68
Win10 custom PC stopped booting (lemmy.world)
submitted 8 months ago by to c/techsupport@lemmy.world
53 comments fedilink hide all child comments
 

Just started today. Was able to let it automatic repair and boot up. Was on for like 10 hours, shut down and tried to boot up some hours later. Now its completely stuck on automatic repair. Have unplugged all additional hdd's and then all unnesscarry USB's. Still doing this. Also removed my ethernet card. Still the same.

I cannot lose my data. I have several SSD's and HDD's with important files across several of them.

you are viewing a single comment's thread
view the rest of the comments
[–] 0 points 8 months ago* (6 children)

Use Arch btw

Can you boot into the OS at all? If so, at the sign in page, hold the Shift Key down while you select Power > Restart.

After your PC restarts to the Choose an Option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

You'll probably want safe mode with networking unless you already downloaded the driver.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 6 child comments
    •
  • [–] [S] 1 point 8 months ago* (5 children)

    Can you boot into the OS at all?

    Nope.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 5 child comments
    •
  • [–] 1 point 8 months ago* (4 children)

    If Windows 10 fails to load enough times, it should offer to boot you into safe mode, however, it sounds like you might actually have a failing drive: I'd recommend cloning the drive ASAP to attempt data recovery (don't do anything else to the drive until you clone it). After that, you can try a repair, but if you have a failing drive it's best to stop using it after you get your data.

    Good luck, I hope this helps!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] [S] 1 point 8 months ago (3 children)

    I think my motherboard has shit the bed. Its been having odd voltage irregularities for a few months now but I just chalked it up to be a custom pc built by a moron.

    I can now force the pc to boot from usb windows recovery tool but it still gets stuck on the asus logo. I leave it for an hour and it's the same.

    My c drive is a nvme so ill need an enclosure or adapter to pull/clone the vital data...

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 1 point 8 months ago* (2 children)

    Well, if that is the case, the good news is motherboards are one of the more not-so-expensive replacements: Definitely cheaper than a cooked processor or even bad RAM these days.

    On a related note: It's worth springing for a quality power supply if you don't already have one to make sure your next board doesn't get cooked too.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •