This would make a really good moment in a horror/thriller movie where the unwitting protagonist suddenly realizes someone's been in the attic cause the thermal camera shows the footprints
post
What sort of thermal camera do you have and where did you get it? I've been nerding out on air sealing and insulating my house for the last year or so and I have been thinking about getting a thermal camera. I haven't looked into them at all though so I know very little about them.
I think it's in the top left of their photo.
Not OP but I have a FLIR that plugs in via USB to a phone and the associated app allows you to view what it sees. Like so:

Would you recommend it? What Model?
Yes, overall, I would. Some reviews of the app itself mention the device being fidgety to get started, and I do recall a modicum of difficulty, but obviously I made it through that.
For something I use infrequently, I'd say its a great gadget to have but check with your buddies to see if they have one you can borrow. And if not, and you buy one, make sure they know you have one they can borrow. Otherwise, I see this gathering dust for years and eventually the battery doesn't charge anymore.
This is the infiray p2 pro, got it on Amazon 4 years ago for $250, which was a decent price at the time.
It plugs into the bottom of my phone with USB C. Android. Works great.
It is technically practical and useful, but I must admit I don't use it as much as I thought I would.
Occasionally though, it hits the spot, extremely useful. Plus it's dang fun to play with!
Are you taking the old insulation out, or just putting new on top? If youβre removing it, Iβd like to know how you are managing it.
It's fiberglass, not vermiculite, so less likely to be asbestos contaminated. Though I didn't specifically test it.
I took out about 30 square feet of the stuff before deciding I didn't want to do that anymore.
It's clean, no dead stuff or mouse droppings, so I don't feel bad about leaving it in. It's easily compressible, old crappy stuff.
It's an 8 inch joist, so I squished some 10 inch unfaced batting on top of it, pressing the old stuff flat.
You can see the difference in temp on the ceiling:


In case you didn't know, compressing insulation can make it a lot less insulating. Not sure if the impact of 30% compression but figured I'd say something
I'd imagine that compressing 10 inch insulation into 8 inches will of course reduce efficiency compared to the full 10 inches. But I doubt it's much worse than if they just used 8 inch insulation in the first place.
It will be more expensive using 10 inch instead of 8 inch, but I doubt the difference between the two in the same 8 inches is significant.
Fun fact! Compressing 10 inches into 8 does reduce the R value that it could've been, but, compared to just buying 8 inch insulation, the R value is slightly higher.
So the only thing you're really losing is the extra money it costs for those two inches you aren't using.
In my case, the only way to get 8 x 15 unfaced is to special order it. I didn't want to, and it's good because I overestimated by 4 rolls, which would've been hard to return.
Additionally, in the sections where I had to remove the old insulation, I found it a little tricky to get the 10 inch stuff to even loft up to 8, I can't imagine buying 8 and trying to get it to loft properly.
Thanks for looking out for me! I was aware of this, here's the detailed comment:
Sorry about your insulation. I had to lol at the first sentence though. I doubt the previous owners let their kid put their feet all over the drywall - kids do kid things whether they're allowed to or not.
I can't imagine that little insulation in tat climate. I have two foot and it rarely gets to neg temps and only ever by a few degrees
Yeah, they had giant icicles every year, and tried adding a bunch of insulation to the back of the roof deck to stop it π€¦ββοΈ
Just insulate your ceiling, not the roof. Honestly, they had enough insulation on the roof deck they could've insulated the ceiling properly π€·ββοΈ
As it stands, I'll still be underinsulated. But it'll be a million times better than it was gonna be.
What is the thermal camera you have?
It's the infiray p2 pro, I don't see it for sale anywhere but I paid $250 for it 4 years ago. That was a decent deal back then.
It seems pretty accurate, when I look at interior walls, it agrees with a thermometer as to the room temp. Sometimes these things can be way off and only good for relative temps, but this one seems accurate.







all 24 comments