You can buy these with a calibration certificate for like $70, but I skipped the cert. Should be the same quality, cost me $16. I chose the version with the superior units of measurement.

you are viewing a single comment's thread
view the rest of the comments
[–] 8 points 1 year ago (6 children)

Now you can check your bin of cheapo tapes and chuck the ones that are off.

Also, you need to get a micro-point pencil for marking cuts, or a laser if you can afford it. That blob of graphite you've been using ain't gonna cut it anymore.

  • source
  • hideshow 6 child comments
  • [–] 5 points 1 year ago (2 children)

    He needs a CMM now to go with his gucci tape measure.

    Coordinate-measuring machine

    1000003915

    Its a machine that uses a very small probe to measure things with precision

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 3 points 1 year ago* (last edited 1 year ago) (1 child)

    I used to work in the alignments department at an aerospace company and we used something called a laser tracker made by Faro. It could measure down to ten-thousandths (0.0001) of an inch in X, Y, and Z up to 60 feet away. It's able to measure how much a 3 foot thick concrete floor flexes due to the gravitational pull of the moon.

  • source
  • parent
  • hideshow 1 child comment
  • I've never been impressed with laser alignment of tools; red laser diodes tend to put out a line that to my eyes looks about 1/8" wide.

    My miter saw tries to be clever and cheap about it and has a white LED positioned behind the blade so that it casts the blade's shadow on the work. Kinda wish they hadn't tried that because, with a miter saw, I can just lower the blade onto the work, line it up with the mark on my work, and then cut. Feels like putting holographic sights on an axe.

  • source
  • parent