[–] 9 points 5 months ago

This is probably the coolest innovation I have seen in the past few years from the open source community. That is so awesome!

This guy is extremely smart and dedicated. It is crazy that he has been able to do it all single handedly as a hobby in only a few years!

  • source
  • [–] 1 point 6 months ago

    Ok, I've done experiment myself; it was a dumb idea. Sure I can see the bass beat on smarthone hall sensor as sharp periodic spikes... from few cm away of the coil.

    Thing is, any measurable signal outside of coupled system is essentially power loss, which industrial made speakers are, obviously, optimized against. The field loops back into the magnetic drive through the shortest achievable path. Then, it's not your typical radiative EM system, it's low frequency near field transmission - field drops exponentially as you move away from the coil.

    Most probably, you'd need to measure long periodic signal, do lots of oversampling, etc. to gen anything. Or build a high fidelity resonator to steal the field from the speaker - essentially, same thing, except the resonator will probably start singing, too.

    So I'd give up on magnetic approach; why go for counteroptimized signal when you have optimized acoustic field? Just analyze it - look for sustained harmonic vibrations, fat envelopes so different from human voice barking and foorsteps; EDM are full of those nice sounds.

  • source
  • parent
  • context
  • [–] [S] 2 points 6 months ago

    The "theoretically eternal" is because it does not use any batteries or wearable parts, and currents are low. The components might fail eventually, but others said their circuits have been working for 15+ years.

  • source
  • parent
  • context
  • [–] 3 points 6 months ago* (1 child)

    If you just want the count and not the strength or waveform, I wonder if the magnetic field from the voice coil of the speaker would be strong enough to trigger a reed switch at that distance. A common reed switch has a top switching speed between 100Hz to 500Hz, which is within the 20Hz to 250Hz of human hearing bass.

  • source
  • [–] 2 points 6 months ago (2 children)

    Could be doable with just a hall sensor chip, you have one in your phone, just check it out quickly. Large coil will probably catch slow vibrations too. Also try just filtering audio signal, like get only sustained bass sound, footsteps and voice have short lived low frequency components compared to most music except for percussion I suppose.

  • source
  • [–] 5 points 6 months ago (2 children)

    I mean it's cool, but "theoretically eternal" is a tad optimistic. I have a refrigerator that had several very similar capacitors to the two I'm seeing here. One of these capacitors had swollen beyond recognition and disabled it after a mere 5 years.

  • source
  • [–] 5 points 6 months ago

    hell yeah, I've made a whole useless product like that! In lab, we had OLED display powered by NFC too, and touchscreen e-ink tetris device, and spot welder lol. Nobody believed me it's possible, even engineers who worked with me, might be I was the first one to come up with this hack.

  • source
  • [–] 2 points 7 months ago* (last edited 7 months ago)

    Single sided PCB assemly, Single sided LCD controller with many, many vias, single sided PCB layout screenshot, all with vias. Single sided ≠ single layer which I think is where the confusion was coming in for me.

    But you are right, looks like I have a lot more to learn. I have only ever made a 1 layer of copper PWM speed controller because I guess I am not good enough to make 1 layer PCBs. Almost every design I have ever worked on would be physically impossible to use a 1 layer PCB simply due to the IC package pinouts literally not allowing it. They get around the via problem in your picture quite cleverly by using a dozen jumper wires as via+2nd copper layer. Plus there are no non-discrete ICs which helps a lot.

    I would love to know the supplier that Philips uses here, none of my suppliers were willing to do such hand-wiring-intensive work for anything less than a fortune.

    But I admit, you have proven me wrong in that was quite the exaggeration to say that "literally every part of electronics design" requires multi layer PCBs. Though I never meant to imply that people weren't engineers doing this. I was specifically addressing the response to OP because it was about SMD using a single sided board for SMD components and OP specifically talked about a replacement for sending boards to China or common PCB houses., but I reacted in way way too broad of statements which was wrong.

    There are thousands of write wound boards, hand wired boards, or projects like this guy which are very well done and well engineered projects. Wire-wound PCBs were the first GPS modules also, and they were 10x the engineers I could ever hope to be.

  • source
  • parent
  • context
  • view more: ‹ prev next ›