It's definitely bent, lower bar is bent just above the crank, also the two thinner tubes above the lower bar should be welded to the tube holding the saddle but are now almost touching the rear wheel. If you'd sit on this, chances are it'll break in half.

I agree, looks like a bad design. Someone that was overweight probably hit a curb on it or something

The back and front seem to be from 2 different bikes, with different size wheels. Front was a mixte and the twin tubes were chopped off when it was welded to the back, which seems to be from a single speed cruiser type bike. The downtube of the mixte was bent near the bottom bracket to make it fit.

It's a mess, whatever it is.