[–] [M] 2 points 1 year ago*

This isn’t an issue related to GenP. The error typically occurs when Photoshop is unable to access the internet to load or validate certain components.

Ensure that Photoshop has full internet access. Also, check that the Photoshop process is listed under Add-ons in the CC app, this ensures all required components are properly loaded.

Blocking Photoshop via your firewall can prevent necessary modules from being downloaded during startup. Instead of fully blocking access, consider using WinTrust, modified hosts, or temporary workaround method, all suppresses popups while still allowing network connectivity.

Keep in mind that certain features in Photoshop, and other Adobe apps, require an active internet connection. For this reason, restricting access via a firewall should only be a last resort, as it can break functionality or trigger errors such as the "Remove Tool Component" issue.

Lastly, as clearly stated in the Compatibility List, Beta apps are not officially supported. They are prone to issues that are typically resolved before reaching general release.

As mentioned in the Adobe Community, if you had done a bit of research, you would find many threads discussing this issue, like this one here for starters is a good place to start. Otherwise post on the Photoshop Subreddit for more help .

  • source
  • [–] [M] 1 point 1 year ago* (last edited 1 year ago)

    This is the only official distribution method available here. You can download either the Binary, Source, or Torrent versions.

    To ensure you’re using the latest release, choose the Binary (precompiled) package or the Source version, which you’ll need to build manually.

    The Torrent option, covered in the guide, may contain a previous release, so make sure to check the version before downloading.

    Any external or unofficial links are removed in accordance with GenP Rules, as all downloads and instructions must come directly from the official guides and resources to prevent outdated or misleading information.

  • source
  • parent
  • context
  • [–] [M] 1 point 1 year ago* (last edited 1 year ago)

    This issue is thoroughly addressed in the GenP Guides, make sure to read them fully and carefully, especially Guide #2 – GenP.

    Pay particular attention to the Important Note at the start, which highlights the sections "Recommended Browser Setup for Downloading GenP" and "GenP Distribution Formats Explained." These sections are also mentioned again within the guide steps themselves. It's crucial to read everything fully and avoid skipping sections.

    Errors such as "This site can't provide a secure connection" or "Invalid response" are typically caused by network restrictions or antivirus software blocking the site or download, preventing a proper connection. These issues are already addressed in the relevant sections of the GenP Guides, which include detailed troubleshooting steps.

    To resolve this, check your network and firewall settings, temporarily disable or whitelist the site in your antivirus software, and if the issue persists, try switching to a different DNS service or using a trusted VPN to rule out local or regional network filtering.

  • source
  • [–] [S] 2 points 1 year ago* (last edited 1 year ago) (1 child)

    I clicked this link on the wiki page part of the guide on how to download it. Is there another way to get the latest version officially??

  • source
  • [–] [M] 2 points 1 year ago

    Premiere Pro just needs to be unpacked first before patching, and then patched as usual, as outlined in the GenP Guides. If you follow each step, everything should go smoothly. There was no need to have run GenP twice, as the first patch was applied correctly, and it won’t overwrite anything if you run it a second time. That's why you received the "already patched" message on the second run.

    The Accept Terms popup is treated the exact same way as the Unlicensed popup, both of which are non-AGS-related. You should not click Accept, since doing so means agreeing to Adobe's terms, and because you're using a non-genuine version, it's no surprise that you encounter the Unlicensed popup afterward.

    All apps, except Acrobat, can have WinTrust run on them. You just need to go to WinTrust and trust the app. After trusting the app, you’ll need to restart for the changes to take effect; otherwise, nothing will change. Whereas you untrusted it, which would explain why it didn’t work for you.

    As clearly mentioned in the GenP Guides and Troubleshoot Section, some users may experience issues with Premiere Pro or After Effects. In such cases, simply untrust the app if WinTrust was run on it. Then, revert to the previous methods, such as modifying the hosts file or using a firewall rule.

