127
Sunshine game streaming tool adds Vulkan encoding plus XDG, Pipewire, and KWin direct screencast capture (www.gamingonlinux.com)
submitted 5 months ago by to c/pcgaming@lemmy.ca
26 comments fedilink hide all child comments

all 26 comments

sorted by: hot top controversial new old
[–] 26 points 5 months ago

This software was a total game changer for me I can play on any screen in my house and the lag is very minimal sometimes I forget its actually streaming.

  • permalink
  • fedilink
  • source
    •
    [–] 12 points 5 months ago (16 children)

    Can I ask for those of you who have been using Sunshine (and specifically Moonlight) without issue - is there some part of your setup that you upgraded or had to troubleshoot specifically to get it to work well?

    I have tried it on 802.11ax and with my Steam Deck, same household & router & network, and playing anything that requires a modicum of reaction timing was frustrating and inconsistent. I mean, 10ms or so of lag is playable, and 20ms could be in a pinch, but I was feeling rubberbanding into 50+, lag spikes, etc.

  • permalink
  • fedilink
  • source
  • hideshow 16 child comments
    •
  • [–] 9 points 5 months ago (4 children)

    I've been using Sunshine/Moonlight for a couple of years now. Over wifi to my client device (NVIDIA Shield) it worked ok but would have a 0.5-1.0 second lag spike every few minutes. I tried all kinds of suggestions I could find but nothing properly fixed the issue. Besides that though the latency was fine enough.

    Switching to ethernet resolved all issues and further improved the latency and it's been perfect streaming at 4K 60Hz. I've only ever done local streaming though.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 5 points 5 months ago (3 children)

    Thank you. Seeing a theme here with ethernet. I do wish there was a reliable wifi solution, but I guess that's more than technology can deliver right now.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 3 points 5 months ago* (1 child)

    If ethernet to your main router isn’t doable, your workaround is to have a dedicated router connected to you PC’s ethernet port and broadcasting its own WiFi just for streaming.

    My partner and I use this setup with pocket-sized travel routers for LAN parties so that we can use our Steam Decks and SFF PCs instead of moving a whole keyboard/mouse/monitor setup and requiring a desk.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 7 points 5 months ago

    Ethernet is the way to go. At least try it if you can to see if that improves things or if it's another component of your network.

    Mine is 1ms at all times, it's such an amazing app. My network is also very much not typical, but Ethernet should help a ton for you.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 6 points 5 months ago (2 children)

    My solution: I have a second, older (wifi 5 tho) router in access point mode plugged into my computer’s Ethernet port, and when my pc is on it forwards internet from its wifi connection to it. When I’m streaming to a device, it is the only device connected to that network. That also lets my computer have a wired connection to the router.

    Additionally, I analyzed the network utilization near me to find which WiFi channels had the least congestion. Tbh tho, as long as the channel is different from your main router, you’d probably be fine.

    I originally set it up for streaming wireless pcvr to my Quest 2, but I’ve found it works perfectly with Sunshine + Moonlight.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 5 months ago (1 child)

    Thank you, that's a novel idea. Have you noticed any spikes, lag, or it's just rock solid?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 2 points 5 months ago

    On modern devices (pretty much anything that supports 5Ghz) it feels rock solid to me. I can forget I’m streaming. Even my old laptop from like 2013 gave me really good results. In my case I usually stream to something in the same room as that router, so ymmv.

    I’ve tried the moonlight homebrew on my “New 3DS” though, which only has 2.4Ghz WiFi, and had less success, even with the ridiculously low resolution. I usually can play for a minute or two, but as soon as there’s one lag spike it’s like it can’t catch back up. I need to try it again though, a recent update may have helped, I just didn’t test it thoroughly. But that’s, like, pretty niche haha!

  • permalink
  • fedilink
  • source
  • parent
  • [–] 5 points 5 months ago

    For me, it took a lot of troubleshooting to get it working reliably. But one key step was having the host with a wired connection, better still, the clients, too. But at least the host. Even with a fast, well covered WiFi network, it was too unpredictable to use regularly. And don’t even get me started on macs, using a specific WiFi channel to broadcast handoff, relentlessly…

  • permalink
  • fedilink
  • source
  • parent
  • [–] 4 points 5 months ago (2 children)

    I have yet to make it work well enough over wifi. I am planning on running cat6 down to my tv

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 3 points 5 months ago (1 child)

    cat6 is overkill for 4K streaming, but it's future proof. I went for cat5e since it was half the cost at the time and most of my equipment is gigabit anyway.

    Will I regret "only" having 2.5gbps cables instead of 10gbps? idk. Seems unlikely.

    But, regardless, yes. Wired is so much better.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 3 points 5 months ago

    Everything on gigabit ethernet and everything is perfect. Wireless clients are ok but the occasional stutter. I wouldn't even try the host being wireless. It's more reliable that steam for me.

    I only do 1080p60 streams because I'm playing on a TV if I'm not at my computer.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 2 points 5 months ago

    I tweak the streaming quality settings to sacrifice quality until I’m happy with the lag. I find that the default settings err heavily on the side of quality.

    For example, moonlight typically defaults to 20mbps for 1080p@60. I wouldn’t put that higher than 10mbps, and it’s acceptable as low as 5mbps albeit with significant artifacts.

  • permalink
  • fedilink
  • source
  • parent
    • [–] 5 points 5 months ago (3 children)

    Does it pass mic input yet?

  • permalink
  • fedilink
  • source
  • hideshow 3 child comments
    •
  • [–] 2 points 5 months ago (2 children)

    No

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
    • [–] 3 points 5 months ago

    I love it, works really well.

  • permalink
  • fedilink
  • source
    •
    [–] 1 point 5 months ago (2 children)

    I had my SD on Ethernet and my PC on Ethernet and its still completely unplayable on even slow games like rimworld or cities skyline 2.

    The bitrate gets destroyed everytime you rotate the camera. The input lag I can get used to but the quality is so bad its like using fsr1 on performance mode.

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
    • 1 comment in c/pcgaming@lemmy.ca view that post
    [–] 0 points 5 months ago

    Is anyone able to explain kwin direct screen cast capture to me? Does this mean I won't need a dummy plug anymore?

  • permalink
  • fedilink
  • source
    •
    1 comment in c/gaming@lemmy.zip view that post
    [–] 1 point 5 months ago

    I wonder how much of Valve's downstream fork they can adopt, or if it's worth it and they are willing and able.

  • permalink
  • fedilink
  • source
    •