[–] [S] 4 points 7 months ago (1 child)

Oh shit. That's the one. It shows up as $979 for me, with delivery in April. The video mentioned an optional dust collector, but I didn't see that anywhere.

At that price point I'm gonna YOLO into it.

I gotta figure out normal things I'd want to use it for. I don't have a lot of need for metal stuff.

  • source
  • parent
  • context
  • [–] [S] 3 points 7 months ago (1 child)

    Lol it wasn't a jab at you, but a statement on how the precise measurements of drill pieces for the CNC machine sounds like gobblygook to someone who hasn't entered that world, whereas your analogy makes it seem more accessible.

  • source
  • parent
  • context
  • [–] [S] 5 points 7 months ago (3 children)

    Yeah the cost benefit analysis on a $1,000 CNC machine is pretty easy to see. My 3DP setup was less than that, and even if you take out all of the pews, I've probably broken even already on other stuff that I've printed that I would've otherwise bought on Amazon.

    My guess is that a $2,000 desktop mill is what it would take for people here to start playing around with it. The Carvera one I looked at fits the bill for desktop, fully enclosed, clean, easy to use, but it's sitting around $5,000. I think you'd have to have some need or interest beyond pews to buy something like that, or enough hate of Rare Greed or love of the 2A to go all in just for that.

    If I had a CNC mill, was a bit of an artist, and had enough design skills, I'd dissect every Gucci AR, figure out why their machining justifies such a high price point, and throw all of those features together. Then I'd release the file as "the $1,000 lower receiver" on the index, so that everyone could feel like they'd broken even on their first project.

  • source
  • parent
  • context
  •  

    I'm a hobbyist with a half dozen or so builds and dozens of accessories under my belt. All of which I've been able to do thanks to the giants in this community who share their files and make this all so easy.

    My question is twofold, and is born out of ignorance of the requirements of machined metal parts, as well as the capabilities of CNC machines.

    If you had a simple desktop CNC machine, like a Carvera or whatever would be the Ender3 equivalent, how much of an AR15 build, for example, could you go? I remember seeing some chatter about people subtracting lower receivers using machines like this, but could you go farther and make a BCG, a barrel, a buffer tube, or any of the components of the FCG?

    What about for builds like a Mac 11? It seems like the parts kits sellers are machining those themselves.

    And for a glock, it seems like the rails you could make very quickly, but could you make a barrel or a slide?

    Lastly, aside from the mechanical capabilities of the machine, theres the question of access for people like me who currently have no confidence in designing files safe for use. I haven't seen any CNC ready files in my browsing on the Index, which I take is due to the rarity of CNC machines amongst the community. Would it be safe to assume that once word gets out in the community that there's a sub $1,000 CNC machine that lets you go farther on your builds than just a 3DP, that we'd see a proliferation of CNC ready files?