Hi everyone!

I'm shopping around for a pickup combo for a project guitar I'll be putting toghether.

Birdge humbucker, neck single coil.

Bridge I'm pretty set on a D-sonic or something similar. It's got enough push to do rock/metal without being a monotone screamy blockwave. Also I'm very familiar with this pickup and I know I'll like it.

And so that brings me to the neck. How do you best pair this with a single coil?

I have looked at sc sized himbuckers or rails. So do I just match the resistance as close as posdible to get similar volume?

all 6 comments

sorted by: hot top controversial new old
[–] 5 points 4 days ago* (1 child)

It's a matter of taste, mostly. For the neck pickup, you want a lower resistance, (the string amplitude at the neck position is higher, so you get more output).

The best thing you can do is find a (high output) single coil that, in demos, sounds good. You can match the volume by playing with the pickup height.

If you're not sure, you can also first buy a cheap version of what you're looking for. Guyker and Musiclily are good places to start for budget, but decent, clones.

If you want something more original, I can also recommend Tonerider. They have quite a selection of single coils. I haven't tried any of the single coils, but I have several of their pickups in my guitars and they sound amazing.

  • source
  • hideshow 1 child comment
  • [–] 3 points 4 days ago

    buy a cheap version of what you’re looking for.

    As someone who only uses "cheap" pickups you might end up finding one and sticking to it.

    I'd personally recommend Warman pickups out the UK if you live in that part of the world. Their selection is crazy from your industry standards to weird stuff like quadcoil humbuckers

  • source
  • parent
  • [–] 3 points 4 days ago

    I'm a huge fan of humbucker in the bridge and a P90 in the neck. I have a Fralin humless P90 and it is great. They also sell humless versions of single coils if that is important to you. They also have a huge guide section on their website that will help you: https://www.fralinpickups.com/general/

  • source
  • [–] 3 points 3 days ago

    I’m pretty happy with the Railhammer Nuevo 90 in the neck paired with the Hyper Vintage in the bridge on my Reverend Charger guitar. Very versatile pickup.

    You typically want more resistance in the bridge than neck since your bridge normally lacks some low end and can have a perceived volume drop, but that’s really just a general guideline. Really though, resistance is only useful for measuring pickups of the same design. Magnet strength and how many coils determine the output. This site explains it better: https://www.fralinpickups.com/2017/09/20/dc-resistance-guitar-pickups/

  • source
  • [–] 3 points 4 days ago (1 child)

    What genres are you trying to cover?
    If you aim at something heavy, a neck hot rails should do the trick.
    If you want to extend to other genres and have a "fusion" approach I'd try something more traditional, like an alnico strat neck and wiring that allows coil splitting in the middle position to balance the outputs. This is what I chose for my main, here's the wiring (it has a tele rails bridge but the concept is the same):

    There's no good or bad solution, it depends on what you want to play

  • source
  • hideshow 1 child comment
  • [–] [S] 2 points 3 days ago

    It's gonna be a guitar for metal in general. But every once in a while I do have to break out into some more traditional sounds as wel.

    The neck should mostly be for leads and cleans. So the main concern is mostly volume ballance, which as others have pointed I can remedy by adjusting the height.

    Thx for the wiring diagram!

  • source
  • parent