[–] [S] 1 point 2 months ago* (last edited 2 months ago) (1 child)

like you are using the router for internal DNS, did you set all the services to point at caddy?

That was the answer! I had it pointed to the services, but once I set them to point at Caddy, it all worked. I cannot believe it was such a simple fix and also that I never picked up on that in all the guides/tutorials/videos I watched about this. Thank you!

  • source
  • parent
  • context
  • [–] [S] 1 point 2 months ago

    Yes, I probably did. I am familiar with computers, but know next to nothing about networking. So I was trying a bunch of various things I could find to try to get it to work. the proxmox ACME did not get me certs for my server or for a vm of proxmox so I abandoned that method and tried caddy and GoDoxy but never got them to get certs for services after various attempts. So I reached out here since there are many more people smarter than me here.

  • source
  • parent
  • context
  • [–] [S] 1 point 2 months ago

    I’m your router / Pihole locally, you setup the above URLs to point to the IP of caddy This is what I must be doing wrong. I have my router point to the url for the lxc services. So it is supposed to point to caddy. Thank you for the tip. I will try it out!

  • source
  • parent
  • context
  • [–] [S] 1 point 2 months ago (3 children)

    I use porkbun and I do the DNS challenge. I know it succeeds because proxmox gets https perfectly fine. But none of my lxc containers get https after doing DNS challenges for them. Not sure what I am doing wrong since I clearly did it right at least once :/

  • source
  • parent
  • context
  •  

    I have a minipc with proxmox on it. I have tried caddy in a lxc to set up DNS challenges to my owned domain and I set the url in my router to point to the IP (for example, proxmox.DOMAIN.com could be 192.168.10.22). The hope was to have everything local within my house and nothing needs the internet to be accessed. Some services I can host in proxmox NEED https to use, which I could not get working with my own certs or ones proxmox could make, thus Caddy. However, I get proxmox with a proper cert, but i cannot get any of the other services from proxmox working. If I were doing it all manually, I would expect DNS issues with the domain, but from what I understand, Caddy by default does wildcard domains which should mean that my services should work. but they do not. Networking is new to me so perhaps I am missing something obvious. Any guidance would be appreciated.

    EDIT: You guys helped me find my issue! Turns out that I did everything right except for 1 simple step. Once I have everything set up, I have my router point the urls to the CADDY address, not the services address. For example, I had bookmarks.DOMAIN.com set in my router to point at the readeck lxc ip and it didn't work. Changing that to the Caddy ip fixed it. So all my services would point to the same ip (caddy). I do not know how I never saw this in any of the tutorials/videos/guides I checked, but THANK YOU for pointing it out to me.
    Now the only odd thing is why does the proxmox ip work fine without pointing to caddy? I will leave it as is, but its the odd one out :/

     

    I have an sv08 and it got hurt by static electricity so I had to replace the toolhead. But since I replaced it, the printer has been unable to print acceptably. I talked to sovol and replaced all the wiring between the toolhead+motors and mainboard but the attached pictures shows how it prints now. it does a lot better than it did, but its current status is strange. How come half of it is smooth and half is crazy? It would make sense it just x or just y direction was messed up, but it's half of both...

    [–] 2 points 1 year ago

    I liked Trilium but I use low end android devices and it did not like low resource devices. Same for Joplin too. If you do not have that issue, I thought Trilium Notes was very nice.

  • source
  • [–] 1 point 1 year ago

    I used wallabag and liked it. I stopped when I had to move my server and backed up the data. I installed wallabag again and the backup would not work with the latest version. I had exported it in various ways as well, just in case one didn't work well but none worked. So that left a bad taste in my mouth. This might have coincidentally happened right in a database upgrade or something inbetween the 2 versions, but the fact that my backup could not be used frustrated me. Still looking for an alternative and am considering readdeck like you. I tried it a while back and did not see a way to export data at that time (I think it could have been done from command line though?). Been over a year since then so maybe that has changed. Right now I am using Shaarli for bookmarks and it works. It doesn't stick for me like wallabag did though.

  • source
  • [–] 1 point 1 year ago

    I have tried all of them and yunohost is the best for me. I have been able to test self-hosted software that I could not otherwise. Cosmos and CasaOS work for many people, but they did not use some of the software I wanted to try; when I tried to set up a docker image of those pieces of software, it did not work. I understand that it was my failure to understand docker that failed here, so if you know docker, these might be much more useful to you.

  • source
  • [–] 0 points 1 year ago (2 children)

    That was my first thought as well, but I think he means things, not time. You miss this thing and that as you stare at your phone. So in that second of mindless scrolling, you missed things around you that might have added something to your day, to your life. So 'how much of your life do you let pass by' is not asking how many seconds of life did you let pass by (though that is the first thought upon reading), but 'how many things that could have affected your life- for the better or worse- do you let pass you by?'

  • source
  • parent
  • context
  • [–] [S] 1 point 1 year ago (1 child)

    Here are some more pictures, with better lighting.

    1. Layering
    2. Top Layer
    3. Decided to check if I could peel it. Yup, it was easy.

    The printer is a Sovol SV08, which is a corexy printer with pla. I use Freecad to design the parts and OrcaSlicer 2.3.1 to slice it. It is in my room on a desk in the open air and I have a fan running in the room. Several people have mentioned it cooling too fast, so I am suspecting that fan being the issue...

  • source
  • parent
  • context
  •  

    I am new to 3D printing and I am not sure how to troubleshoot printing issues. In this post, I have a specific issue I cannot figure out and would love help diagnosing it. But I would also welcome beginner friendly resources to determine what the issue is and how to address it. I like gardening and with plants, you learn a method of identifying issues and working your way to ID the problem so you can narrow possible solutions. Example: I have a plant that looks unhealthy.

    1. What about the plant looks bad? a) yellow leaves
    2. is the leaf yellow or the veins in the leaf yellow a) leaf is yellow, the veins are green
    3. are the older leaves yellow, the younger leaves yellow, or ALL leaves yellow? a) younger leaves
    4. likely an iron deficiency.

    So now I know the issue so I can then look at the various options that would address that issue, likely starting with the simplest option and trying more complicated ones as the simple answers don't solve it.

    If there existed resources that could guide me like that for 3D printing I would be grateful!

    Now, onto my current issue. I have a model I made that has some layering issues that make it easier to pull apart than it should. But the weird thing is it only happens to larger prints. I have tested this pretty easily because I have been making simple shapes will learning how to do parametric modeling. In the smaller shapes, the print is SOLID. But when I change 1 parameter to make it longer, the print is more brittle and the layers are not as clean as the shorter version. The top layer is also not as clean as the shorter version. The practice object I am making is basically 2 connected rectangles with one taller than the other. I printed several with 30mm length and they printed fine. When I change the length to 300mm, it prints poorly. That is what the picture I attached shows. I have tried printing several times on different parts of the plate, thinking maybe there is a part on the plate that is not flat, but the is not solved that way. The brittleness seems pretty clear to be a layering issue, but I am not sure what they layering becomes an issue when the object becomes longer...

    EDIT: Looks like I should provide more info. PRINTER: Sovol SV08, a corexy printer. It is new because I was scared a used printer might have issues I couldn't diagnose since I don't know 3d printers. MATERIAL: PLA SOFTWARE: FreeCAD for designing, OrcaSlicer for printing. LOCATION: Open air in my room with a ceiling fan running all day (which apparently might be part of the problem here?)

    Here are some more pictures, with better lighting.

    1. Layering
    2. Top Layer
    3. Decided to check if I could peel it. Yup, it was easy.