Just had an oh-shit! moment at the library.

Depending on how things go, if the USB Implementers Forum can:

  • get the naming debacle figured out to where it's useful to people without sounding like gibberish.
  • develop USB-C to be more powerful than HDMI & DisplayPort.
  • lower licensing fees.

then USB-C could potentially overtake HDMI and DisplayPort in the graphics display cable market.


The reason I'm saying this is cause:

  • USB-C just_works.™️ for external/multi-monitor displays (it even works on my current dogshit NixOS laptop).
  • some manufacturers have already previously experimented/and sold graphics cards (GPUs) with USB-C as a display option.

As manufacturers already have to pay for HDMI/DisplayPort licensing fees, now it's just a matter of who can provide the most with the least overhead costs.

While it's not guranteed that USB-C is the true end solution, it does provide manufacturers with another option, which technically should lower costs for them to manufacture GPUs.

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 1 year ago (4 children)

They'll have to come up with a better connector, though. USB-C is just way too flimsy.

  • source
  • hideshow 4 child comments
  • [–] 3 points 1 year ago*

    Why come up with a new connector and not address the problem directly with a separate anchoring solution where needed? So far, solutions seem to go more rigid, but perhaps one that's more flexible and even automatically ejected when too much pressure is applied may be better for the cable and the connector. And if it isn't staying in, chances are you should probably be finding anchor points or alleviating tension for you longass/shortass cable.

  • source
  • parent
  • [–] 2 points 1 year ago (2 children)

    We already have display over this connector, the protocol is thunderbolt 4 over a USB-C form factor. You can buy computers and monitors with this already.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 1 year ago (1 child)

    Yes, I know. But I'm always scared of accidentally bending them out ripping them out. There should be some way to fasten the plug to the socket.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 1 point 1 year ago* (last edited 1 year ago)

    Are you using apple devices primarily?

    Good cables lock in nicely and are too stiff too bend at the connector. You can also get 90 degree ones if sticking out is a concern.

    Like the USB-C cable I have for display or high data transfer, is so thick/stiff it is hard to fold up. And the head around it is solid footprint so it resists pulling by putting force against the case it is in.

    Left is heavy duty for display or high data transfer, right is phone charger cord

  • source
  • parent