23
Can mere dirt cause heatcreep? (discuss.tchncs.de)
submitted 9 months ago by to c/3dprinting@lemmy.world
9 comments fedilink hide all child comments
 

I'm trying to find the reason why my bigger printer suddenly decided to constantly create blockages as high as the PTFE tube in the cooling block (so a little bit above the heatbreak).

It's an older V6 head. The discolouring on the heating block comes from the single time the nozzle came lose and PETG was pressed through the threads upwards, that was a year ago though. I didn't change anything, from one day to another it just decided that (for both PLA and PETG) it'll now stop working properly.

Waiting on a stronger cooling fan (strongest Sunon I could find, the one with 9000rpm). Other than that I'm just confused why this suddenly happens.

Close-up of some dirty parts of a 3D printer's print head. There's the nozzle, the heating block (where the nozzle sits in, fitted with a heating element and a temperature sensor), the heatbreak (a thin metal tube connecting the heating block with a cooling block have a controllable melting point for the plastic) and the circular cooling block. The parts are rather dirty and discoloured.
you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 9 months ago

I had mysterious clogging in my e3d v6 I too thought it was heatcreep and to some extent it was heatcreep, but the real issue was that the extruder spring was putting on way too much pressure on the filament and made it into an oval shape which wouldn't go through.

  • permalink
  • fedilink
  • source
    •