1
 
 

A quick 20m battle report this time.

2
 
 

Another battle report. This one took a significant amount of time to edit but I've improved my tooling a lot in the process. Keep an eye out for my next devlog about it.

3
 
 

Rolled 44, the Poison Swamp. Igorri vs Goregrinders. I was getting rekt as Goregrinders under the opponent over-extended their necromancer and my berserker went absolutely insane nuts with 7 damage in one turn through rip and tear with 2 strength

4
 
 

Hopefully I can covert some new players 😁

5
 
 

Here's my second Maleghast Battle Report. This time with less rules mistakes.

I've also published my blogpost on how I make these battle reports if you're interested in the nuts & bolts]

Tell me what you think!

6
7
 
 

As promised, here's my first Maleghast battle report.

I made this using python, and kdenlive. Soon I will write another devlog on my workflow for anyone interested.

It took me a lot of hours to figure kdenlive out and create the relevant scripts to generate the units. Obviously it's very amateurish compared to other editors, but I think it's ok for the first attempt. Do let me know of your suggestions for improvement.

8
 
 

Stay tuned.

9
 
 

Another game with a newbie. This time they played Abhorrers and I played Igorri. My Lycan fed very well today due to the 4 Stiches acting as canon fodder, then using Flesh Jump, I teleported it in, using Flesh Jump. It was a glorious bloodbath!

10
 
 

Hint: You can comment directly with your lemmy account by visiting the post from your instance, like so: https://lemmy.dbzer0.com/post/72027414

11
 
 

Hint: You can comment directly with your lemmy account by visiting the post from your instance, like so: https://lemmy.dbzer0.com/post/71978395

12
 
 

This time using my new condition and activation chips to keep things organized. With a brand new player to both maleghast and wargames, it took less than 1.5 hours for a playthrough which is perfect. I'm expecting with experienced players a round would take like 1 hour.

Btw, I have a question: According to the rules, Strength tokens are removed after you do damage. However strength tokens aren't applied to grazing damage. Do you still remove them after you do grazing damage? What if the grazing is blocked by armor? I assume not to both questions.

13
 
 

I run into quite a few questions on my first play-through of the game. Some of them the discord community helped answer, and some remain.

To help others which might run into the same, I compiled all the answers I got into an unofficial FAQ. Hopefully it will help you and hopefully it will incentivize Tom to tighten up the rules explanations in a future update.

14
 
 

Deadsouls vs Gargamox (I was garg).

Opponent was trying to wall me away, but I didn't remember one can just destroy walls :D We did a lot of mistakes for our first game, but it was nevertheless fun!

15
 
 

The other day I posted my unit poker chips but I wasn't happy that the Tyrants were at the same size, so I went back to the drawing board and used my tile technique to create 2x2 tyrant tiles. To do that, I needed a border around them to know where to cut. However I liked the way they turned out with the border so much, I decided to redo all my poker chips to have the same border as well. The rest of the creation process stayed identical as the other post (other than needing to remove the previous label which was a PITA)

And with this, I have almost all components done so here's a Proof-of-concept photo

16
 
 

My project to make Maleghast easily playable on the tabletop continues. For Unit chips I decided to go with poker chips instead of 3D printing my own miniatures.

I went with chips because it allows me to display unit information for the opponent directly on the table, rather than having to remember everything or refer to the unit cards all the time. For this purpose, I used G.I.M.P. to add the basic unit information directly on each unit image. Now it becomes very easy when you're deciding what to target to easily view all most relevant information.

As a sidebonus to that, the other side of each unit has a corpse image, so when a unit dies, all I have to do is flip it upside down, and it becomes a corpse on the battlefield. And if I need more corpses, all I need to do is use some of the unused unit chips.

For the poker chip creation, I used the process described here. For reference, these are the supplies I bought from German Amazon given that this guide was built for the USA market.

  • Poker Chips: These chips are very affordable and have satisfying weight. You need to remove their internal label to allow proper adhesion of the unit labels, but that's easily done with an x-acto knife.
  • Hole Puncher: The poker chips have a 2.9cm diameter internal space so this one works best, but I've found you're better off printing the units at 2.8cm to avoid cutting off some edge art.
  • Tweezers: To pick up unit labels without getting fingers sticky.
  • Glue Spray: This is the one suggested by the original guide. Loos like it works well enough as I can variate the spray strength as as to not send the card pieces flying.

For the unit printing, I created a custom python script which takes all the images in a directory, resizes them and places them in A4 PDFs, which I can then send to my printer. If anyone is interested I can share.

For now I prepared only one of each unit of the 6 core factions as I run out of chips. Now that I know it's working, I ordered some more so I can prepare the 3 games-for-freaks factions plus the mercenaries, as well as prepare extra chips for each unit, so that people can mix their own warband format (instead of taking one of each).

PS: Yes I know the Tyrants are the same size. I haven't yet decided how to handle this. I'm going to see if I can find larger poker chips. Or maybe I'll 3D print just the tyrants.

17
 
 

I'm trying to figure out a way to play Maleghast on the tabletop and I came with the idea of converting the unit cards into cards one can hold on the side of the table, rather than keeping the printouts open.

This design also works very well for unit upgrades as well. All I need to do is use a paperclip to mark which upgrades that unit has unlocked using dark power.

This is my first printout from my personal printer, so colors are not great. Looking to get a more professional print.

What do you think?

PS: Ignore the bad upgrades on Enforcer, I've fixed that already