20
Serial over Ethernet with HA (piefed.zip)
submitted 1 month ago by to c/homeassistant@lemmy.world
8 comments fedilink hide all child comments
 

I just picked up a 4K commercial display to upgrade my TV for cheap. It has an RS232C port on the back for control, and Home Assistant has a native integration to control it via a local Linux tty. The hitch is that my Home Assistant server is located in a spot not near the television, and running physical serial line to it would be inconvenient. But, since I have a Raspberry Pi connected as the streaming media box, I should be able to plug a USB adapter into it and route the serial data over the network, right?

Is there a a good way to do this in HAOS?

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 1 point 1 month ago (2 children)

Thanks! I've got the TV end covered, the issue is at the HAOS end. The LG serial TV integration talks to a Linux device node (e.g. /dev/ttyUSB0), so the issue is stuffing the TCP stream back into a pty.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 9 points 1 month ago (1 child)

    That’s what they’re saying - you can use an ESP32 device as a serial proxy without having to do anything special. If you already have a device attached to it you could use the socket:/… syntax below.

    Per the integration documentation:

    Port

    The serial port the TV is connected to. This can be a local device path or a remote serial proxy URL. For example, /dev/ttyUSB0 (USB adapter), socket://192.168.1.100:2000(network proxy), or socket://esphome-device.local:6638 (ESPHome).

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •