Hello everyone.

I'm getting a hard time with Qualcomm Atheros AR8151 onboard LAN with Debian. It usually drops to 100Mb/s and freezes the network altogether

Settings for enp1s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 0 Transceiver: internal MDI-X: Unknown Supports Wake-on: pg Wake-on: d Current message level: 0x0000003f (63) drv probe link timer ifdown ifup Link detected: yes [ 3.004591] atl1c 0000:01:00.0 enp1s0: renamed from eth0

[ 37.754972] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> [ 45.071291] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> [ 45.799689] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>

any tips of what can be done around here? I'm using kernel 6.12.111+deb13-amd64

Hello everyone. I'm getting a hard time with Qualcomm Atheros AR8151 onboard LAN with Debian. It usually drops to 100Mb/s and freezes the network altogether

Settings for enp1s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 0 Transceiver: internal MDI-X: Unknown Supports Wake-on: pg Wake-on: d Current message level: 0x0000003f (63) drv probe link timer ifdown ifup Link detected: yes [ 3.004591] atl1c 0000:01:00.0 enp1s0: renamed from eth0 [ 37.754972] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> [ 45.071291] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> [ 45.799689] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex> any tips of what can be done around here? I'm using kernel 6.12.111+deb13-amd64

I have setup my arr stack with qbittorrent using i2p. unfortunately, it never get to download anything. The i2p part seem to be working, but torrents never get downloaded. As a total noob on it, any advices on how to setup it correctly?

This questions goes to the immich-wise people around here.

I have just some pics from my wife's google phoots that I want to import on our immich account. What's the best way to bring it with the correct metadata? Just save locally onthe desktop than import into immich?

another doubt is how adequately import old scanned photos on immich. I have scanne some thru an self-loader scanner. they are somewhat bent, in the wrong direction and need cropping and other minor adjusts. Would be better to make this on the desktop with some tool and than import to immich OR import everything in the way they are and then edit them inside immich?

I have a lineageOS with microG phone with a unusal problem. I haven't seen it, at least. I tried to install my old banking app again from Aurora, in the hope it could work again (it used to, but stop a few months ago after an update). Well,, Aurora downloaded the app, but its stuck on the install part, with the "circulating round thinghy" on it. I tried to kill aurora, reboot the phone, nothing. If I open aurora and go to this app, it keeps on the "installing" status. The funny thing is that I can install or remove other apps just fine, even thru aurora. Any Ideas?

I saw a big bunch of posts around here discussing the use of VPNs or i2p to torrent. As I seldom download something, I wasn't too much worried about using my IP. Now I'm using an arr stack and that kicked me in the way to protect my connection a little better. So, what are you all using nowadays for your torrenting?

I have a family immich instance self-hosted. All pics from my kids devices are auto-uploaded on our instance. This is nice, but also updates a lot of photos and videos of they kidding and joking, ando lot of repeated stuff. Immich only allows that I exclude my own stuff, and it’s really boring have to login with each account to exclude my kids stuff. Is there anyway that I can manage and exclude photos and videos of other users?

I got and old kindle 8th gen (SY69JL) for free, 'cause it couldn't connect with any wireless network. I tried to do the bridge for popcorn hack as seen here (https://kindlemodding.org/jailbreaking/Legacy/Popcorn/KT3.html). Stupid as I'm, I used the 60w solder and I thing I ripped one of the pads. The damn thing doesn't turn up (not even the led) or shows at lsusb. Is this now just an e-waste? It gets a little warm when puggled on the usb.

Hello mates, Does anyone have any tips to share in improving subliminal subtitle search and download? I have trouble in finding pt-BR subtitlesd with it, and, at the moment, I can't run a bazzarr server where my jellyfin is stored.

Hello everyone. Need some opinions here. Does it worth all the trouble to make things like jellyfin and immich run with HTTPS for services that are only accesible in the LAN? I ask it 'cause, as far as I know, there is no way to put a valid certificate like let's encrypt for a service that is not accessible from the net and I don't plan to buy a certificate for myself. But I have some trouble with the rest of my family having issue with their browsers complaining about the lack of https every time a browser is updated. So, what would be the best solution?

Is there anyway to make readsb or other part of an ads-b stack to send notifications when it detects a plane on the range?

Hello everyone! Is there any alternative to android auto for a degoogled phone running microG? I mean, one that can connect on " android auto ready” devices.