I am imaging this drive just in case it dies (from a 2000 gateway laptop I'm setting up for old games). it's a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn't think I'd need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

SOLVED: FOR future humans: the issue was some of the usb ports on this desktop are not working. I believe the psu is failing. Drive imaged fine once I tried other ports!!

all 19 comments

sorted by: hot top controversial new old
[–] 7 points 1 year ago (2 children)

Are either of the USB->IDE adapters ones with a second USB plug for more power? A long time ago I had issues using an adapter that didn't have a second plug as it wasn't supplying enough power to properly spin up the drive.

  • source
  • hideshow 2 child comments
  • [–] [S] 2 points 1 year ago* (1 child)

    so the first adapter was a little smaller and had extra power for 3.5" drives but not 2.5". It still spun up fine though.

    The next one I got is bigger, and has it's own little power supply for 2.5" drives as well as an extension for the molex on a 3.5" drive.

    this is the one i use now: https://www.newegg.com/jansicotek-e02-usb-to-ide-sata/p/35G-00MX-00001?Item=9SIAD8FK4X1895

    It still spins up the same. I'm not sure if it's just a linux issue but I find it weird since I've never had a peripheral that linux didn't at least acknowledge was there. I don't have a windows pc to really test it on either.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 4 points 1 year ago (12 children)

    Based on this single 2.5” drives don’t use a jumper.

  • source
  • hideshow 12 child comments
  • [–] [S] 1 point 1 year ago (11 children)

    Oo yep that makes sense then.

    Darn. I really hoped this would work. Im not sure how else to backup this drive, I mainly want to do that to keep the drivers intact

  • source
  • parent
  • hideshow 11 child comments
  • [–] 3 points 1 year ago (10 children)

    Maybe try and boot something like clonezilla to the laptop you took it from instead of messing with shoddy adapters?

  • source
  • parent
  • hideshow 10 child comments
  • [–] [S] 2 points 1 year ago (9 children)

    How would I clone it on the laptop

  • source
  • parent
  • hideshow 9 child comments
  • [–] 3 points 1 year ago (8 children)

    Plug the destination drive into the new USB adapter you got?

  • source
  • parent
  • hideshow 8 child comments
  • [–] [S] 1 point 1 year ago (7 children)

    The laptop is too old to read a usb device like that without drivers

  • source
  • parent
  • hideshow 7 child comments
  • [–] 1 point 1 year ago (3 children)

    OK something that old surely has a serial port on it? If so, look in to "sneakernet" (it's a technique, not a product) to connect to another computer. I've even done networking over a serial port with linux, but there also used to be software just for copying files. That wouldn't give you a drive image but it would at least back up the software.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 3 points 1 year ago (2 children)

    That hard drive is probably multiple gigabytes, it would take days to weeks to transfer that over a serial port. If the computer has a PC card slot, I would look for an ethernet adapter that would work with it.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 1 year ago (1 child)

    Heh I managed to jump directly from best-case to worst-case, but hey, that still leaves everything in between as options. :-)

    Yeah, speed is everything and there are pcmcia ethernet cards for $10 or less on ebay if OP has that option.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 3 points 1 year ago

    I've also got a couple of older drives that my IDE to USB adapter refuses to work with. I never found a solution, but the drives work fine in a PC that has a real IDE interface.

  • source
  • [–] 2 points 1 year ago (1 child)

    Absolutely tangential but,

    I first read this thread title as "Imagine having an IDE drive" and I couldn't stop thinking of some instance admin somewhere doing Mad Retro Science raising a lemmy instance on the power of i386 Void Linux and the spite of a pregraduate having to deal with a molex connector.

  • source
  • hideshow 1 child comment