I'll believe it when I see it with my own eyes.
post
The antimatter trap has a allu foil hat.
I love shit like that.
We have this incredibly expensive machine that was made by incredible engineers and scientists who spent an ungodly amount of hours on it. And their solution to some kind of problem with the machine, was to wrap a part in kitchengrade alu-foil, probably from the employee kitchen.
Aluminum foil is very common in physics labs. And a main use for it is "baking"! To get ultra high vacuum (UHV)* you generally need to "bake out" your chamber while you pump down. Foil is used same as with baking food
keep the heat in and evenly distributed on the chamber.
Sadly, it's usually not food grade aluminum foil, as that can contain oils, and oils and vacuum are generally a big no-no.
*Just how good is UHV? Roughly: I live in San Francisco, which is ~7 miles by ~7 miles (~11km). Imagine you raise that by another 7 miles to make a cube. Now, evacuate every last molecule of gas out of it. Now take a family sedan's trunk, fill it with 1 atmosphere of gas, and release that into the 7 mile cube. That's roughly UHV pressure.
How can a metal contain oil?
Aluminum foil that's food grade will have coatings on it to assist with food release. I assume that's part of why one side is more shiny than the other.
It'd be coated, but it's from processing, cold rolling metal generates a lot of heat, especially going that thin (thinnest I was around often was ~0.2mm), we'd often temper the material after processing, mainly for surface finish, mill rolls would be sprayed with lubricating coolant really close to what you'd see in use on a milling machine. This was with steel but same principle applies, pretty sure the lubricant we used is also labeled for use on aluminum mills, but you'd use food safe stuff for kitchen foil.
Thanks for the analogy, that really helps to put it in perspective. I was trying to work out the number of molecules per metre that would leave you with, but either my sense of scales is off kilter or I've got it wrong.
From what I can find, there are approximately 2.5e25 molecules per m^3^ at 1atm. Given an 11km cube has a volume of 1.3e12 m^3^, that gives around 2e13 molecules per m^3^ per m^3^ released. That sounds high, have I got the figures wrong somewhere?
The Voyager spacecrafts had some of their wires wrapped in, cleaned, store bought aluminum foil after a last minute change in the expected environment around Jupiter.
How have humans gone from the Stone Age to being able to manipulate subatomic particles in just a few thousand years?
And it’s not just normal subatomic particles. My mind is kind of blown when I think about this.
all 17 comments