Do It Yourself

hideshow 5 child comments

parent

[–] loopy@lemmy.today [S] 1 point 6 months ago (4 children)

Thanks for pointing that out; I was unaware of that. After educating myself a little, it looks like UV light below about 200nm wavelength generate ozone, but 254nm is the sweet spot for killing microbes. The light I got works at the 254nm wavelength.

The US EPA recommends a concentration of less than 70ppb, Canada 40ppb, and the WHO 30ppb. This model has been tested by the California Air Resources Board at 13ppb.

That’s reassuring, but I’m still looking more into this. Do you have any recommended resources for gaining more insight on ozone generation?

https://www.environics.com/2025/02/17/regulations-ambient-ozone-concentration/

https://bioshielduv.com/products/bioshield-magnetic

hideshow 4 child comments

parent

[–] Quexotic@beehaw.org 2 points 6 months ago (3 children)

No, I don't, and I'm sorry, I just have looked into it before myself, and once I looked into it, decided I wanted to avoid it completely, So my research stopped there.

I do have a UV bulb that I've glued into a tote so that I can sterilize things like my CPAP. After that I will air it out for a very long period of time to make sure that all of that stuff is gotten out.

One thing that I can tell you that I've learned from what I've researched is that the more air that flows over the bulb, the more ozone will be generated. So if it's just sitting there not doing anything in still air and it's producing a certain amount, having it in your AC unit might produce more. So that might be an angle you might want to look into.

Practically speaking for an AC unit, what I think would be really useful is to be able to turn it on at the beginning of the season to kill whatever bacteria might be in there, or to just be able to periodically turn it on.

hideshow 3 child comments

parent

[–] loopy@lemmy.today [S] 1 point 6 months ago (2 children)

Huh, I hadn’t thought about turning the light on for short periods. And if ozone is mostly generated with moving air, then turning the light on with the furnace off seems to be safest. Thanks for the suggestion.

hideshow 2 child comments

parent

[–] Quexotic@beehaw.org 2 points 6 months ago (1 child)

If your intent is to sterilize the coils so that they can't grow anything funky, then yes, probably that would be for the best.

Also, you could certainly test it by setting it to turn on when the furnace is on so you can see how stinky the ozone is. If it smells kind of strong, then that's probably too much, right?

parent

hideshow 1 child comment

[–] loopy@lemmy.today [S] 2 points 5 months ago

I had it on for a few days straight and it didnt smell at all. But I think to be safe, I’m going to keep it unplugged and then run it for couple of hours each month (with the furnace turned off).