box under the riders seat on the RHS.
To check which one you require , pierce with a pin and test the circuit with a meter.
All straightforward after that



It took me a few hours and I also needed to solder a connection to an ignition wire (under the seat) so that the unit switched on and off with the bike.
I mounted the rear camera underneath the offside rear indicator and the front camera above the headlamp
Both give clear unobstructed views.
The controller is under the seat frame so not easily accessible but I connect to the device via WiFi so do not really need access.
There is a switch mounted on the LHS of the bars (stuck to the clutch reservoir) which allows me to save a recent recording (I will have to look at the settings to see how that works but it is in the app).
All seems to function well but that is in the garage!
Quite pleased with how it has blended into the bike and with the clarity (at standstill).
Looking at my photos on this post - it is hard to actually see the cameras but they both have green arrows on them (which are on the top when the camera is vertical).
ohhhh... now you point out the arrows, I see them ! They are tiny...I wasn't expecting that. So, I was going to ask how you hide them from thieves when you park the bike... and whether you remove them... but they are so small and hidden that they don't stand out. Cool.
all 7 comments