123 is NTP, used for time synchronisation. Often a pool of servers is used.
post
No idea about the connections but did you just censor your local IP address??
Good opsec, really.
Edit: also I just realized this is the Privacy community lol
I was taught in my IT Sec classes to avoid sharing any unnecessary information. Information on private IPs can be used to better understand your network, allowing a threat actor to better navigate your network without needing to do ip scans (which are very obvious and should trigger even basic detection). While it is most likely pointless (since OP probably isnt at risk of targeted attacks), it is still good opsec.
since OP probably isnt at risk of targeted attacks
While right, what fun is it using enterprise grade hardware if you're not at least going to pretend to be serious with it 😁
allowing a threat actor to better navigate your network without needing to do ip scans (which are very obvious and should trigger even basic detection)
I mean, basically any device will send a DHCPDISCOVER broadcast on 255 when it connects, to see if there is a DHCP server on the network. Unless you’re running your entire network on pre-configured static addresses and have your router set up to intercept all broadcast messages (and treat the broadcasting device as hostile), any device plugging into the network would automatically broadcast a message anyways.
And honestly, if you’re being that paranoid about your network, you’d probably be better off just using port security and a MAC whitelist instead. It would save you a lot of time with manually configuring IP addresses. That way any threat actor would only be able to connect if they already knew a whitelisted MAC. And gentle device discovery can also be automated without obvious brute force “ping every IP in the subnet at the same time, and blatantly scan common ports on responding IPs” network scans. They’ll take longer, (and passive scans may miss some devices) but they wouldn’t trip the rudimentary “watch for any device firing ping requests out to every single IP” scan detection. Passive scans can be particularly difficult to detect.
The point of my comment wasn't that OP was in "real danger" if they showed local IPs, just that it doesn't hurt to censor them. Never give more information than necessary. I censor usernames and filepaths on any screenshots of the terminal, even though if an actor has the kind of access to utilize that information I am probably already fucked. I think it is good practice to always scrutinize the information you give out willingly.
Call it performative, but you don't know what subnet they're on 😝
How much metadata do you need until its PII? What subnets exist and which devices are potentially leverageable are valid points in a threat model.. maybe not entirely suited for everyone but I'm sure as hell my employer is unknowingly greatful for
Yep this is just NTP, nothing nefarious. If you have a "good" router that has an NTP server and can set the related DHCP option, try setting that. The servers it uses might be hardcoded, but I believe it will honor the DHCP lease.
Prusa recently partnered with an Israeli company called Fillament2 during the genocide so you already know what's up.
FUCK I need my own printer with blackjack and hookers
Now I want to usurp NTP server IP addresses on my local network to send my local printer back in the 70's. You should have accept B&W printing without those color cartridge, toaster !
all 53 comments