    Start with the hosts file, and if the latest lines don't resolve your issue, you use the third-party method to identify additional domains being used by Adobe. Once identified, report them, wait for the list to be updated, and then update your hosts file manually or automatically, depending on your setup. If you use the additional domains method, keep in mind that Adobe changes these domains daily, so you'll need to check for updates regularly. Alternatively, you can block the app through your firewall instead

    Important Note: Always open Premiere Pro directly from its own .exe (located in the app's installation folder), desktop shortcut, or taskbar pin, rather than searching for it through the Windows search bar. While the search bar should still launch the .exe, it can sometimes trigger the CC app instead, potentially causing issues with the patched version.

    All of this is thoroughly covered in the GenP Guides and Troubleshoot Section, which you should always refer to for the most up-to-date information, rather than relying on outdated posts about other apps. Always check and follow the guides, as they are regularly updated to reflect the latest solutions.

  • source
  • [–] [M] 1 point 1 year ago*

    After updating any app, it's important to unpack where necessary and repatch them again with GenP. You haven't mentioned doing this in your post.

    When an app opens and immediately closes, it's usually a clear sign that it hasn’t been patched properly, or not at all.

    Regarding the non-AGS-related popup, this is already covered in the Troubleshoot Section. All apps except Premiere Pro generally work fine with just WinTrust run on them, no need for modified hosts or firewall rule.

    As noted in the Troubleshoot Section, Premiere Pro may behave differently for some users. In those cases, sinply untrust if already run WinTrust on it, switch to using a modified hosts file, firewall rule, or applying the temporary workaround should resolve the issue.

  • source
  • [–] [M] 2 points 1 year ago

    There are no issues with Acrobat when it is properly patched.

    If the app crashes immediately upon opening a PDF, first ensure that the patching process was completed successfully. This is a common step that can be overlooked.

    If Acrobat continues to crash even after confirming it's patched, the issue is more likely to be in-app or system-related, rather than a GenP issue.

    This type of crash is often caused by corrupted app files, conflicting system processes, or outdated/corrupted user preferences.

    We are not an alternative form of Adobe Support and only assist with GenP-related matters. For anything outside of GenP, post on the Acrobat Subreddit or search the Adobe Community for similar discussions.

    To resolve persistent problems, it's recommended to use the Acrobat Cleaner Tool to fully remove the app. After cleaning, restart your system and reinstall Acrobat via the CC app for a clean setup, repatch with GenP once fully installed again.

    Regarding blocking, it's not necessary to use both a modified hosts file and firewall rules, using one method is usually sufficient.

    The hosts file is generally preferred, as it allows continued internet access for other features. However, you may need to manually find additional domains if the latest list doesn't fully cover you.

    Firewall rules are more restrictive and should be considered a last resort. When properly configured, they don’t require any additional blocking measures.

  • source
  • Ensure that the app is properly installed and fully patched to begin with.

    As in some cases, users simply find that Acrobat hasn't been patched or patched incorrectly.

    Otherwise, ensure that it's kept up to date so that there are no issues.

    Adobe typically releases updates once or twice a month.

    Always remember that you need to repatch with GenP after updating the app.

    Any issues with popups in Acrobat Pro, you just need to use modified hosts file, firewall, or temporary workaround method.

    All of which are clearly explained in the Troubleshoot Section.

  • source
  • [–] [M] 2 points 1 year ago*

    Monkrus includes his FAQ Section directly on the torrent tracker page for each specific app, so even if the website is down, you can still access the relevant instructions from the torrent tracker itself.

    Regarding WinTrust, the GenP Guide is useful for understanding what it does, but keep in mind that it’s written for GenP users specifically. To apply WinTrust correctly with Monkrus releases, you’ll need to follow the method outlined in the FAQ Section for that particular app on the torrent tracker instead.

    As for the Crack+ folder, it’s located in the root of the disk image. In simple terms, that means it’s in the top-level directory you see when you open or mount the installer image, alongside Adobe’s own folders. If you browse through the mounted disk image, you should be able to find the Crack+ folder easily.

    Additionally, unlike Monkrus, you also have a detailed reference section available, the Monkrus Setup, Troubleshooting, and Best Practices Guide. That’s worth checking as it expands on common issues and provides step-by-step solutions.

    Otherwise, since this isn’t a GenP-related issue and you’re running into problems with Monkrus’s own methods, you can always sign up on his mirror site and comment there directly.

