Okay?
comments
Well it matters for what you're describing. I have a good idea of what your problem is and where you are. Just asking for confirmation. It's not a POST issue.
Now that is an interesting idea. I cant go into to much detail about the exact components but this particular port drives a DC motor. Power is injected to drive the motor.
Tbh, im not very familiar with ground loops. Have you had experiences with ground loops before?
I appreciate the quick response as well!
I dont mean to be rude but I dont think thats relevant without doxxing myself. You can look at my post history to know that I'm in the US and my computers are as well. They are far enough that I cannot travel to them.
multiport pci serial card.
What is plugged into this card?
Is it possible you're getting some kind of ground loop through a serial cable?
If it's happening across multiple machines and multiple PCI cards, I'd take a long, hard look at what they're plugging in to that PCI card.
Where are you in the world, and where are your users?
Thanks.
I dont think mine has integrated graphics. Its a rog hero crosshair viiii.
5 years old this June. Built it myself. No issues i couldn't solve or handle on my own until now.
We DID have the power shut off a week or so ago... my PC may have been on during that time. I honestly dont remember.
Could that be the culprit? Why was it fine for almost a whole week?
"Your device ran into a problem and needs to rest"
Me too, little computer, me too.
Do you have a separate GPU installed and does your CPU/motherboard have a built-in GPU? If so may as well try unplugging the GPU, plugging your monitor into the motherboard video port, and see if the system boots up. (this is just in case it's actually some GPU issue)
Otherwise, maybe a long shot - How old is your computer? You mentioned Windows 10 which makes me think it's possibly on the old side.. if something like 8-10+ years old it could be that the battery on the motherboard needs to be replaced and your entire system is acting up during reboots (this is especially obvious if there's any power outages). Try doing a BIOS reset - if there's a button on the motherboard to do that you should be able to press it, otherwise just take the motherboard battery out, unplug from power for something like 30 seconds, then plug power/battery back in and try a boot up. That could get you to at least boot up past the BIOS and you may want to consider buying a new battery to install into the motherboard. ... I don't know if Windows 10 itself would start after all this but at least you can find out if the hardware is still okay.
About as relevant as saying that your comparison is apples to oranges while still agreeing with your underlying point.
Also yes. I would hope people that want to engage in a real conversation would read past the first sentence.
Btw reaching for the ad hominem argument is quite petty imo.
I think my motherboard has shit the bed. Its been having odd voltage irregularities for a few months now but I just chalked it up to be a custom pc built by a moron.
I can now force the pc to boot from usb windows recovery tool but it still gets stuck on the asus logo. I leave it for an hour and it's the same.
My c drive is a nvme so ill need an enclosure or adapter to pull/clone the vital data...
If it deteriorated by itself it's a sure sign of dying storage. So back up what you can, try repartitioning and see how it goes. But I would replace it.
Pointing out that the joke isn’t helpful and would actually make the situation worse isn’t relevant?
You’re not all there in the head are you?
Do you even think that OP would read past the first sentence? The harm is already done. But go off if you want lmfao.
You do realize that this started by you taking seriously something someone said in jest? The jig should've hinted at when the original comment said "seriously though" so in fact you are the one who derailed the conversation by having tunnel vision on a comment that was a joke, or a light hearted poke at something that you said.was not helpful.
Thats… not how conversation works dude. If you’re not talking about a related topic, you aren’t contributing. Your derailing the conversation are best, or at worst, just a troll. That’s an incredibly ignorant and fallacious way of thinking, that everyone just needs to listen to your random thoughts?
That's how conversations work, people don't always fixate on the thing that you are trying to make a point on. They follow up with their points of view and things they can contribute with.
Weirdo
So you missed/ignored my only point and decided to just bloviate about your own thing?
Sure that makes total sense.
If Windows 10 fails to load enough times, it should offer to boot you into safe mode, however, it sounds like you might actually have a failing drive: I'd recommend cloning the drive ASAP to attempt data recovery (don't do anything else to the drive until you clone it). After that, you can try a repair, but if you have a failing drive it's best to stop using it after you get your data.
Good luck, I hope this helps!
Is your data encrypted? If not you can simply remove the c drive from your computer plug it into an external kit and view the contents from another computer.
Also, if you do connect it externally and you discover that the disc has issues and it's not just a memory problem or something, do not under any circumstances do a disc fix. I lost to drive that way, 2 TB of information just poof. So if you are able to access the drive but there is actually some issue with the drive just remove the data little by little as you can no matter how long it takes.
Edit: I should have added, you can also use a pre-installed environment OS or an operating system on a thumb drive to access your data. Though I would say for diagnostic purposes removal of the drive to an external kit tends to be better at separating issues with the drive from issues with your actual computer.
Jesus christ I am going to lose all of my data on my C drive, arent I?
You can't boot into safe mode then it's not a driver issue. You might need a pre-install environment. This may be a hardware issue. It also may be a bad update to the kernel.
Can you boot into the OS at all?
Nope.