I am imaging this drive just in case it dies (from a 2000 gateway laptop I'm setting up for old games). it's a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn't think I'd need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

SOLVED: FOR future humans: the issue was some of the usb ports on this desktop are not working. I believe the psu is failing. Drive imaged fine once I tried other ports!!

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 1 year ago (10 children)

Maybe try and boot something like clonezilla to the laptop you took it from instead of messing with shoddy adapters?

  • source
  • parent
  • hideshow 10 child comments
  • [–] [S] 2 points 1 year ago (9 children)

    How would I clone it on the laptop

  • source
  • parent
  • hideshow 9 child comments
  • [–] 3 points 1 year ago (8 children)

    Plug the destination drive into the new USB adapter you got?

  • source
  • parent
  • hideshow 8 child comments
  • [–] [S] 1 point 1 year ago (7 children)

    The laptop is too old to read a usb device like that without drivers

  • source
  • parent
  • hideshow 7 child comments
  • [–] 1 point 1 year ago (3 children)

    OK something that old surely has a serial port on it? If so, look in to "sneakernet" (it's a technique, not a product) to connect to another computer. I've even done networking over a serial port with linux, but there also used to be software just for copying files. That wouldn't give you a drive image but it would at least back up the software.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 3 points 1 year ago (2 children)

    That hard drive is probably multiple gigabytes, it would take days to weeks to transfer that over a serial port. If the computer has a PC card slot, I would look for an ethernet adapter that would work with it.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 1 year ago (1 child)

    Heh I managed to jump directly from best-case to worst-case, but hey, that still leaves everything in between as options. :-)

    Yeah, speed is everything and there are pcmcia ethernet cards for $10 or less on ebay if OP has that option.

  • source
  • parent
  • hideshow 1 child comment