I've only used plastic so far. A friend was moving and she gave me her wooden cutting board. I cut something with it, and some grease got on the cutting board. Now I can't remove the yellow spot no matter what I do. What can I do to clean it?

all 42 comments

sorted by: hot top controversial new old
[–] 18 points 10 months ago (1 child)

Add more grease so the whole board is the same color

  • source
  • hideshow 1 child comment
  • [–] 34 points 10 months ago* (last edited 10 months ago) (9 children)

    I'm guessing it wasn't (well) oiled. Oiled boards are fairly easy to clean and nothing will soak into them as long as they're cleaned after using.

    Might come off with scraping and oiling, so treat the board again. Otherwise the spot is not going to be harmful in any way and cutting boards get marked over time in any case.

  • source
  • hideshow 9 child comments
  • [–] 6 points 10 months ago* (7 children)

    Maybe fighting fire with fire and setting the whole board with olive oil now would help at least hide the spot. Beyond that, only time and use helps in my experience.

  • source
  • parent
  • hideshow 7 child comments
  • [–] 30 points 10 months ago (6 children)

    Olive oil can go rancid and add off flavor to food. Use mineral oil instead. Some people also go with distilled coconut oil, but I still think mineral oil is the best choice.

  • source
  • parent
  • hideshow 6 child comments
  • [–] 4 points 10 months ago (5 children)

    Ack! No petroleum products on my cutting boards! I've used walnut oil for years, as I was told it's the only food grade oil that dries, and doesn't go rancid. I have a lot of cutting boards, wooden utensils, bowls, a few "plates" or "plowls". And I live in a dry climate, so they get oiled up about once a year. I just did the bowls, and wow do they look great!

  • source
  • parent
  • hideshow 5 child comments
  • [–] 15 points 10 months ago (4 children)

    Not an expert here, but food-grade mineral oil is safe for cutting surfaces from every source I've read. It's even commonly used as a laxative.

    Meanwhile, from what I gather, walnut oil has a comparatively long shelf life, but it does eventually go rancid, leaving an off smell. But it may be that yearly oiling makes that a relatively moot point, with the new covering the old.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 3 points 10 months ago (3 children)

    Mineral oil is definitely safe, just try not to inhale misted particles in large amounts regularly. Pouring some on your cutting board and rubbing it in should be totally safe.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 1 point 10 months ago (2 children)

    Huh. So in what context would there be misted mineral oil in the air? Like in a factory or workshop..?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 9 points 10 months ago

    Lots of great comments here but one more awesome thing about wooden cutting boards - you can always sand off a very fine layer to expose new wood if the surface gets too gnarly. Then oil it and use it like usual again.

  • source
  • [–] 7 points 10 months ago

    Turn it over 

  • source
  • [–] 6 points 10 months ago

    Sprinkle with salt, cut a lemon in half, and scour the board. Leave for a few hours, rinse and wash with dish soap.
    Repeat as necessary, and every few weeks.

  • source
  • [–] 8 points 10 months ago (15 children)

    get you some mineral oil and beeswax. 2/1 ratio. heat them in a saucepan on low heat until combined. pour the mixture into a shallow vessel - empty tuna cans work great. allow the mixture to solidify. use a dry clean cloth to apply the paste to cutting board. let it sit for an hour and then wipe off the excess.

    repeat once a month-ish or when the wood starts to lighten.

  • source
  • hideshow 15 child comments
  • [–] 8 points 10 months ago (11 children)

    How to get mineral oil and beeswax out of a saucepan

  • source
  • parent
  • hideshow 11 child comments
  • [–] -2 points 10 months ago (9 children)

    lol, good luck. also please no petroleum products on wooden kitchenware. smh

  • source
  • parent
  • hideshow 9 child comments
  • [–] 17 points 10 months ago (6 children)

    There is literal food grade mineral oil for this exact purpose along with lubricating food making equipment. It's basically completely inert and is sometimes even used as a food ingredient. You can straight up drink a jug of the stuff with no health repercussions other than the violent greasy shits you would get from drinking any oil. Just because it's a petroleum product doesn't automatically mean its bad for you.

  • source
  • parent
  • hideshow 6 child comments
  • [–] -1 points 10 months ago (3 children)

    Can you cite any research, not sponsored by the petroleum industry, that relates to this opinion? Walnut oil is a food product, is made from walnuts, doesn't go rancid, and works quite well for maintenance of cutting boards and other wooden kitchen ware.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 3 points 10 months ago (2 children)

    walnut oil is lovely. it doesn’t penetrate the wood as deeply as the mineral oil + beeswax tho.

  • source
  • parent
  • hideshow 2 child comments
  • [–] -2 points 10 months ago (1 child)

    Have you any actual data, you know, like a study of depth of penetration of your petroleum based product compared with other wood finishes?

  • source
  • parent
  • hideshow 1 child comment
  • [–] 3 points 10 months ago

    i witnessed its effects on the woods that i’ve applied it to. i’m a woodworker, not a scientist or academic paper reader/writer.

    i’m not sure why it’s now MY petroleum product tho, that’s a weird and aggressive way to ask your (i think rhetorical) question.

    doing in fact, when it comes down to it MY preferred finish is actually shellac, but it doesn’t perform well in kitchen applications.

  • source
  • parent
  • [–] 2 points 10 months ago (2 children)

    You can also get pre-mixed stuff if all that is a hassle.

    I got a wooden cutting board and a tube each of oil and some stuff that seals it, those have lasted for 8 years now maybe.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 10 months ago

    I would just keep it as is. But yeah, sounds like your board wasn't oiled properly. Rub some mineral oil into it and leave to dry.

  • source
  • [–] 1 point 10 months ago
    [+] -13 points 10 months ago (8 children)
  • [–] 5 points 10 months ago (7 children)

    Plastic harbors bacteria. Every cut makes a tiny groove for the wee folks to inhabit. These folks started researching wood v. plastic back in the 90s: https://cms.johnboos.com/assets/wood-vs-plastic-cutting-boards.pdf

  • source
  • parent
  • hideshow 7 child comments
  • [+] -10 points 10 months ago (5 children)
  • [–] 7 points 10 months ago (4 children)

    Dishwashers aren’t some magical tool. They just wash so you don’t have to.

    Well, that and… I put wood boards through the dishwasher all the time. Not end grain blocks, but regular low profile boards.

  • source
  • parent
  • hideshow 4 child comments
  • [+] 0 points 10 months ago (3 children)
  • [–] 2 points 10 months ago (2 children)

    I tossed mine and got a new one.

    Plastic needs to be bleached for 30 minutes to remove contamination. A dishwasher won’t be enough.

  • source
  • parent
  • hideshow 2 child comments