The hood above the hob had fallen off. The plugs stripped the wall. Made the holes bigger and used better plugs. Also put in some construction glue into the holes for good measure.

you are viewing a single comment's thread
view the rest of the comments
[–] 14 points 8 months ago (2 children)

I too love to daisy chain plug expanders. If I can somehow hide them behind a wooden panel, and maybe place them over a heat source, that would be my favorite.

In seriousness, if you checked that none of these thing draw large amounts of power, and arrange those that draw the most power closest (as in least plug hops) to the mains, your probably fine. If everything is under 100W each its probably fine

  • source
  • hideshow 2 child comments
  • [–] 5 points 8 months ago

    Independent of regular load, with daisy chaining you still have potential increase of return wire impedance, also for protective ground, which can lead to the circuit breakers not reliably switching in short circuit situations any more.
    So better not do it. For real.

  • source
  • parent
  • [–] [S] 1 point 8 months ago*

    Wires are 2.5mm2 and the extender is rated at 3680W, the total max load is a no more than 10W excluding the hood itzelf. So we wel withing the safety specs. No daisy chaining here, plug goes straight to a wall outlet

  • source
  • parent