Digital atomic wall clock showing the time of 7:04 PM, an outside temperature of 158°F, and humidity of 99% outdoors.





edit:
A replacement sensor is just over $20, but I found this (see below) for $15, so both my wall clock and the new one can read off the same new, full functional sensor. So now it’s fixed.

It’s weird that the new one does outdoor and indoor temp, but not humidity. The old one does outdoor temp and humidity, but not indoor temp. And the new one isn’t an atomic clock. I had to set it manually.

all 19 comments

sorted by: hot top controversial new old
[–] 18 points 7 months ago* (3 children)

Maybe it's just really hot outside. Have you gone out to check? I'd put on some sunscreen first, just in case it's accurate.

  • source
  • hideshow 3 child comments
  • [–] 12 points 7 months ago

    Yes but how can you be sure it's wrong? Have you, for example, gone outside?

  • source
  • [–] 11 points 7 months ago (1 child)
  • [–] 9 points 7 months ago (2 children)

    Damned climate change.

    I bought a small tabletop atomic clock/thermometer at Radio Shack for $20 when I was 13. I'm in my mid-30s now, and it just died a few weeks ago. I actually mourned it a little, that thing was on my nightstand everywhere I've lived all these years.

  • source
  • hideshow 2 child comments
  • [–] 3 points 7 months ago (1 child)

    It might be a really easy fix. If you have this attachment to it then it might be worth opening it up. Might be something like a wire has come off the board and you can just solder it back on. Also try changing the battery to a verified working battery

  • source
  • parent
  • hideshow 1 child comment
  • [–] 4 points 7 months ago

    Unfortunately it's time just came. I'd already opened it up and fixed it once before. There were buttons that were barely working, the battery connectors stopped working and it only worked with the power cable (the atomic feature wouldn't sync from my bedroom and when I tried to move it to resync with the time change it wouldn't hold the settings, even with new batteries), the screen was starting to get weird and I decided that it wasn't worth it for a $20 clock that was over 20 years old when I have other clocks.

  • source
  • parent
  • [–] 9 points 7 months ago

    climate change is a bitch /s

  • source
  • [–] 5 points 7 months ago* (1 child)

    https://www.lacrossetechnology.com/pages/sensor-finder

    EDIT: IIRC, those things use button cells or something, so you might try replacing the battery first.

  • source
  • hideshow 1 child comment
  • [–] [S] 6 points 7 months ago* (last edited 7 months ago)

    The one I have takes AAA or AA. I failed to replace the batteries one time when they weee dead, and then they leaked. I cleaned it and put in new batteries. Ever since, the temperature an humidity swing wildly. Or sometimes just say NO for both readings. I did see how much a new sensor was at one point, but never got around to buying it.

    Here’s the sensor:

    https://www.lacrossetechnology.com/products/tx141th-bv4

  • source
  • parent
  • [–] 4 points 7 months ago

    Welp, looks like it's climate change season again.

  • source
  • [–] 3 points 7 months ago

    70c, in case anyone else couldn’t tell it was failing :)

  • source
  • [–] 3 points 7 months ago (1 child)

    Do you have the outside part in the sun or shade?

  • source
  • hideshow 1 child comment
  • For the outside temperature, ensure the thing's not in direct sunlight. For humidity, try taking the case of the thing apart and gently cleaning the sensor with isopropyl alcohol and a q tip.

  • source
  • [–] 3 points 7 months ago

    Why can it even register a temperature that high? You would think it would cut off somewhere around Death Valley in summer…

  • source