[–] 1 point 1 year ago (1 child)

Yeah one mistake people make with stainless is trying to just take light cuts because "stainless is tough", but all that does is work harden as you try to go in. You really have to push through the cut to ensure you're always reaching fresh steel.

  • source
  • parent
  • context
  • [–] 3 points 1 year ago (2 children)

    Hole saws on stainless are tricky but it can be done. Lower speed and moderately high force are the ticket. Spin the drill full speed and you will work harden the stainless. Only plasma can save you then.

    And spend the money on cobalt bits!

  • source
  • [–] 2 points 1 year ago (2 children)

    Not if it's well lubricated.

    I've cut hundreds of holes, and did not loose a blade in the kit.

    As crude as they are, holes saws will last a long time and cut through a fair deal of depth material.

    Anchor lube or tap magic are your friends

  • source
  • parent
  • context
  • [–] 2 points 1 year ago (1 child)

    You could also use a wooden panel as a spacer to get a series 3 upper box over the raised edges of the lower box. If you're worried about the top box sliding off, the spacer can be bolted to the bottom of the upper box so that the raised edges still function as a barrier to capture the upper assembly.

  • source
  • view more: ‹ prev