[–] [S] 1 point 4 months ago

Ok, thanks everyone! I cleaned up my mess and got it working again, but couldn't get it onSPD mode to jailbreak it. Does anyone know another test point where I can try it?

  • source
  • [–] 3 points 5 months ago* (1 child)

    I can highly recommend surgical scalpels to work on PCBs. It also sounds like the shorting of the two pads only has to happen once to flash the firmware, so maybe you could use one of those cheap needle probes to temporarily get contact with the via under the ripped off pad.

  • source
  • parent
  • context
  • [–] 4 points 5 months ago (1 child)

    Given how your first mod went, I'm going to suggest you use something decidedly less aggressive than a dremel. Leave the power tools on the bench for this one. A simple hobby knife or sanding stick will get you there just fine.

  • source
  • parent
  • context
  • [–] 3 points 5 months ago

    There are also non-open-hardware solutions available, which reach even bigger sizes at 33 Hz and 3 bit per pixel, for instance from Dasung.

    I have the "DASUNG Paperlike Color (Revolutionary)", and I use it for coding. I works really well for that purpose, but I would not recommend it for anything else. That's because it really only has 3 bits per pixel, meaning you get exactly 8 colours: black, white, red, green, blue, cyan, magenta and yellow. No shades of grey or anything, just those 8 colours in full saturation. For text (with disabled anti-aliasing - it makes the text fuzzy, but it is not needed, the resolution is great) that's fine, for anything else not so much. Also, the contrast of the colour display isn't too great. It either needs sunlight, its built-in front-light, or a desk lamp. It is also worth noting, that (at least the colour) Dasung screen does not have any display modes at higher bit-depth.

    I also have a Boox Mira (non-Pro), which (I think) has 15 Hz, but unlike the Dasung, it also a "presentation mode" with more bits per pixel (I don't know how many, I think it has 12) but much lower refresh rate (feels like 5 Hz). That mode is good for anything that doesn't move, like reading papers or non-animated webpages.

    I am using the Dasung for work, and the Boox for spare time stuff. Typing works better on the Dasung screen, because of its higher refresh rate. Reading works better on the Boox, because of its higher bit-depth.

    If I wouldn't already have the Boox Mira, I think I would buy the Modos screen for basically the same use-case. I am actually considering getting the Modos devkit, and modding my laptop with it, but will probably not do that because I barely use my laptop nowadays and can always just connect the Boox display via HDMI.

  • source
  • [–] 1 point 5 months ago

    I would, but at this price I can buy two color boox devices, and I'm eyeing one for a couple of years now. Hope this gets traction, but I'm not this first adopter-pilled.

  • source
  • [–] 6 points 5 months ago* (last edited 5 months ago)

    Einks usually degrade at fast refresh rates (or too many or too few reflashes), but that might be just the cheap ones (otherwise this product wouldn't last more than a few years, which hopefully ofc isn't the case).

    But the "brightness" limitation of colour einks still bothers me a lot, the contrast on/of white backgrounds is just too good on monochrome versions (eg for books I don't want colour einks), and it's not just something I would only notice in direct comparison, it's a constant feature/luxury.

  • source
  • [–] 7 points 5 months ago

    God damn. Kinda makes me rethink the color android ereader I'd been thinking about getting in hopes something like this comes along...

    I read lots of webcomics and a higher refresh rate would be hugely helpful when I'm reading webtoons (though I much prefer old school indie webcomics)

  • source
  • view more: ‹ prev next ›