Several Debian hosts have become access-restricted amid the fight against scrapers, yielding collateral damage to tor users and users who simply chose the wrong browser.

The bugs.debian.org host should not be hard to reach. In any case, the Debian project apparently lacks the resources to fight bots while serving legit users. So we could use a caching frond-end, like teddit, which will give open access to bug reports.

Would be extra useful if it could aggregate bugs from multiple different bug trackers (e.g. launchpad and MS github).

 

This is similar to activistPnk’s proposal:

https://libretechni.ca/post/1027976

If I create a petition, fuck all that hard work of reading an inhuman amount of content and trying to dig up all the votes every lawmaker has cast on various bills. An AI should do that work for us. Tell me which lawmakers will like my petition, and /why/ they will like it, so that I can custom tailor the cover letter to them to appeal to their interests.

The AI should also cite its sources so I can verify.

 

!foss_requests@libretechni.ca was attacked by a spammer(usrahonehub@libretechni.ca). As the mod, I was able to ban the user from that specific community only.

When dealing with a manifestly malicious actor, the only tool at my disposal was “ban from community”. That community-specific feature is useful in cases of users who break the rules of the community. It’s a bit weak for addressing malicious attack. A threat agent banned from one community can retaliate by attacking other communities moderated by the same mod.

The only other action I can take is to “block user”. But I think that’s a user-level action that would actually be irresponsible for a mod to use because it would hide that user’s future attacks from the mod in other communities they moderate. Correct? (question: or is lemmy designed well enough to limit the 'block user' action to communities that blocking account does not moderate?)

Features needed

① Mods should be able to pre-emptively ban a malcious account from all communities that they moderate, not just the community that was attacked.

② When visiting that user’s profile, there also is no quick option to report the user to the admin. Perhaps DMing is sufficient, but it requires an extra level of ambition of the mods. OTOH, a quick button could be abused by mods. So I guess it’s not so clear cut.

 

mastodon-archive is very useful, for Mastodon. We need the same for Lemmy.

Update: this announcement over the loss of endlesstalk.org reinforces the need for a backup tool. A good fedi server should not be fragile and dependent on the admin maintaining backups.

Update 2: This post gives some of the API calls that would be useful:

https://lemmy.ml/post/31128657/19022698

 

cross-posted from: https://libretechni.ca/post/2238534

This is the thread:

https://libretechni.ca/post/2232241

The comment count is 3, but when I enter the thread I only find 2.

From a logged out browser, I can see 3 comments, thus the comment from @rako@tarte.nuage-libre.fr. Really bizarre because I have not configured my profile to block anything yet.

UPDATE: as someone pointed out, a profile setting for language was the culprit.

I wouldn’t exactly flip to “not a bug”, however, because the client should inform the user. The suppressed post should just be folded with a “(comment suppressed due to language preference)”.

And as a 2nd bug, the language parameter in the settings should make it clear what the setting does.

 

cross-posted from: https://libretechni.ca/post/2232241

I do not disclose email addresses anymore. Friends who want to reach me must use something else, like XMPP.

This arrangement works well enough but there is a snag. Tech-challenged folks often receive an email and they want to forward it to me. But email apps and XMPP apps are in separate bubbles.

In principle, the email app should have a “forward to xmpp” feature. But even if that were to exist (does it?), the low-tech demographic likely uses whatever web app Google pushes, which would not likely have such a feature.

So it seems a email→XMPP gateway is needed. I find this. That’s not a service. It’s kind of like: go build something. Is that where we are? Is that the state of the art?

 

cross-posted from: https://libretechni.ca/post/2163451

The fax service demands an email address for confirmation purposes. I give a disposable address using a service that lets me choose the username portion. So I choose an address like dysfunctionaladdress@disposablebox.xyz. Then I use that disposable acct to confirm the fax.

The fax service discloses the email address to the recipient. I would expect my email address wording would make it loud and clear to the recipient that it is unfit for sending email. But motherfuckers use it anyway! I suppose they are too lazy to send snail mail to the address I provided. So then their response to dysfunctionaladdress@disposablebox.xyz is publicly shared with the world. And not me, generally, because I don’t return to the disposable box.

It’s such a shit-show. How can I control for this? I need a fax service that does not force exposure of email address to recipients. I don’t mind paying to send a fax so long as it’s a pyg (pay-as-you-go) service. I can only find fax services that require a plan with monthly payments.

Any suggestions? The whole point in using a fax is to prevent the recipient from reaching me over email.

 

cross-posted from: https://libretechni.ca/post/2131666

Google blocked Android OS users from being able to move apps from internal storage to external storage in AOS 4 due to complaints of various glitches.

Google restored the option in AOS 5. In AOS 7 they disabled it again but gave an override option in the Developer Options menu. Maybe fair enough if avg. users can’t handle it.

But Huawei decided to intervene and impose an extra dose of nannying on their users by rendering the toggle in Developer Options impotent. Even advanced users are blocked from moving apps from internal to external storage. It’s a power-abusing overstep.

Of course all this nannying flies in the face of forced apps which cannot be removed.

I’m calling it asshole design because by tampering with a developer option they proactively made the conscious decision to nanny advanced users.

 

cross-posted from: https://libretechni.ca/post/1944375

If you scan paper receipts which you will then later submit copies of (either to your accountant, to a tax auditor, or to your employer), it is often useful to organize them on a PDF or to print them.

Today’s FOSS tools leave a lot to be desired. We have:

  • ImageMagick’s montage app, which lacks a smart rectangle-fitting algo. The user must specify which images to tile in what order. Not even sure it’s sophisticated enough to not overlap images after the first row when different dimensioned images are involved.
  • LaTeX is manual labor intensive. You must micromanage the orientation and position of images.
  • Arranged by hand when scanning: probably even more manually intensive than LaTeX because it requires a steady hand to precisely place the images.

Human limitations will often likely have some paper waste due to inefficient placement. A clever algorithm could determine orientation and placement of each receipt to optimise minimisation of whitespace, thus wasting less paper.

A receipt-specific montage algo could detect the font size of each receipt and either shrink or enlarge depending on user-supplied constraints. The goal should be as few A4, A3, or US letter pages as possible, but then enlarge receipts to make better use of the available page space.

In principle, someone with a big brain creates an algorithm distributed as a library. Then ideally there would be an app that uses the library to generate LaTeX code. There could also be an enhancement to ImageMagick’s montage app to do the same.

Rectangle Repacking

After the rectangle packing app is created, it would then be useful to have an app that does the opposite. We arbitrarily put many receipts on the glass for scanning. Some receipts might not relate to others with respect to who it is presented to. A GUI app would accommodate drawing many boxes to mark the boundaries of each receipt and give a way to assign a filename to each box and write the files. Then any selection of resulting files could be fed into the rectangle-packing app. ATM we have to use GIMP to crop a single box, write the file, then reload the original image and repeat for each receipt, taking care to remember what was already cropped.

 

If you scan paper receipts which you will then later submit copies of (either to your accountant, to a tax auditor, or to your employer), it is often useful to organize them on a PDF or to print them.

Today’s FOSS tools leave a lot to be desired. We have:

  • ImageMagick’s montage app, which lacks a smart rectangle-fitting algo. The user must specify which images to tile in what order. Not even sure it’s sophisticated enough to not overlap images after the first row when different dimensioned images are involved.
  • LaTeX is manual labor intensive. You must micromanage the orientation and position of images.
  • Probably even more manually intensive than LaTeX because it requires a steady hand to precisely place the images.

Human limitations will often likely have some paper waste due to inefficient placement. A clever algorithm could determine orientation and placement of each receipt to optimise minimisation of whitespace, thus wasting less paper.

A receipt-specific montage algo could detect the font size of each receipt and either shrink or enlarge depending on user-supplied constraints. The goal should be as few A4, A3, or US letter pages as possible, but then enlarge receipts to make better use of the available page space.

In principle, someone with a big brain creates an algorithm distributed as a library. Then ideally there would be an app that uses the library to generate LaTeX code. There could also be an enhancement to ImageMagick’s montage app to do the same.

Rectangle Repacking

After the rectangle packing app is created, it would then be useful to have an app that does the opposite. We arbitrarily put many receipts on the glass for scanning. Some receipts might not relate to others with respect to who it is presented to. A GUI app would accommodate drawing many boxes to mark the boundaries of each receipt and give a way to assign a filename to each box and write the files. Then any selection of resulting files could be fed into the rectangle-packing app. ATM we have to use GIMP to crop a single box, write the file, then reload the original image and repeat for each receipt, taking care to remember what was already cropped.

 

This problem is specific to the stock Lemmy client web app. When I visit !foss_requests@libretechni.ca, there is a NEXT button at the bottom. Clicking it simply refreshes the current page and does not advance to the next page. This problem manifests in both Firefox and Chromium based browsers.

Worth noting that other clients (e.g. alexandrite) work fine.

 

cross-posted from: https://libretechni.ca/post/1165681

The BBC’s radio schedule (on the linked page) is apparently only available in HTML format. I wonder if open data laws in the UK would compel them to make the schedule available in a machine-readable format like JSON or XML. Anyone know about the UK open data law in this regard?

 

The BBC’s radio schedule (on the linked page) is apparently only available in HTML format. I wonder if open data laws in the UK would compel them to make the schedule available in a machine-readable format like JSON or XML. Anyone know about the UK open data law in this regard?

 

I have accummulated half a dozen DAB radios. None of them have an antenna jack, thus limited to the stock built-in telescopic antenna. Most of the radios do not pick up BBC.

A Noxon DAB USB stick just appeared at a local flea market dirt cheap. A quick search suggests folks have apparently got it working on linux, and even rasberry pi. It comes with a tiny rubber ducky type of antenna but it’s detachable, so a high end antenna could perhaps replace it.

Also looks like this hardware is ~14 years old, so probably as mature as it’s going to get. Is anyone grabbing album art and scheduling metadata over these USB sticks?

I think in principle these sticks could run off a linux-based phone like PostmarketOS. Perhaps facilitating this idea.

 

These apps are designed to combine bittorrent tech with a web browser to enable people to share websites peer to peer, so excluded people can reach restricted access websites indirectly and enjoy some liberation from Cloudflare:

  • CENO [Android & Windows] has been around a while but apparently lost steam. It’s archived and had no development apparently in 4 years. It’s also broken in my attempt to launch it. (update: a fork of CENO apparently had a commit ~2 weeks ago.. so perhaps not a dead project after all)

  • Akoopa [linux] is new and was just presented at FOSDEM 2026. It’s a Tor Browser fork in very early stages. Apparently it only functions as a bittorrent client for grabbing static data at this point.

  • (update) Agregore looks like a healthy project.

I personally would be happy with just a backend. If I could pass an URL to rtorrent and end up with a local .mhtml file that any browser of my choice could open, I would be very happy.

 

cross-posted from: https://libretechni.ca/post/865880

Conceptually this seems like it could be a quite useful app for getting web pages. I learned about it from @morphite88 @thelemmy.club in this thread. It’s implemented on Android and Windows (not linux? wtf).

I installed the AOS version, which is ~100mb compressed and over 500mb unpacked. Wow.. wtf that is huge. It’s based on Firefox so I wonder if that’s where all the fat comes from.

In any case, the app simply does not work. When I launch the massive thing, it tries to contact a “bootstrap server”, and fails. I do not trust the clearnet and thus force CENO over Orbot (Tor). Perhaps that’s the issue.

CENO gives an option to enter a custom bootstrap server, but my searches come up empty. Perhaps this app it too unpopular to have alternative public servers.

 

Conceptually this seems like it could be a quite useful app for getting web pages. I learned about it from @morphite88 @thelemmy.club in this thread. It’s implemented on Android and Windows (not linux? wtf).

I installed the AOS f-droid version, which is ~100mb compressed and over 500mb unpacked. Wow.. wtf that is huge. It’s based on Firefox so I wonder if that’s where all the fat comes from.

In any case, the app simply does not work. When I launch the massive thing, it tries to contact a “bootstrap server”, and fails. I do not trust the clearnet and thus force CENO over Orbot (Tor). Perhaps that’s the issue.

CENO gives an option to enter a custom bootstrap server, but my searches come up empty. Perhaps this app it too unpopular to have alternative public servers.

 

cross-posted from: https://libretechni.ca/post/786769

FOSDEM presenter Jah Kosha will pitch the idea that the web can be made inclusive by introducing some middleware called #akoopa to share websites using torrents. This is severely needed. I cannot even read legal statutes that I am bound by because the gov publishes law on exclusive websites.

It’s similar to my youtube-torrent idea:

https://libretechni.ca/post/420147

 

FOSDEM presenter Jah Kosha will pitch the idea that the web can be made inclusive by introducing some middleware called #akoopa to share websites using torrents. This is severely needed. I cannot even read legal statutes that I am bound by because the gov publishes law on exclusive websites.

It’s similar to my youtube-torrent idea:

https://libretechni.ca/post/420147

view more: next ›