  • source
  • That’s right, being unsigned is one reason the file triggers warnings.

    To add context, PUA:Win32/Vigua.A isn’t a specific virus but a generic Microsoft Defender label for Potentially Unwanted Applications.

    It often shows up on patchers and similar tools because of the way they modify other software, so in this case it’s most likely a false positive.

  • source
  • parent
  • context
  • [–] [M] 7 points 1 year ago

    Everything you need on this subject is already covered in the GenP Wiki, GenP Guides, and the GenP Setup, Troubleshooting, and Best Practices Guide.

    These explain in detail why GenP (which is simply a patcher) often triggers false positives in antivirus scans.

    The detection PUA:Win32/Vigua.A is a generic Potentially Unwanted Application (PUA) label used by Microsoft Defender.

    It does not identify a specific virus; instead, it’s a broad classification applied to files or tools that display behaviours Microsoft considers potentially unwanted.

    For example, modifying other software, running unsigned executables, or exhibiting patcher-like behaviour.

    In short, this is expected behaviour with tools of this type, and the detection is a false positive.

    If you want to know more about PUAs in general, Microsoft explains it in detail here.

  • source
  • [–] [M] 2 points 1 year ago

    This is just a variant of the Unlicensed popup, which is non-AGS-related and is already covered in the Troubleshoot Section.

    Follow the appropriate method given there, as that should resolve it.

    If that doesn’t help, make sure to also check the Announcements channel in GenP Revolt for the latest updates regarding certain apps.

    As for some apps, WinTrust isn't working for them, and you may need to fall back to using previous methods of modified hosts or firewall rule.

  • source
  • Monkrus torrents are not related to GenP, and we do not provide support for them.

    Monkrus torrents do have plenty of seeders and leechers, and seeders should be readily available for the torrents. Keep in mind that older releases may naturally have fewer or no active seeders over time, but the latest versions do all have active peers.

    If you are attempting to download a recent release and still see no seeders, the issue is most likely with your own torrent client or network setup. Common causes include blocked ports in your torrent client, ISP throttling of peer-to-peer traffic, or firewall/router restrictions preventing connections. In such cases, the torrent itself is fine, adjusting your settings or checking your network configuration should resolve the problem.

    Finally, remember that these are Monkrus torrents and have nothing to do with GenP. If you are still struggling, you will need to post your query directly on Monkrus own website for support.

  • source
  • Both the Binary and Source downloads are working exactly as intended.

    Binary already contains GenP as a precompiled and ready-to-use .exe file. No building or compiling is required.

    Source contains the raw project files for manual building. If you want to generate your own .exe, you need to run run_build.bat as Administrator, which will automatically compile GenP. This option is intended for advanced users who wish to inspect or build the program themselves.

    This is explained in detail in the GenP Guides under “GENP DISTRIBUTION FORMATS EXPLAINED”, which you mentioned reading.

    What is most likely happening in your case is:

    • Antivirus interference: Many antivirus programs block or quarantine GenP .exe (this is common since it is a patcher). You should temporarily fully disable your antivirus before downloading, extracting, or running it, or preferably whitelist it.

    • Incomplete or improperly extracted files: Make sure the download completes fully, and that you extract all files from the ZIP before attempting to run.

    If you want to avoid building anything, always use the Binary release, as it is already compiled and ready to run. The Source release is only for those who specifically want to build GenP themselves.

  • source
  • [–] [M] 3 points 1 year ago

    Most likely, you are getting the common Unlicensed popup, which is non-AGS-related and is covered in the Troubleshoot Section.

    If you've followed the instructions for Premiere Pro and ran WinTrust as directed, the non-AGS-related popup should be resolved.

    However, if the popup shows Adobe Genuine Service Alert at the top, it is AGS-related. In that case, using Remove AGS, or one of the three fallback methods, should resolve it instead.

    If you're still encountering the problem despite following the steps correctly, try copying the appropriate file from Media Encoder. Alternatively, you may need to revert to older methods, such as modifying your hosts file or blocking the app in your firewall.

    Everything you need is already covered in the GenP Guides and the Troubleshoot Section, if you refer to it.

  • source
  • [–] [M] 3 points 1 year ago*

    This issue has already been addressed on GenP Revolt.

    Some users have reported that Acrobat Pro is showing popups again after being used for some time.

    These are non-AGS-related popups, either the Accept Terms or Unlicensed popups, which are the same as appeared previously.

    If patching does not resolve it, you’ll need to fall back on either hosts or firewall rules.

    This is already covered in the Troubleshoot Section for both hosts and firewall.

    If updating your hosts file with the latest entries doesn’t resolve the issue, then use the third-party method to identify any additional domain being used.

    If no additional domain are found that you can report through the appropriate method, then you will need to block Acrobat through your firewall.

    Note that, as clearly stated in the Troubleshoot Section, Acrobat requires three files to be blocked, not just one.

  • source
  • [–] [M] 1 point 1 year ago* (last edited 1 year ago)

    First of all, since you're using the Monkrus method for Adobe, this issue isn't related to GenP. We do not provide support for Monkrus versions, as they are only covered here for installation purposes and basic help. If you are encountering problems, your best course of action is to post your issue on the Monkrus website under the app's own comment section.

    Also, why are you using Monkrus versions, which are already prepatched with the same GenP files and methods, and then using GenP on it? This is something that should never be done.

    As mentioned in the GenP Wiki, mixing GenP and Monkrus versions is never recommended. Running GenP on a Monkrus installation is something that should never be done as it can lead to problems down the road. GenP allows Adobe to run in its normal, unaltered form, with minimal changes. Monkrus, on the other hand, customises Adobe to work as a standalone app, removing more files in the process. A lot more files are blocked and renamed with a .bak extension.

    To fix this, we recommend starting fresh:

    • Use the Acrobat Cleaner Tool to completely uninstall Acrobat.

    • Restart your device.

    • Reinstall Acrobat using the Monkrus method only.

    Do not mix GenP with Monkrus, and never run GenP on Monkrus versions.

    If you want to switch to GenP for your installation, you’ll need to completely uninstall all of your Monkrus Adobe app versions first to ensure no remnants are left behind. For this, you can refer to Guide #4 - Full Clean to help ensure that you fully remove the Monkrus installations. Afterward, you can proceed with a fresh GenP install.

    Regarding PDF/A, PDF/X, and PDF/E Saving:

    Both the GenP and Monkrus methods install all apps using the trials version, which is then patched to simulate a genuine copy. However, Acrobat's optional features, such as Preflight and the ability to save in PDF/A, PDF/X, or PDF/E formats, are only available with a genuine, fully licensed subscription. These features are not included by default in the trial installation because the trial version is designed to provide only the core functionality of Acrobat, with premium features locked behind a paid license.

    In order to access features like Preflight, PDF/A, PDF/X, and PDF/E, a user must either purchase a subscription or go through a custom installation process that enables these optional components. This custom setup isn't possible with Monkrus versions, as they are stripped-down installers that rely on prepatched GenP files and methods to make the apps work. As these are ready-made all-in-one installers, the installation, patching, and modification process can't be separated in the Monkrus setup.

    If you want access to those features, you would need to install Adobe through GenP. Ensure you uninstall your current Monkrus installation first to avoid issues. Once all of Adobe through Monkrus is fully removed, you can then start a clean Adobe install again using GenP method instead. Then once you have Acrobat installed and patched, you can follow the appropriate steps to enable these features.

    Finally, as this issue pertains more to Adobe-specific features, we recommend visiting Adobe's support pages for more details:

    How to Convert PDF to PDF/A.

    Using PDF/X and PDF/A.

    Print Production Tools Overview.

    Preflight Profiles in Acrobat.

    You can also search the Adobe Community or the Acrobat Subreddit for similar discussions.

  • source
  • [–] [M] 2 points 1 year ago

    First, ensure you're referencing the correct error codes, as you've mentioned both Error 304 and Error 303, which are separate issues with different causes and solutions.


    Error Code 303: Unable to install the product

    Adobe's Definition:

    Error code 303 indicates an installation failure.

    Solution (Adobe):

    Select Retry to download and install the app again.

    Additional Notes:

    This often happens due to corrupted files or blocked installation processes.

    If you're using GenP or have modified Adobe services or background processes, ensure that nothing critical is blocked or disabled.

    A full reinstall of the CC app may resolve the issue.


    Error Code 304: The installation is no longer functional

    Adobe's Definition:

    Error code 304 indicates that the installation is no longer functional. If Solution 1 doesn't resolve the issue, try Solution 2.

    Solution 1 (Adobe):

    Download and install the latest version of the Creative Cloud desktop app, and try again.

    Solution 2 (Adobe):

    Install the latest digital certificates manually:

    DigiCert High Assurance EV Root CA.zip

    DigiCert Trusted Root G4 certificate.zip

    After extracting, install these certificates into the Trusted Root Certification Authorities store.

    Additional Notes:

    This error may also occur if previous patches have corrupted the CC installation or if Adobe services, background processes, or certificate access have been blocked (e.g. via hosts file or firewall edits).

    If that’s the case, restore default system behaviour, clean up Adobe entries in the hosts file and firewall, then perform a fresh install.


    Additional reasons why Error 303 or 304 may occur:

    • Expired or invalid digital certificates.

    • Interference from security software (antivirus, firewall, etc.).

    • Network issues or proxy/VPN settings blocking downloads.

    • Corrupted installation cache or temporary files.

    • User Account Control (UAC) or permission issues.

    • Conflicts with other software or system components.

    • Corrupted or outdated saved credentials in Windows Credential Manager.


    Suggested Additional Troubleshooting Steps:

    • Clear the Creative Cloud cache by deleting the contents of the %AppData%\Adobe\OOBE folder.

    • If present, also clear the %LocalAppData%\Adobe\Creative Cloud folder. (Note: This folder may not exist on all systems.)

    • Temporarily disable antivirus or firewall software and retry the installation.

    • Verify your network connection, and try switching networks or disabling Proxy/VPN settings.

    • Run the installer with Administrator privileges explicitly, even if logged into an Admin account.

    • Ensure Windows Updates are fully installed and your system is up to date.

    • Check for a corrupted user profile as rare profile issues can interfere with app permissions or installs.

    • Check Group Policy restrictions as managed systems may block Adobe installs or services.

    • Check folder and NTFS permissions to ensure %ProgramFiles% and %ProgramData% aren’t restricted.

    • Avoid registry cleaner issues as these tools may remove critical Adobe-related entries.

    • Ensure Adobe Desktop Service is running and restart it via services.msc if needed.


    These issues are covered in the Troubleshoot Section of the guide. Be sure to carefully follow all instructions under CC App Errors.

    Steps to try:

    • Restart your computer, as sometimes a simple restart resolves the problem.

    • Undo any background service modifications, especially if you followed Guide #8, revert any changes blocking Adobe processes.

    • Check your hosts file and firewall and ensure no Adobe-related entries are blocking connections.

    • Ensure sufficient free disk space as lack of space can cause silent installation failures.

    • Use the CC App Uninstaller Tool and run as instructed to repair or uninstall the CC app.

    • Restart and repatch using GenP v3.6.9; after repair or uninstall, always restart before reinstalling or patching with GenP v3.6.9 again with Administrator privileges.

    • If issues persist, fully uninstall the CC app, restart, then reinstall and repatch with GenP v3.6.9 using Administrator privileges.

  • source
  • [–] [M] 2 points 1 year ago

    Monkrus is simply prepatched using GenP files and methods, so you'll get the same end result with Substance Painter regardless of whether you use GenP or Monkrus.

    This is already covered in Monkrus own FAQ Section on the torrent tracker for Substance Painter, as well as in our GenP / Monkrus Setup, Troubleshooting, and Best Practices Guide.

    The GenP Wiki line you quoted is correct, but it refers to the standard content that comes with Adobe CC itself, for example, the additional speech-to-text language packs for Premiere Pro.

    With Monkrus, those packs are stripped out and provided separately as a 13GB+ torrent, so users need to download both the Premiere Pro torrent and the corresponding Speech to Text pack torrent if they want that functionality.

    For Substance Painter specifically, the assets you're referring to are not part of the default Adobe installation package.

    They are distributed separately through Adobe's Substance 3D Assets platform (previously called Substance Source), which is an online library that requires authentication against an active Adobe subscription.

