You might need other drivers in the boot image, like chipset or controller.
comments
I was able to track down what I believe are the correct storage controller drivers from the mobo manufacturer and install those during the recovery process, but no change.
The only other thing I can think of is to dig out an old >1Tb sata drive and try recovering to that.
And yes, lesson learned for next time about making and testing the recovery drive ahead of time. I mistakenly put my trust in MS that recovering from a full system image using their own utility would be a dead simple process...
Mobo, storage controller driver. Maybe others.
The is used to boot needs appropriate drivers. It’s why most backup software suggests making a boot usb before you need it.
Thanks, would that driver come from the mobo manufacturer or the drive manufacturer?
I read some references to people using an Intel storage driver, but this is an AMD system if that makes a difference.
You need the storage driver.
...I guess Konsole (from KDE) does have settings for adding sounds.
So I believe it was the Defender full scan crawling the Google Drives mapped drive letter and accessing every file it found causing every file to be downloaded and cached. So I'm rerunning the scan with all my cloud drive agents disabled.
Nah it depends on the region I guess. I'm a few years under that and I worked with IDE cables many times as a kid
Yes, there is definitely the "cable select" method with pin 28. Maybe instead of cutting it, they swapped it with a GND pin or something?
This functionality was implemented with a single cable select wire which is connected or open. I don't see how a twist would work electrically.
You can twist the IDE cable to switch the M/S configuration, too. It is not limited to the Shugart bus. But I have to admit it was more common there.
Not intentionally or that I'm aware of!
Downloading. I'll have to check my Drive settings, and I guess look in my drive to see if there's any suspicious new files in there, as I didn't think I even had that much in it.
The other way around - it says 75GB download. The point stands, though.
googleapis usually google drive sync.
https://www.npmjs.com/package/@googleapis/drive
So you were uploading files to google drive.
Many IDE cables used to come with 2-4+ daisy chained connectors allowing you to plug in multiple drives into a single cable on a single IDE bus.
This meant that you had to ensure any downstream HDDs would be configured as slaves to show up properly to the system.
You could either do this manually by setting the jumper to slave (usually just removing it) or setting the jumper to cable select which would automatically configure master slave drives for you.
Example for a Seagate drive:

In your case, you could either use the master select or cable select and it wouldn't matter since you only have one drive.
Today I ordered some chicken nuggets from mcdonalds and asked for hot mustard sauce. the kid at register had no clue what that was and gave me some sort of chipotle sauce. we are, indeed, getting old.
Incorrect.
Time for a colon cancer screening.
Good god, please tell me this is a troll post.
Yep.
Basically dead.
I remember paying 80 bucks to go from 4 to 6mb of ram. windows 3.1 load time so much better
IDE was a step up from SCSI bs