No Masters, no Slaves - only Cable Select!
comments
Damn... 32 isn't that old, is it ?
It's not always what Gen are you, it's more like your knowledge and profession.
For those who know: remember to book your prostate exam
Saving Private Ryan, a gloves-off war movie about bringing this guy home on the last surviving kin rule. Had a lot of star actors in it.
Sounds like something a boomer would say.
I swear I saw this movie from the gif on TV once but I can't remember the name and only remember a small section of it
I'm gen z and even I know this is IDE
The cable with the twist is a floppy drive cable, not IDE.
That is an IDE cable, the standard for consumer-grade drives before SATA came along.
Sometimes you can find such cables with three connectors, one at one end, two at the other. And sometimes, a few wires are flipped over between those two connectors.
One IDE cable could host two harddisks, and most IDE harddisks had jumpers to set them to be drive 0 or 1. With a straight cable, you had to jumper them properly, with the partially twisted cable, you set both identical, I.e. you left them both as device 0.
So like... What does the jumper do?
Same.

Should also see the IDE slave/master jumper on the drive itself.
There's no way I could remember a model number or brand. I worked Geek Squad back then and replaced probably thousands of laptop hard drives. Number one point of failure
What laptops do you remember with a 2.5" IDE ssd? Microdrive hard drives were more popular in laptops than their CF counterparts just because SSDs were so slow and low capacity. SSDs didn't take off until right before NVME era.
Disk on modules existed, but those were for industrial PCs and nothing a normal person would ever actually use.
I think the technical name for that connector is "nostalgia".
Laptops for a while had these on the 2.5 inchers, and then I remember a very small window of time having IDE 2.5 inch ssds, but it was a very narrow window
My god I've never felt so old until this post
Was going to post this exact gif
Im old enough to know how to do that too. My comment was clearly ment to be humorous.
It was one of those I feel old moments nothing moee

IDE Cable. The end with two of these plugs goes to the drive, the end with one plug goes to the mobo. If it's a two-plug cable, it don't matter.
Get an IDE to SATA adapter or IDE to USB adapter to connect this drive.
Kids these days, they don't even know how to change the ribbon in a typewriter.
What, so you're telling me that's "silly" because it's no longer relevant? Well, about that...
An 80 wire one, too, so it probably supports some manner of "Ultra" ATA. 66 or maybe even upwards of 100 MB/sec!
I still remember the "master" and "slave" settings on HDD's.
The "master" drive is the primary device, and the "slave" is the secondary. The configuration was set via jumpers on the hard drive or by using a "cable select" cable.
Having two HDD's installed in my PC felt like a achievement at the time.
WD Drive Plus, portable HDD. Model no.: WDBZC0040BBK-WEWM. This does have 256-bit encryption, but I also never set up any password or anything as I mentioned earlier. It was exfat when I bought it and changed it to ext4 so I could use it on my Arch computer. Haven't had any issues til about a little less than a week ago now. I also always make sure nothing is moving or making sounds, etc. before I unplug and move things. No visible exterior damage, and nothing tinking around internally.