    These materials and textures are not bundled locally with the installer; instead, they are streamed or downloaded directly from Adobe's servers on demand, tied to the user's Adobe ID and licensing status.

    Because of this, patched installers such as GenP or Monkrus cannot provide access to the full library, only the core application and whatever standard content is included offline.

    While Adobe does make a small selection of free starter assets available, the full collections (like the 14,000+ texture library you mentioned) remain gated behind a valid subscription.

    It’s worth noting that there are two official sources of assets:

    • Substance 3D Assets (formerly Substance Source): Premium and free assets. Most require an active Substance 3D subscription.

    • Substance 3D Community Assets: 100% free assets shared by the community, available to all Adobe accounts (even without a subscription).

    So while you won't get the full library without a subscription, you can still access a limited set of free assets plus everything shared in the community collection.

    As noted, all of this is already explained in both the Monkrus and GenP documentation.

  • source
  • [–] [M] 2 points 1 year ago

    This has already been discussed and answered in a previous post here, as well as in several other threads on GenP Revolt and in the Announcements channel.

    As for Revolt itself, that’s something you’ll need to sort out on your end. Either Revolt is experiencing delivery issues, your email provider is blocking the messages, or they’re being filtered into your spam/junk folder. Some users have also reported that switching to a different email provider resolved the problem when their main one wasn’t receiving messages.

    This is not related to GenP, it’s entirely a Revolt issue. If you’ve already checked everything and still aren’t receiving the authentication email, your next step is to contact Revolt support directly.

  • source
  • [–] [M] 2 points 1 year ago

    There have been no widespread issues with Photoshop v26.10 when repatched with GenP v3.6.8.

    For most users, updating and repatching worked fine with no issues.

    However, a small number of users have experienced problems, so adjustments were made to address those cases.

    If you are encountering issues, updating to GenP v3.6.9 and then restoring and repatching Photoshop should resolve the problem.

    Alternatively, you can perform a full uninstall, reinstall, and then repatch using GenP v3.6.9.

  • source
  • [–] 0 points 1 year ago* (last edited 1 year ago)

    This issue has already been addressed on GenP Revolt.

    For users for whom the normal method of unpacking and patching does not work, the alternative method should be followed: Patch as normal, open and close After Effects once, then unpack and patch the required file. If problems persist, a complete uninstall and reinstall (following the instructions carefully) may be necessary. When done correctly, there is no need to remove any additional files.

    It is also not recommended to delete Microsoft.AI.MachineLearning.dll. This is a real Microsoft library that provides a Windows interface for ONNX Runtime / Windows ML. Apps such as Premiere Pro and After Effects rely on it to accelerate AI/ML tasks locally, for example, features like Auto Reframe, Scene Detection, Content-Aware Fill, or Neural Filters.

    Regarding the linked post, it was made by the same user who previously posted about this on GenP Revolt. It is not their original solution, they copied it from a comment in the Monkrus app section and presented it as their own. We do not condone or promote users who take credit for other people's workarounds.

    To clarify, Monkrus simply prepatches his releases using GenP files and methods. As a result, Monkrus versions already contain the files in an unpacked state. This means users of his versions cannot perform the unpacking step after installation in the same way that GenP users can. Therefore, GenP users do not need to delete any additional content in order to get After Effects working correctly.

  • source
  • [–] [S] 1 point 1 year ago

    Clarification: I have some cracked plugins, could they be the issue — but an issue here is that even if I run them AE 2025 safe mode, it still does the scanning shenanigans.

  • source
  • [–] [M] 2 points 1 year ago*

    Make sure you read the step in full, as your issue is already addressed there.

    This error will occur if neither After Effects nor Premiere Pro are installed, since these are the only two apps that are required to be unpacked, no other apps need this step.

    If you have the path set correctly and either of the two apps are installed, the app selection window would pop up, allowing you to choose whether to unpack.

    If you see the "No file(s) found" message, that means neither After Effects nor Premiere Pro are installed on your system.

    No other apps will be listed, so if neither of these two apps exists, GenP will not find anything and move onto the Log tab.

  • source
  • view more: ‹ prev next ›