I've been using my running headphones with my newest phone for a while now. They are okay, but hurt my ears after a few hours. The most comfortable headphones I have are old Shure SRH440... which only have a wired connection.

I found a USB to 3.5mm audio adapter on AliExpress (apparently from BLUEKAKA):

https://a.aliexpress.com/_EvvyelY

I also needed a 3.5mm to 2.5mm audio cable, since the one from the headphones are a huge coiled affair designed to prevent kinks in the cable... great for recording in a studio but not very handy when walking the dog.

After hooking everything up it seems to work well. Yay!

Anyway, I was just carrying everything around loose until I realized that it was small enough to just strap onto the headphones. I used a hairband that my wife left lying around to attach the adapter.

It looks really janky, so I'll probably 3D print a nicer looking setup eventually.

all 17 comments

sorted by: hot top controversial new old
[–] 12 points 6 months ago (1 child)
  • [–] 5 points 6 months ago (1 child)

    You can probably buy a replacement cushion for it too.

  • source
  • hideshow 1 child comment
  • [–] 4 points 6 months ago (4 children)

    Is the sound quality any good? I bought one of those cheap BT audio jack's one time for a similar project and the audio was tinny and laggy and made the whole idea a complete bust.

  • source
  • hideshow 4 child comments
  • [–] 6 points 6 months ago

    Take a look at Fiio's wireless DACs. I use a BTR11 (costs like 25 EUR) and the quality is as good as I can reasonably expect at that price. Its output is a 3.5mm jack and it easily drives my 80-ohm Beyer.

  • source
  • parent
  • [–] 0 points 6 months ago (1 child)

    I wouldnt want any audio going over Bluetooth. The one I bought was 2.4GHz for the low latency so I can game using jt. There is a sound floor, but that can be minimized by broadcasting with volume as close to clipping as possible, without clipping of course. Its not audiophile grade, but it still sounds really good. I can't tell the difference in 95% of cases.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 3 points 6 months ago

    All that cracking pleather looks uncomfortable AF.

  • source
  • [–] 5 points 6 months ago (1 child)
  • [–] 2 points 6 months ago

    That looks Macgyvered as fuck, and i love it. I've done something similar before, but just temporarily and not attached to the headphones. I plugged my AKG K712 cans into my portable headphone amp, and that to a Bluetooth audio receiver. Then, had to have a power bank to run it all. It all fit into a Nintendo DS carrying case, but definitely not as convenient as having it attached to the cans.

  • source
  • [–] 2 points 6 months ago

    I find this quite interesting. Not dull. Harrumph!!

  • source
  • [–] 2 points 6 months ago

    My cat recently did something similar with a pair of mine...

  • source
  • [–] 1 point 6 months ago (1 child)

    The wireless transmitter I bought came with two receivers. I hot swap the receiver when it runs out of battery, and I have Velcro on the headset and each receiver so I just slap them on. Works great!

  • source
  • hideshow 1 child comment