Thanks everyone who chimed into my first help request.

I picked up a set of winsor newton acrylic paint and a paint pen. That was definitely the right advice.

The red could go straight onto the board, but all the other colors needed to be backed by white.

Does anyone have good tips on mixing skin colors for paints? Right now all of these on the board were solid colors ,

you are viewing a single comment's thread
view the rest of the comments
[–] 2 points 7 months ago (2 children)

You should tell us what colors went onto that set!

Burnt Sienna (a very common color) is fantastic for skin tones for example, just add white to get a decent start, then nudge it with a tiny tiny amount of red, yellow or blue (for example).

Otherwise you can mix your own dark orange with some primaries to get started.

  • source
  • hideshow 2 child comments
  • [–] [S] 1 point 7 months ago (1 child)

    Black white

    Yellows, Ochre, cadmium, process

    Process Magenta, cadmium red

    Process cyan, ultramarine

    Permanent green

    Yellow ochre and white seems to be in the right direction for the skin or straw hat

  • source
  • parent
  • hideshow 1 child comment
  • [–] 2 points 7 months ago

    If ochre and white gives you a good starting point, you can add a little blue or green (Very little!) to desaturate the color a bit so he doesn't like "glow". No black! Black not only darkens but also kills off the paint.

    Add a touch of red to that base mix to see what you get (a smidgeon, the tiniest of touches).

    I'd go yellow ochre + a little bit red, then white. A bit more white for highlights (and a tiny bit yellow because the sun is yellow), less white for darker skin. Now you have dark, midtone and highlight. Add a little bit blue to the midtone to make a shadow color (because tje sun isn't in tje shadows but the sky might, and it's blue). Or test green, kills off the red in the skin very well.

    But you can get away with less of course, or more, mixing colors is fun!

  • source
  • parent